Organiser
Filtrer par machine :
Type de vue :
 
 WinUAE v5.1.0 Beta 9 
Lundi 27/11/23 à 15:48 par Firebrand
Une nouvelle beta de cet émulateur Amiga a été publiée. Voici la liste des changements:
- If program updated RTG (uaegfx) hardware mouse cursor colors only (not shape), mouse cursor was not updated to match new colors.
- Detect compatible files in deeper subdirectories only when dropping archive file to floppy drive, do not do it when dropping to WB. (b1)
- If executable is mounted as disk image, do not automatically enable turbo floppy mode if program does disk DMA accesses that can't be used for normal track reads. (Booting executable programs that do [weird] disk tests work normally)
- Quickstart Host Configuration was not restored correctly (off by one because new entry was added, missed one place where index should have been increased by 1)
- Fixed KS 3.2 A3000 ROM checksum.
- Added disassembler optional parameter to always show EA. Previously EAs (An),(An)+ or -(An) An content was not shown.
- Disk info ("?" in floppy and quickstart panel) font size was not adjusted to current DPI/font size setting.
- If (weird) programmed mode without programmed vblank (VARBEAMEN=1 but VARVBEN=0) had less lines than hardwired PAL or NTSC mode, vblank interrupts still triggered, even when trigger line (last PAL or NTSC line) was never reached.
- Do not special case $FFFF,$FFFE copper wait as "no need to care about copper until restarted" if really weird and wide (max 256 CCKs) programmed mode is active.
- "Restart" GUI button didn't reset current windowed/fullscreen mode flag, causing GUI to re-open in last active mode GUI position (if full-window or fullscreen) instead of default windowed mode position.
- Possible fix for crash after reset in some configurations (Kickstart ROM area was left unallocated)
- Normal WB programmed modes randomly used wrong HB/VB values when positioning the screen. (5.0)
Télécharger WinUAE v5.1.0 Beta 9 (32-bit)
Télécharger WinUAE v5.1.0 Beta 9 (64-bit)
Site Officiel de WinUAE
 
 WinUAE v5.1.0 Beta 8 FR 
Dimanche 19/11/23 à 15:33 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v5.1.0 Beta 8 FR (32-bit)
Télécharger WinUAE v5.1.0 Beta 8 FR (64-bit)
Tradu-France
 
 WinUAE v5.1.0 Beta 8 
Dimanche 19/11/23 à 15:32 par Firebrand
Cet émulateur Amiga a reçu une nouvelle beta. Voici les changements apportés:
- Built-in DMS unpacking support update: validate packed track data under or overflow after decrunching and reject track as damaged if detected. Fixes incorrect brute force decryption key detection of some encrypted DMS files. (THE_PLAGUE_1.DMS and some others)
- Always enable DXGI_PRESENT_ALLOW_TEARING in D3D11 modes if driver supports it. This might improve variable sync compatibility and video/audio stability.
- CIA timer chaining (Timer B counts timer A underflows) only worked in CE modes. (Broke when CIA emulation was rewritten recently)
- Hardreset now randomizes seed value (if config entry "rndseed" is zero). b1 changelog mentioned it but seed wasn't randomized.
- Some weird and stupid VPOSW writes caused vblank processing to restart continuously in default and smaller overscan modes, making emulation really slow. (Action Replay 3)
- Writing to DSKLEN with bit 15 set didn't start disk DMA immediately if previous disk DMA had already been finished. Only if bit 15 is cleared DSKLEN needs to be written twice to start DMA.
- Emulated Paula disk read DMA bug (HRM says only "... Also, the last word in a disk-read DMA operation may not come in (that is, one less word may be read than you asked for)"). This is now emulated mostly accurately (still tests to do to find full details) if not floppy turbo mode. Previously emulation always returned requested number of words. This also implements "early" DMA end interrupt which fixes demo Knin Peaks / Reality. Demo's loader can only work if bug exists, without bug it will miss sectors, retries and crashes.
- Loading config file caused immediate crash if it had hardfile2 config entry with physical geometry and also geometry file and geometry file name was created from physical device id string and it included '/' character. Fixed parsing crash and when autogenerating geometry file name, replace all unsafe characters with underline characters.
- ALT-TABing from D3D11 fullscreen RTG mode and then back caused hardware mouse cursor to disappear until its shape was modified by Picasso96.
Télécharger WinUAE v5.1.0 Beta 8 (32-bit)
Télécharger WinUAE v5.1.0 Beta 8 (64-bit)
Site Officiel de WinUAE
 
