Organiser
Filtrer par machine :
Type de vue :
 
 WinUAE v4.10.0 Beta 10 (RC2) 
Lundi 12/12/22 à 14:17 par Firebrand
Une nouvelle beta a été publiée pour cet émulateur Amiga. La prochaine version stable devrait arriver dans une semaine maximum. Les améliorations sont les suivantes:
- Bumped version to 4.10.0
- 64-bit natmem limit increased to support G-REX PCI VRAM modification detection (Only draw lines that have been modified). Previously Voodoo 3 + G-REX always forced whole screen refresh. G-REX PCI memory space is above 2G "limit". Check also current limit to prevent "picasso_getwritewatch 87" log messages when running 32-bit version.
- SupraDrive AMAB5 and AMAB6 are also 8k. Removed extra duplicated 8k. Previous SupraDrive 2000DMA ROM is called "44-25B" (Hand written text on ROM label did say 44-25B but I thought it was some kind of checksum or something but SupraRomChk on SupraBoot3.8B install disk does detect it as "44-25B"). Updated 2000DMA ROM mapping, SupraRomChck now detects supported ROMs correctly. Remaining undumped official Supra ROMs are "33-11B" and AMAB1, listed inside SupraRomChk executable. (Also some AMAB5 and AMAB6 beta roms are listed)
- Added Hardital Synthesis/Super Big Bang v48.5 (previous was v53.1)
- Serial port ring indicator (RI) signal support (RI is shared with printer port SELECT line)
- Fix out of bounds buffer access when checking what should be written to write-only register that was read. (b5)
Télécharger WinUAE v4.10.0 Beta 10 (RC2) (32-bit)
Télécharger WinUAE v4.10.0 Beta 10 (RC2) (64-bit)
Site Officiel de WinUAE
 
 WinUAE v4.9.9 Beta 9 (RC1) FR 
Jeudi 08/12/22 à 11:43 par Firebrand
La dernière beta de WinUAE a été traduite en français sans délai par Tradu-France.
Télécharger WinUAE v4.9.9 Beta 9 (RC1) FR (32-bit)
Télécharger WinUAE v4.9.9 Beta 9 (RC1) FR (64-bit)
Tradu-France
 
 WinUAE v4.9.9 Beta 9 (RC1) 
Jeudi 08/12/22 à 11:40 par Firebrand
Les beta de WinUAE passent en release candidates. La prochaine version stable est donc en approche. Voici les nouveautés de cette version:
- Direct3D9 mode overlay mode didn't show Amiga screen in most configurations.
- JIT interrupt handling fix part 2.
- Debugger SMC detector cache flush does not anymore clear whole SMC state array (which can be huge if Amiga RAM is located in Z3 space). When state array needs to be reset, reset only RAM and ROM regions. Max SMC array size is now automatically same as highest RAM address.
- Autoresolution didn't do anything unless gfx_windowed_multi or gfx_fullscreen_multi had non-zero values (b1)
- Autoscale worked incorrectly in programmed modes. (b1)
- Disable GUI Wait for blitter checkbox in 68000/010 cycle-exact modes. Previously it was allowed but did nothing.
- CDTV/CD32 Quickstart didn't use new NVRAM Files -path (b1)
- Added Supra AMAB2 ROM to ROM scanner. (Seems to support at least 2000DMA and AutoBoot models). AMAB1 is still missing, previously added 2000DMA ROM most likely isn't AMAB1 because it only supports 2000DMA. 2000DMA ROM selection now also lists all AMAB roms because AMAB2-4 have 2000DMA support (AMAB5/6 dropped 2000DMA support) and ROM scanner selection logic does not support filtering ROMs that have same type.
Télécharger WinUAE v4.9.9 Beta 9 (RC1) (32-bit)
Télécharger WinUAE v4.9.9 Beta 9 (RC1) (64-bit)
Site Officiel de WinUAE
 
 vAmiga v2.2 
Mercredi 07/12/22 à 15:30 par Firebrand
Cet émulateur Amiga pour MacOS a été mis à jour. Les améliorations sont les suivantes:
v2.2:
- Fixed a bug that caused the emulator to crash when a Copper list was viewed in RetroShell.
- Fixed some minor GUI issues.
- Cleaned up some code.

