Actualités - Planet Emulation

Télécharger WinUAE v6.0.0 Beta 32 (RC2) (32-bit)

WinUAE v6.0.0 Beta 32 (RC2)

Mardi 17/06/25 à 13:10 par Firebrand

Une nouvelle beta de cet émulateur Amiga pour Windows a été publiée. Voici la liste des changements:
- Paula audio timing calculation used programmed vertical timing but hardwired PAL/NTSC horizontal timing when in RTG mode with inactive Amiga screen in doublescan mode. (b22)
- Fixed genlock emulation horizontal scaling and horizontal lightpen positioning, horizontal blanking changes broke it in some early beta.
- Pause zeroed display line count OSD (That normally shows 313p etc).
- At least Sound stereo delay GUI setting become empty instead of showing "-" when entering GUI again. Possibly others too. (Old bug)
- If ECS/AGA programmed mode registers got badly enough corrupted causing Agnus DMA to steal all cycles and CPU was accessing chip RAM: exiting UAE would become impossible because CPU never got any cycles. Normally CPU emulator checks state changes between each instruction.
- Added some missing translation strings.

Télécharger WinUAE v6.0.0 Beta 32 (RC2) (64-bit)

Télécharger WinUAE v6.0.0 Beta 31 FR (32-bit)

WinUAE v6.0.0 Beta 31 FR

Lundi 09/06/25 à 13:13 par Firebrand

La dernière version de WinUAE a été traduite en français par l'équipe de Tradu-France.

Télécharger WinUAE v6.0.0 Beta 31 FR (64-bit)

Télécharger WinUAE v6.0.0 Beta 31 (32-bit)

WinUAE v6.0.0 Beta 31

Dimanche 08/06/25 à 14:07 par Firebrand

Une nouvelle beta de cet émulateur Amiga pour Windows a été publiée. La prochaine version stable devrait arriver dans deux semaines. En attendant, voici la liste des changements:
- Adjusted CDTV CD+G subchannel read timing. CDTV CD+G graphics should be stable again. Timing is quite critical, every subchannel byte generates interrupt, CPU runs short interrupt handler which reads the byte and acknowledges the interrupt, then returns. There are 96 subchannel bytes per CD audio frame = 75 * 96 bytes per second. One interrupt about every 2.2 scan lines.
- Refresh indicator feature is working again (show_refresh_indicator=true command line option). Now detects all graphics changes, previously only bitplane changes counted. Also can be more CPU heavy because it stores whole RGB output, not just bitplane chunky values. (v6 chipset emulation does not anymore have separate temporary chunky bitplane buffers). Not supported in fast drawing modes.
- Force Denise drawing thread output flush before drawing next slice in beamrace mode.
- Fixed FDI disk image support. Was broken long time ago, decoder hung in infinite loop.
- Added CIA hack to JIT and fastest CPU mode that guarantees when running timer is read or timer is stopped by clearing START bit, following timer read has always counted down at least single tick from initial start value. Some programs try to detect CPU speed by running short CPU code and time it using CIA timer. But fail to handle zero CIA timer count resulting in divide by zero crash.
- OpalVision emulation now blanks left and right edges and control line data on top. (King of Karate has dark blue line at top which seems to be part of image)
- OpalVision OpalTest test program works again without flickering.
- Fixed possible crash during reset when using emulated video port display hardware, including genlock.

Télécharger WinUAE v6.0.0 Beta 31 (64-bit)

vAmiga v4.2

Dimanche 08/06/25 à 14:03 par Firebrand

Cet émulateur Amiga pour MacOS a été mis à jour. Les améliorations sont les suivantes:
v4.2:
Changes since latest beta:
- FileSystem code cleanup

v4.2b2:
Enhancements:
- Names of imported or exported files are properly sanitized (#912)

Bug fixes:
- Querying the mouse button state via the POTxDAT registers is now possible (#913)

v4.2b1:
Enhancements:
- vAmiga now supports folder import for hard drives (#904)
- Improved file inspector (#910)
- The file system creator uses the correct OFS / FFS block ordering (#909)
- Fixed some O(n^2) performance bottlenecks in the MutableFileSystem class (#908)
- RetroShell can manage shader settings
- Shader settings are saved to workspaces

Bug fixes:
- Fixed a bug in the polling click detector (#907)
- Fixed an issue with the white-noise effect (#911)

Télécharger vAmiga v4.2

Télécharger WinUAE v6.0.0 Beta 30 (32-bit)