 GameEx et GameEx Arcade Edition v18.54 
Vendredi 17/11/23 à 14:33 par Firebrand
Un correctif a été apporté à ses frontends multi-systèmes:
- Video downloads for Steam working again.
Télécharger GameEx v18.54
Télécharger GameEx Arcade Edition v18.54
Site Officiel de GameEx
 
 GameEx et GameEx Arcade Edition v18.53 
Jeudi 16/11/23 à 12:31 par Firebrand
Ces frontends multi-systèmes ont été mis à jour. Les améliorations sont les suivantes:
- New auto configuration ArcadePC TeknoParrot support.
- Fixes to dialog box and auto update.
Télécharger GameEx v18.53
Site Officiel de GameEx
 
 Messinfo.dat v0.260 (11.51) 
Lundi 06/11/23 à 12:42 par Firebrand
Ce dernier fichier informatif pour les machines non arcade MAME clôt le cycle de mises à jour d'AntoPISA pour MAME v0.260.
- 11.51 05/11/2023: Aligned files to 0.260 version.
Télécharger Messinfo.dat v0.260 (11.51)
Site Officiel de Messinfo.dat
 
 ClrMAME Pro v4.048c 
Dimanche 05/11/23 à 13:12 par Firebrand
Une nouvelle version de ce gestionnaire de ROMs a été publiée. Voici la liste des changements:
Some minor work on delta chd messages. Keep in mind that in general there are some open issues with chdman:
- fixed: wrong "Error while..." message after delta operation succeeded but backup is disabled.
- misc: minor changes to the delta output messages
Télécharger ClrMAME Pro v4.048c (32-bit)
Télécharger ClrMAME Pro v4.048c (64-bit)
Site Officiel de ClrMAME Pro
 
 WinUAE v5.1.0 Beta 7 FR 
Dimanche 05/11/23 à 13:07 par Firebrand
La traduction en français de la dernière beta de WInUAE est déjà disponible grâce à Tradu-France.
Télécharger WinUAE v5.1.0 Beta 7 FR (32-bit)
Télécharger WinUAE v5.1.0 Beta 7 FR (64-bit)
Tradu-France
 
 WinUAE v5.1.0 Beta 7 
Dimanche 05/11/23 à 13:05 par Firebrand
Une nouvelle beta a été publiée pour cet émulateur Amiga qu'on ne présente plus. Les améliorations sont les suivantes:
- Fixed on screen keyboard transparency in D3D9/11 modes. It previously only worked in D3D11 HDR mode.
- Ignore "Main window always on top" misc setting in D3D11 mode. D3D10+ windowed mode is not possible if always on top window flag is set. Previously this caused fallback to D3D9 mode. This does not make sense in my opinion and it does not seem to be mentioned in documentation but CreateSwapChainForHwnd() fails if it is set. Debug D3D11 DLLs also report that it failed due to unsupported window flag.
- Do not do unnecessary graphics setup reset if RTG mode changed but only parameter that changed was color depth and mode is not fullscreen with match depth if possible enabled. (b1)
- If D3D11 screen init decided that new requested mode has same parameters as old mode, skip also other unnecessary graphics reinitializations.
- Do not enable temporary frameskip in warp mode if debug overscan mode is enabled, it can cause random glitches. Warp mode normally enables frameskip in non-ce modes.
- Ignore backwards or same line vertical VPOSW writes if it was CPU write and CPU emulation is not in accurate mode. This basically reverts VPOSW updates to pre-5.0 behavior when CPU is not at least in memory cycle exact mode, supporting only usual "fake NTSC" modes. At least AR3 does stupid things with VPOSW that can't work if CPU is not slow enough.
- Added generic support for emulation of IDE controllers that have in-circuit programmable flash/EEPROM chip.
- Flash/EEPROM emulation updates (support write protection enable/disable commands, parallel EEPROM partial writes supported)
Télécharger WinUAE v5.1.0 Beta 7 (32-bit)
Télécharger WinUAE v5.1.0 Beta 7 (64-bit)
Site Officiel de WinUAE
 