v2.2 beta 1:
Enhancements:
- Added cycle-accurate 68010 emulation (#728, #742)
- Added experimental 68020 emulation (#728)
- Added VSYNC support (#731)
- The Cmd keys can be mapped to the Amiga keys without extra permissions (#749)
- Added support for mice with a third button (#747)
- The configurator panel can be opened as a window (#736)
- Added an automatic resizing option to the Window menu (#729)
- A broader range of hard-drive geometries is accepted now (#734)

Bug fixes:
- Fixed a bug related to sprite that were drawn outside the DIW (#743)
- Fixed a timing issue related to the SPRxPOS register (#750)
Télécharger vAmiga v2.2
Site Officiel de vAmiga
 
 NegaMAME v0.250-1 
Lundi 05/12/22 à 14:35 par Firebrand
Ce build de MAME prévu pour fonctionner avec le frontend Negatron a été mis à jour avec les sources de MAME v0.250.
Télécharger NegaMAME v0.250-1 (Windows)
Télécharger NegaMAME v0.250-1 (MacOS)
Télécharger NegaMAME v0.250-1 (Linux)
Site Officiel de NegaMAME
 
 RetroBat v5.0.0 
Dimanche 04/12/22 à 10:24 par Firebrand
Cet ensemble de script conçu pour configurer automatiquement le frontend EmulationStation avec RetroArch et différents émulateurs autonomes a été mis à jour. Les améliorations sont les suivantes:
New systems

– Adventure Vision
– amiga 4000
– apfm1000
– Arcadia 2001
– Astrocade
– BBC micro
– Camputers Lynx
– Philips CD-I
– Color Computer
– CreatiVision
– FM 7
– Gamate
– Game.com
– Game Pocket Computer
– GameBoy Advance 2 players
– Game Master
– LCD Games
– Megadrive-msu
– Mega-Duck
– Neo-Geo 64
– PV-1000
– Super Cassette Vision
– Super Game Boy
– Super A’Can
– TI-99
– Tomy Tutor
– TV Games
– VSmile

New features

– New Retrobat integrated Updater & Emulators download/update functionnality
– New content downloader
– Add incremental savestate support
– Add support for lightguns and Wiimote Guns, new lightgun games collection and removal of «*lightgun*» rom folder
– Sinden Lightgun support
– Duimon’s Mega-Bezel pack support
– Support of zipped roms decompression
– Add image viewer to Retrobat
– Autodetection of best mame version when set to auto
– XInput drivers for libretro
– Add: support for Retroachievements “Challenge” indicator

Cores

– a5200
– fbalpha (current)
– fceumm
– gearcoleco
– imageviewer
– mame2000
– mame2010
– swanstation

Standalone

– 3DSen (emulator not provided)
– Hypseus (fork of Daphne)
– no$gba (gba 2 players)
– pcsx2 1.7 SSE4 and AVX2 versions
– pcsx2 1.6 version moved to pcsx2-16 folder (pcsx2 folder used for 1.7 version)
– PinballFX3 (through Steam integration)
– ScummVM
– Yuzu early access

Miscellenaous

– moved all bioses to \bios folder and updated bios list md5 checks
– Add new music theme
– New version of Batgui.exe (not all functionalities have been ported yet)
– Group system features into submenus in Retrobat advanced configuration menu
– Option to invert A and B buttons
– Removed arcade system, replaced with individual system folders
– 64dd folder renamed n64dd
– New SDL version
– Additional features directly accessible from Retrobat to avoid setting up the features in the emulators (PS3, PS2, Yuzu, scummvm, dolphin, …. and many others)

Retrobat

– New Website
– New Wiki
Télécharger RetroBat v5.0.0
Site Officiel de RetroBat
 
 WinUAE v4.9.9 Beta 8 FR 
Dimanche 04/12/22 à 10:16 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v4.9.9 Beta 8 FR (32-bit)
Télécharger WinUAE v4.9.9 Beta 8 FR (64-bit)
Tradu-France
 