WinUAE v6.0.0 Beta 30

Lundi 02/06/25 à 13:45 par Firebrand

Une nouvelle version s'ajoute à cette série de beta fleuve de WinUAE. Les améliorations sont les suivantes:
- Default config without default.uae and without Quickstart is now A500 cycle-exact. (Was approximate mode previously)
- Default Quickstart mode is now cycle-exact (most compatible) A500. (Was approximate mode previously)
- Added partial support for some undocumented (undocumented as not used by CDTV extended ROM) CDTV CD commands. Added 2052 and 2340 CD sector size support, probably was never used (CDTV CD also accepts 512 and 1024 but they appear to be unusable), removed 2328 and 2352 which are not supported by CDTV CD.
- Added 2052 (4+2048) and 2340 (4+2336) CD sector size support to generic CD image emulator. (4 byte header + data).
- Recursive event callbacks fixed. This caused missed events in some situations.
- Add harddrive Lock option didn't lock all partitions if drive had MBR partition table + one or more known partitions (broke long time ago)
- If direct harddrive access read or write returns error (for example access denied), log the error.
- Hard reset again resets color registers to random values (except background color which is set to static value)
- First VPOSHW write after reset also set Agnus horizontal counter=1, causing small blanking glitch during boot.

Télécharger WinUAE v6.0.0 Beta 30 (64-bit)

Télécharger WinUAE v6.0.0 Beta 29 FR (32-bit)

WinUAE v6.0.0 Beta 29 FR

Vendredi 30/05/25 à 13:58 par Firebrand

La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.

Télécharger WinUAE v6.0.0 Beta 29 FR (64-bit)

Télécharger GameEx v19.26

GameEx v19.26

Mercredi 28/05/25 à 13:06 par Firebrand

Ce frontend multi-systèmes a été mis à jour. Voici la liste des changements:
v19.26:
- Fixes error when installing due to COM surrogate process open.
- New artwork on server.
- Preparation for big emulator setup improvements coming soon.

v19.23:
- New and updated system databases.

Site Officiel de GameEx

WinUAE v6.0.0 Beta 29

Mercredi 28/05/25 à 13:00 par Firebrand

Une nouvelle beta pour cet émulateur Amiga pour Windows a été publiée. Les améliorations sont les suivantes:
- Fast mode drawing always masked chip ram addresses to regular chip RAM size causing corrupted graphics if 32-bit chip RAM was enabled.
- Right edge horizontal scrolling glitch is now only emulated correctly (as in glitches correctly) in accurate emulation modes. Fast CPU modes "fixes" the glitch. I don't normally like "fixing" hardware design flaws but I didn't find any other simple solution to fix this problem without huge changes to fast drawing modes. This might work better in some future version. Normally this condition (Very large right edge overscan + horizontal scrolling) is rarely visible because it looks very ugly.
- Remove interlace artifacts very glitchy scrolling fixed (b28). There still can be single line that has wrong graphics before it gets redrawn in next frame but because it happens at the same as another usual glitch that affects all lines hen bitplane pointers get updated while scrolling, it is not important problem.
- If only difference between odd and even field scrolling value in BPLCON1 was AGA-only hires or shres bits, emulation mode that emulates odd/even planes separately was not selected and odd planes used same scrolling value as even planes.
- Fixed crash when doubleclicking config tree view root node.
- b25 interlace change was not fully working, it was still possible to get for example autoscale filter mode display jumping between long and short field heights.
- Borderblank 1 shres delay emulation got broken partially in b24 update. (Only supported in accurate modes)

Télécharger WinUAE v6.0.0 Beta 29 (32-bit)

Télécharger WinUAE v6.0.0 Beta 29 (64-bit)

Télécharger WinUAE v6.0.0 Beta 28 FR (32-bit)

WinUAE v6.0.0 Beta 28 FR

Dimanche 25/05/25 à 13:01 par Firebrand

La dernière beta de cet émulateur Amiga a été traduite en français par l'équipe de Tradu-France.

Télécharger WinUAE v6.0.0 Beta 28 FR (64-bit)

Site Tradu-France

Fichiers additionnels pour MAME v0.277 (partie 2)

Samedi 24/05/25 à 18:56 par Firebrand

Deux nouveaux fichiers additionnels ont été publiés pour MAME v0.277:
Messinfo.dat v0.277 (14.04):
- 2025/05/22 14.04: Aligned files to 0.277 version.

Series.ini v0.277 (11.04):
- Items RENAMED (4) : (chleagul) to (chleaguel), (chleagxa) to (chleaguexa), (chleagxb) to (chleaguexb) and (megat) to (megata).
- Series UPDATED (14) : "Amidar", "Champion Poker", "Crazy Bugs * Slot", "Cruis'n USA", "Gunlock", "Head On", "Joker Poker", "King of Fighters", "Long Hu Bang", "MegaTouch", "Phoenix", "Rail Chase", "Space Invaders" and "Street Fighter".

Télécharger Messinfo.dat v0.277 (14.04)

Télécharger Series.ini v0.277 (11.04)

ProgettoSNAPS

WinUAE v6.0.0 Beta 28

Samedi 24/05/25 à 18:51 par Firebrand

Une nouvelle beta de cet émulateur Amiga pour Windows a été publiée. Voici la liste des changements:
- Display panel Overscan TV modes didn't do anything if "No scaling" filtering mode was selected.
- Fixed Remove interlace artifacts last line flicker in some overscan modes and "out of sync" line when drawing mode changed from accurate to fast mode.
- Removed Chipset panel Subpixel emulation checbox. v6 emulation is always subpixel perfect in accurate modes. Config file support is not removed. (backwards compatibility)
- Only known Apollo 500/2000 boot ROM seems to only support AT500/AT2000 variant, driver does not initialize if hardware SCSI config bit is set. Now SCSI is disabled by default (making it AT500/AT2000), option added to Expansions panel. Possibly got broken when Apollo accelerators got supported or updated which use exact same SCSI hardware.