 WinUAE v5.1.0 Beta 6 FR 
Vendredi 03/11/23 à 15:22 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v5.1.0 Beta 6 FR (32-bit)
Télécharger WinUAE v5.1.0 Beta 6 FR (64-bit)
Tradu-France
 
 ClrMAME Pro v4.048b 
Lundi 30/10/23 à 14:49 par Firebrand
Plusieurs versions de ce gestionnaire de ROMs ont été publiées suite à la prise en charge des delta CHDs (similaire au système parent/clones des ROMs, mais pour les CHDs) qui nécessitait plusieurs correctifs. Voici les changements:
v4.048b
- fixed: wrong delta chd proposals in full merged mode (identical chds)

v4.048a
- fixed: unneeded scan crashes/exits
- misc: limiting delta chd support for chd version >=5

v4.048
- added: delta chd support, show warnings, support convert/revert of chds
- fixed: MAME 260 "samples" issue (is shown as unneeded and not found)
Télécharger ClrMAME Pro v4.048b (32-bit)
Télécharger ClrMAME Pro v4.048b (64-bit)
Site Officiel de ClrMAME Pro
 
 Clock Signal v29/10/2023 
Lundi 30/10/23 à 14:41 par Firebrand
Cet émulateur multi-systèmes pour MacOS a été mis à jour. Les améliorations sont les suivantes:
- includes fixes by @ryandesign to the sequence of addresses accessed by the Apple II for video generation, correcting broken instances of vapour lock;
- includes further build-system fixes by @ryandesign that reintroduce support for macOS 10.13; and
- corrects address generation logic for the undocumented 6502 instructions SHS, SHX, SHY and SHA.
Télécharger Clock Signal v29/10/2023
Site Officiel de Clock Signal
 
 NegaMAME v0.260-1 
Jeudi 26/10/23 à 12:40 par Firebrand
Ce build de MAME prévu pour fonctionner avec le frontend Negatron a été mis à jour vers MAME v0.260.
Télécharger NegaMAME v0.260-1 (Windows)
Télécharger NegaMAME v0.260-1 (MacOS)
Télécharger NegaMAME v0.260-1 (Linux)
Site Officiel de NegaMAME
 
 ClrMAME Pro v4.047b 
Lundi 23/10/23 à 16:52 par Firebrand
Ce gestionnaire de ROMs a été mis à jour. Les améliorations sont les suivantes:
Tiny update for MAME's latest CHD feature "delta chds". I will think about additional options (like optionally marking found not-delta chds and maybe a conversion tool/update opption) but for this I need more time.

- fixed: don't mark delta chds as missing
- misc: updated unrar (6.24.0)
Télécharger ClrMAME Pro v4.047b (32-bit)
Télécharger ClrMAME Pro v4.047b (64-bit)
Site Officiel de ClrMAME Pro
 
 WinUAE v5.1.0 Beta 6 
Dimanche 22/10/23 à 15:20 par Firebrand
Une nouvelle beta de cet émulateur Amiga a été publiée. Voici la liste des changements:
- On screen Amiga keyboard.
- GUI pad control mouse move now wraps around.
- Fixed Sound panel floppy sound GUI, switching floppy drives forced current configuration to selected drive. (b1)
- If Z2/Z3 IDE controller board with more than 1 IDE channel was configured more than once, second board's HDF was also mounted to first controller's second channel.
- Game ports panel Remap/Test panel only worked once (broke in some previous beta)
- Do not unnecessarily reinitialize D3D11 when switching modes if window size and filter settings do not change. This optimization is not in D3D9 mode.
- RTG<>native switch in fullwindow mode didn't properly check if both modes had same monitor (default monitor vs specific selected monitor was always detected as different monitor even if specific selected monitor was also default monitor), causing unnessary window reopen.