 WinUAE v4.9.9 Beta 8 
Dimanche 04/12/22 à 10:14 par Firebrand
Une nouvelle beta de cet émulateur Amiga a été publiée. Les améliorations sont les suivantes:
- RTG to chipset mode (non-interlaced) switch didn't enable native mode filter (b7)
- If CIA-A TOD counting was PSU tick based, ticks that were delayed until next scan line (due to CIA internal TOD counting delays) were lost. (b1)
- Added GVP A1208 Z2 RAM + SCSI board. It is basically GVP Series II Z2 SCSI controller + RAM expansion in different form. Uses usual GVP Series 2 SCSI ROMs. If A1208 is emulated and Z2 RAM is enabled, Z2 RAM gets GVP A1208 Z2 RAM autoconfig data. A1208 GVP internal device ID is 0x97.
- JIT mode interrupt handling restored, JIT needs "different" interrupt handling than non-JIT modes for best performance. (b5)
- uaegfx blitter emulation was accidentally disabled since b4.
- uaegfx b1 update had wrong operator in masked 8-bit DST=SRC blitter function (Turbotext scrolling in 8-bit) (b1)
- uaegfx non-basic blitter functions (for example mask set or not commomly used) didn't handle overlapping source and destination correctly. (Turbotext scrolling in 8-bit mode)
- gfx_left_windowed and gfx_top_windowed config file entries replaced with gfx_x_windowed and gfx_y_windowed. Reason was swapped coordinates but to keep backwards compatibility, new config entries have been added instead of fixing it by swapping them. Old config entries still work.
- A4000 Quickstart mode set PSU tick CIA-A TOD timing but A4000 does not have PSU tick hardware.
- 68020 cycle-exact timing adjustment (Lionheart whdload slave v2.3)
- Increased A1200 68020 approximate speed slightly. (Many AGA demos had slowdowns). CE mode is not changed.
- Rare SupraDrive 2000DMA boot ROM was finally dumped. Support added.
- Debugger memwatch command parsing changed. Some parameters got skipped. Value match is now V.
- Debugger string to integer parser error condition support added. Potentially dangerous commands are now aborted if expected address can't be parsed (like 'g '), previously failed string to integer conversion returned zero value.

This version should restore performance (CPU and uaegfx) back to 4.9.1 levels.

If there is no major issues left, official should get released in next 2 weeks. Plan that rarely works but maybe this time..
Télécharger WinUAE v4.9.9 Beta 8 (32-bit)
Télécharger WinUAE v4.9.9 Beta 8 (64-bit)
Site Officiel de WinUAE
 
 WinUAE v4.9.9 Beta 7 FR 
Dimanche 27/11/22 à 15:00 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v4.9.9 Beta 7 FR (32-bit)
Télécharger WinUAE v4.9.9 Beta 7 FR (64-bit)
Tradu-France
 
 WinUAE v4.9.9 Beta 7 
Dimanche 27/11/22 à 14:58 par Firebrand
Une nouvelle beta pour cet émulateur Amiga pour Windows a été publiée. Les améliorations sont les suivantes:
- When on the fly changing floppy type from FloppyBridge drive to normal or vice versa, disk change is now simulated automatically.
- floppyXprofile (x=drive number) config file entry can be used to change drive type on the fly using uae-configuration. Replaces floppyXtype which uses magic number parameters (it is still supported). Floppy type can be for example "35dd" or "35hd" or "floppybridge". (TODO: floppybridge: support)
- CPU instruction prefetches are marked with "I" and data accesses with "D" in DMA debugger (for example "CPU-RWI")
- Do not allow JIT FPU option if no FPU is selected.
- If copper used last cycle of frame: following copper instruction (=very last instruction of copper before it restarts) was shown incorrectly in DMA debugger (visual bug only).
- Special empty copper cycles where copper allocates the cycle but leaves it unused are now marked with "C" in DMA debugger.
- Disk DMA write to nowhere (no drives selected) never finished. This (and reading which was fixed in b6) was working in older version, probably broke in b1.
- Disk DMA write DMA slots now have correct order (Read DMA: slots are filled from right to left, write DMA: filled from left to right).
- Floppy index sync (CIA-B flag) CIA interrupt bit was "sticky" in some situations. (b1)
- CHD CD audio sync fix. (Always use logical block access method)
- Some filter options still used non-interlace filter mode settings when interlace mode filter was active.
- D3D11 mode integer scaling artifacts fixed. (b1)
- D3D11 shader support code leaked ID3D11RenderTargetView, causing problems when shader or parameters were changed on the fly.
- Double clicking windowed mode window title bar always switched to fullscreen mode (should only switch if Shift pressed=Fullscreen or Control pressed=Fullwindow is pressed). Possibly Windows version dependant.
- DIWSTRT and DIWSTOP same vertical start and end was unreliable (James Pond 2 intro glitch)
Télécharger WinUAE v4.9.9 Beta 7 (32-bit)
Télécharger WinUAE v4.9.9 Beta 7 (64-bit)
Site Officiel de WinUAE
 