Télécharger WinUAE v6.0.0 Beta 28 (32-bit)

Télécharger WinUAE v6.0.0 Beta 28 (64-bit)

Télécharger vAmiga v4.1.2

vAmiga v4.1.2

Samedi 24/05/25 à 18:47 par Firebrand

Cet émulateur Amiga pour MacOS a été mis à jour. Une seul changement est à signaler:
Bug fixes:
- (Hopefully) fixes a crash during hibernation (#845)

Télécharger GameEx v19.22

GameEx v19.22

Jeudi 15/05/25 à 18:40 par Firebrand

Ce fontend multi-systèmes a été mis à jour, mais les changements ne sont pas connus.

Site Officiel de GameEx

vAmiga v4.1.1

Mercredi 14/05/25 à 13:35 par Firebrand

Cet émulateur Amiga pour MacOS a été mis à jour. Les améliorations sont les suivantes:
Bug fixes:
- Fixed a bug that left the emulator window untitled after saving a workspace (#893)
- Fixed a bug related to RTC emulation (#903)
- Fixed a bug in the directory importer (#904)

Télécharger vAmiga v4.1.1

Télécharger GameEx v19.20

GameEx v19.20

Mardi 13/05/25 à 13:38 par Firebrand

Ce frontend multi-systèmes a été mis à jour. Un seul changement est à signaler:
- Fixes to GameEx Online.

Site Officiel de GameEx

WinUAE v6.0.0 Beta 27

Mardi 13/05/25 à 13:36 par Firebrand

Voici encore une nouvelle beta pour cet émulateur Amiga. Les améliorations du jour sont les suivantes:
- Interlace timing was broken, fast drawing mode calculations affected non-fast modes. (b26)
- Remove interlace artifacts works again (b26)
- "Default" filter mode now adjusts to Display panel overscan selection.
- Fast mode superhires + Display panel resolution set to hires had horizontal scrolling glitches.
- Add Harddrive listed some CF cards (maybe others too) as unaccessible MBR partitioned with single partition even if they had RDB (or nothing). Broken in some earlier beta.
- 65HC05 and 8039 keyboard MCUs was not fully reset when reconnecting keyboard on the fly.

This does not change "right edge glitch" emulation. I am still not decided what to do with it. "Fast mode" does not have enough information to handle this properly but I also don't want to disable fast mode completely when this side-effect is possible. (It can be possible and even happening in other situations but most of them can't be seen)

Télécharger WinUAE v6.0.0 Beta 27 (32-bit)

Télécharger WinUAE v6.0.0 Beta 27 (64-bit)

Télécharger WinUAE v6.0.0 Beta 26 FR (32-bit)

WinUAE v6.0.0 Beta 26 FR

Dimanche 11/05/25 à 16:36 par Firebrand

La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.

Télécharger WinUAE v6.0.0 Beta 26 FR (64-bit)

Télécharger WinUAE v6.0.0 Beta 26 (32-bit)

WinUAE v6.0.0 Beta 26

Dimanche 11/05/25 à 16:33 par Firebrand

Une nouvelle beta de cet émulateur Amiga a été publiée. Voici la liste des changements:
- Automatic resize filter added size multiplier twice in some situations.
- Collision CLXDAT register reads are now also horizontally cycle based (but not yet pixel perfect). CLXDAT reads are still line based if configuration does not have at least memory cycle-exact or CPU is in fastest possible mode. No real world program cares and also collisions are used really rarely.
- Programmed mode that enabled programmed HBLANK and programmed HSYNC (BEAMCON0 VARHSYEN and/or VARCSYEN) without VARBEAMEN used default PAL/NTSC positioning instead of using programmed HBLANK values for more accurate positioning.
- 68HC05 keyboard controller emulation keyboard matrix last row was not working.
- Fixed fast drawing mode last line having wrong color, mostly in programmed modes. (Last line color changing to black when mouse is near the bottom of screen and back to border color when moving mouse upwards).
- FPU FMOVEM to/from extended uses "original" code when JIT is enabled. This is test fix for reported "random" FPU value changes in JIT FPU mode.

Télécharger WinUAE v6.0.0 Beta 26 (64-bit)

Télécharger WinUAE v6.0.0 Beta 24 FR (32-bit)

WinUAE v6.0.0 Beta 24 FR

Dimanche 04/05/25 à 16:19 par Firebrand

L'avant-dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.

Télécharger WinUAE v6.0.0 Beta 24 FR (64-bit)