On screen keyboard details:
- Look is quite basic but it needs to be scalable to any resolution. Lines and fonts only, can't have any complex graphics.
- Pad button 4 is now default mapped to open/close on screen keyboard input event (if loaded config has button 4 mapped to something else, button is not mapped to OSK)
- Pad button/d-pad that normally controls Amiga joystick moves keyboard selection. Joystick movements and button presses are not sent to Amiga side as long as OSK is open.
- Fire button press = send selected key's press
- Fire button release = send selected key's release
- Second button press = toggle state of selected key. Keep shift or control or other qualifier key pressed.
- Second button release = does nothing.
- Keyboard layout is US layout + 2 keys that are used in international layout variants + few bonus "keys". I probably won't bother with other layouts because this is only meant for situations where key presses like "Press F1 to start game" are needed. It is impossible to know what layout program expects anyway if it reads keyboard directly or reads keyboard scan codes.
- If GUI is entered when OSK is open, GUI pad control is automatically enabled.
- Perhaps some useful other extra "keys" will be added later.
- Transparency only in D3D9 and D3D11 modes.
- This has nothing in common with GUI pad control.
Télécharger WinUAE v5.1.0 Beta 6 (32-bit)
Télécharger WinUAE v5.1.0 Beta 6 (64-bit)
Site Officiel de WinUAE
 
 WinFellow v0.5.10 FR 
Dimanche 15/10/23 à 19:46 par Firebrand
La dernière version de cet émulateur Amiga a été traduite en français par l'équipe de Tradu-France.
Télécharger WinFellow v0.5.10 FR
Tradu-France
 
 WinUAE v5.1.0 Beta 5 FR 
Samedi 14/10/23 à 12:28 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v5.1.0 Beta 5 FR (32-bit)
Télécharger WinUAE v5.1.0 Beta 5 FR (64-bit)
Tradu-France
 
 WinUAE v5.1.0 Beta 5 
Samedi 14/10/23 à 12:26 par Firebrand
Une nouvelle beta de cet émulateur Amiga a été publiée. Les améliorations sont les suivantes:
- Screen mode switch (for example native<>RTG) could have caused blank screen, especially in D3D9 mode, if old and new mode had identical size. (b1)
- Restoring statefile without FPU when configuration with FPU was active: FPU was not disabled.
- Fixed random flickering last line in non-interlaced fields/fields+ modes.
Télécharger WinUAE v5.1.0 Beta 5 (32-bit)
Télécharger WinUAE v5.1.0 Beta 5 (64-bit)
Site Officiel de WinUAE
 
 Messinfo.dat v0.259 (11.50) 
Vendredi 13/10/23 à 16:29 par Firebrand
Les données de MAME v0.259 ont été intégrées à ce fichier informatif qui clos le cycle de mise à jour de ProgettoSNAPS pour cette version de MAME.
- 11.50 10/12/2023: Aligned files to 0.259 version.
Télécharger Messinfo.dat v0.259 (11.50)
Site Officiel de Messinfo.dat
 
 WinFellow v0.5.10 
Mercredi 11/10/23 à 15:38 par Firebrand
La Release Candidate 1 de cet émulateur Amiga pour Windows est maintenant considéré comme la version stable. Seule la numérotation est modifiée, l'émulateur est identique à la RC-1.
Télécharger WinFellow v0.5.10
Site Officiel de WinFellow
 
<< Page précédentePage suivante >>