 Clock Signal 25/11/2022 
Samedi 26/11/22 à 14:04 par Firebrand
Cet émulateur multi-systèmes pour MacOS a été mis à jour. Les améliorations sont les suivantes:
- addresses flag errors in the 68000's shift operators, improving compatibility;
- adds support for Apple II .HDV files, and adds a SCSI status indicator; and
- fixes a potential stuck-key problem with using the keyboard as an ersatz joystick under macOS.
Télécharger Clock Signal 25/11/2022
Site Officiel de Clock Signal
 
 WinUAE v4.9.9 Beta 6 FR 
Mardi 22/11/22 à 12:03 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v4.9.9 Beta 6 FR (32-bit)
Télécharger WinUAE v4.9.9 Beta 6 FR (64-bit)
Tradu-France
 
 WinUAE v4.9.9 Beta 6 
Dimanche 20/11/22 à 15:54 par Firebrand
Une nouvelle beta pour cet émulateur Amiga a été publiée. Voici la liste des nouveautés:
- Interlace mode filter crash fix (b5).
- Disk read DMA started (without DSKSYNC) and reading "nothing" (no drives connected): disk DMA never finished. (CDTV boot hang without DF0:)
- CIA B timer counting timer A underflows or CNT: generated interrupt was 1 timer count too early.
- 68060 without FPU and executing FPU instruction that uses -(an) or (an)+ addressing mode: address register's original value was restored twice when F-line exception stack frame was being created. Second time it used invalid register value causing D7 to be modified.
- Audio interrupts and AUDxDAT processing delays fixed. They were too long (2 CCK) when correct delay is only 1 CCK. 2 CCK appeared to be correct because previously interrupt timing was wrong.
- Keep CPU halted when keyboard reset keys are kept pressed. (b3 reset change update)
- EHB mode was unreliable in AGA mode (b5)
- 68010+ BKPT illegal instruction exception had stacked PC pointing to next instruction but it should point to BKPT.
- 68010 DIVU overflow condition undefined N flag behavior updated. (DIVS overflow undefined flags are still not fully correct)
- Copper/blitter bug tested, updated and confirmed and is enabled by default again (only if 68000 and cycle-exact). This is the infamous chipset bug that can cause copper pointer to blitter pointer copy if copper was waiting, CPU wrote to COPJMPx during odd cycle and blitter was active. Not 100% accurate (modulos are not added correctly when glitch happens) in line mode because line mode internal "micro-operations" are not fully correct (exactly when pointers change, modulo is added etc, invisible operations that don't affect line mode output).
Télécharger WinUAE v4.9.9 Beta 6 (32-bit)
Télécharger WinUAE v4.9.9 Beta 6 (64-bit)
Site Officiel de WinUAE
 
 Messinfo.dat v0.249 (11.38) 
Vendredi 11/11/22 à 14:52 par Firebrand
Le dernier fichier additionnel de ProgettoSNAPS pour cycle de MAME a été publié. Voici les changements:
- 11.38 11/10/2022: Aligned files to 0.249 version.
Télécharger Messinfo.dat v0.249 (11.38)
Site Officiel de Messinfo.dat
 
 GameEx v18.35 (.NET 6, 64-bit) 
Jeudi 10/11/22 à 11:53 par Firebrand
De nouvelles versions de ces frontends multi-systèmes ont été publiées. Les changements ne sont pas connus.
Télécharger GameEx v18.35 (.NET 6, 64-bit)
Télécharger GameEx v18.35 (32-bit)
Télécharger GameEx Arcade Edition v18.35 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.35 (32-bit)
Site Officiel de GameEx
 
 GameEx et GameEx Arcade Edition v18.34 
Mercredi 09/11/22 à 13:55 par Firebrand
Ces frontends multi-systèmes ont reçus trois mises à jour consécutives. Mais seules les notes pour la v18.32 sont (pour l'instant?) disponibles:
v18.32:
- For complete MAME list customization if required you can now specify a custom listxml file.
Télécharger GameEx v18.34 (.NET 6, 64-bit)
Télécharger GameEx v18.34 (32-bit)
Télécharger GameEx Arcade Edition v18.34 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.34 (32-bit)
Site Officiel de GameEx
 
 WinUAE v4.9.9 Beta 5 FR 
Mardi 08/11/22 à 14:34 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v4.9.9 Beta 5 FR (32-bit)
Télécharger WinUAE v4.9.9 Beta 5 FR (64-bit)
Tradu-France
 
 GameEx et GameEX Arcade Edition v18.31 
Lundi 07/11/22 à 12:12 par Firebrand
Ces frontends multi-systèmes ont été mis à jour. Une seule nouveauté est à signaler:
- New and updated HBMAME profile and download.
Télécharger GameEx v18.31 (.NET 6, 64-bit)
Télécharger GameEx v18.31 (32-bit)
Télécharger GameEx Arcade Edition v18.31 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.31 (32-bit)
Site Officiel de GameEx
 
 WinUAE v4.9.9 Beta 5 
Lundi 07/11/22 à 12:08 par Firebrand
Une nouvelle beta de pour cet émulateur Amiga a été publiée. Voici la liste des nouveautés:
- If copper used last cycle in scanline and last cycle was even cycle (PAL 226) and it wanted next possible copper cycle and it was free: copper will allocate cycle 1 (Copper won't use it, neither can CPU or blitter. Cycle is allocated because it is 2 cycles from 226 but it is unusable because it isn't even cycle) and cycle 2 (copper uses this normally) of next scanline. This was implemented before 4.9 but was lost when custom emulation cycle allocation rewrite was done.
- Reading from non-existing register always returned FFFF instead of data that previous cycle's possible DMA access transferred. (Equipose / Complex hang)
- Don't keep "interrupt active" flag set if IPL is >0 but CPU interrupt mask is higher or same as current interrupt level. Only check it if mask gets lowered. Prevents unnecessary status flag checks between each emulated instruction.
- Fill color palette entries with pseudo-random contents at power up. (Except COLOR0 to not get annoying color flash at startup. Which does randomly happen on real HW.)
- EHB mode OCS/ECS vs AGA difference emulated. OCS/ECS number of active plane does not affect EHB (only HAM, DPF or KILLEHB disables EHB). For example if plane count changes mid scanline from 6 to 5, EHB stays active and remaining data in plane 6's shifters still appear as EHB plane. But on AGA plane count change causes switch to normal color mode immediately, plane 6's remaining data selects color palette entries 32 to 63. (G.Rowdy / Desire)
- In some situations if same scan line enabled and disabled EHB, whole scan line was drawn without EHB. (G.Rowdy / Desire)
- Replaced C-library pseudo-random number generator with simple xorshift algorithm.
- Ultra extreme overscan mode screenshot was vertically clipped.
- Remove interlace artifacts option fixed. (b1)
- Added optional chipset interlace mode filter panel settings. If enabled and at least one entry is different than normal native mode filter panel, filter is selected when current native is interlaced and switched back to normal native filter when mode switches back to non-interlaced.
- Added semaphore locking to A2065 emulation, previously it was possible to free A2065 resources while some other thread (for example slirp) was currently accessing its on-board RAM.
- Fixed serial port MIDI emulation hang. (b1)
Télécharger WinUAE v4.9.9 Beta 5 (32-bit)
Télécharger WinUAE v4.9.9 Beta 5 (64-bit)
Site Officiel de WinUAE
 
 GameEx et GameEx Arcade Edition v18.30 
Jeudi 03/11/22 à 11:48 par Firebrand
Ces frontends multi-systèmes ont été mis à jour, mais les changements ne sont pas connus.
Edit: Les nouveautés ont été dévoilées avec un peu de retard:
- Adds Retroarch emulator profiles for MAME 2013, 2013 Plus and 2010.
- MAME Listxml files can now be used as map fiiles. Hyperlist, and MAME software lists were already supported.
Télécharger GameEx v18.30 (.NET 6, 64-bit)
Télécharger GameEx v18.30 (32-bit)
Télécharger GameEx Arcade Edition v18.30 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.30 (32-bit)
Site Officiel de GameEx
 
<< Page précédentePage suivante >>