Organiser
Filtrer par machine :
Type de vue :
 
 GameEx v19.22 
Jeudi 15/05/25 à 18:40 par Firebrand
Ce fontend multi-systèmes a été mis à jour, mais les changements ne sont pas connus.
Télécharger GameEx v19.22
Site Officiel de GameEx
 
 vAmiga v4.1.1 
Mercredi 14/05/25 à 13:35 par Firebrand
Cet émulateur Amiga pour MacOS a été mis à jour. Les améliorations sont les suivantes:
Bug fixes:
- Fixed a bug that left the emulator window untitled after saving a workspace (#893)
- Fixed a bug related to RTC emulation (#903)
- Fixed a bug in the directory importer (#904)
Télécharger vAmiga v4.1.1
Site Officiel de vAmiga
 
 GameEx v19.20 
Mardi 13/05/25 à 13:38 par Firebrand
Ce frontend multi-systèmes a été mis à jour. Un seul changement est à signaler:
- Fixes to GameEx Online.
Télécharger GameEx v19.20
Site Officiel de GameEx
 
 WinUAE v6.0.0 Beta 27 
Mardi 13/05/25 à 13:36 par Firebrand
Voici encore une nouvelle beta pour cet émulateur Amiga. Les améliorations du jour sont les suivantes:
- Interlace timing was broken, fast drawing mode calculations affected non-fast modes. (b26)
- Remove interlace artifacts works again (b26)
- "Default" filter mode now adjusts to Display panel overscan selection.
- Fast mode superhires + Display panel resolution set to hires had horizontal scrolling glitches.
- Add Harddrive listed some CF cards (maybe others too) as unaccessible MBR partitioned with single partition even if they had RDB (or nothing). Broken in some earlier beta.
- 65HC05 and 8039 keyboard MCUs was not fully reset when reconnecting keyboard on the fly.

This does not change "right edge glitch" emulation. I am still not decided what to do with it. "Fast mode" does not have enough information to handle this properly but I also don't want to disable fast mode completely when this side-effect is possible. (It can be possible and even happening in other situations but most of them can't be seen)
Télécharger WinUAE v6.0.0 Beta 27 (32-bit)
Télécharger WinUAE v6.0.0 Beta 27 (64-bit)
Site Officiel de WinUAE
 
 WinUAE v6.0.0 Beta 26 FR 
Dimanche 11/05/25 à 16:36 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v6.0.0 Beta 26 FR (32-bit)
Télécharger WinUAE v6.0.0 Beta 26 FR (64-bit)
Tradu-France
 
 WinUAE v6.0.0 Beta 26 
Dimanche 11/05/25 à 16:33 par Firebrand
Une nouvelle beta de cet émulateur Amiga a été publiée. Voici la liste des changements:
- Automatic resize filter added size multiplier twice in some situations.
- Collision CLXDAT register reads are now also horizontally cycle based (but not yet pixel perfect). CLXDAT reads are still line based if configuration does not have at least memory cycle-exact or CPU is in fastest possible mode. No real world program cares and also collisions are used really rarely.
- Programmed mode that enabled programmed HBLANK and programmed HSYNC (BEAMCON0 VARHSYEN and/or VARCSYEN) without VARBEAMEN used default PAL/NTSC positioning instead of using programmed HBLANK values for more accurate positioning.
- 68HC05 keyboard controller emulation keyboard matrix last row was not working.
- Fixed fast drawing mode last line having wrong color, mostly in programmed modes. (Last line color changing to black when mouse is near the bottom of screen and back to border color when moving mouse upwards).
- FPU FMOVEM to/from extended uses "original" code when JIT is enabled. This is test fix for reported "random" FPU value changes in JIT FPU mode.
Télécharger WinUAE v6.0.0 Beta 26 (32-bit)
Télécharger WinUAE v6.0.0 Beta 26 (64-bit)
Site Officiel de WinUAE
 
 WinUAE v6.0.0 Beta 24 FR 
Dimanche 04/05/25 à 16:19 par Firebrand
L'avant-dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v6.0.0 Beta 24 FR (32-bit)
Télécharger WinUAE v6.0.0 Beta 24 FR (64-bit)
Tradu-France
 
 WinUAE v6.0.0 Beta 25 
Dimanche 04/05/25 à 16:17 par Firebrand
On reste dans l'univers Amiga avec cette nouvelle beta pour WinUAE. Voici la liste des changements:
- Fixed possible drawing buffer overflow when drawing blanked lines.
- HAM state was reset when HDIW start matched even if HDIW was already open.
- Switching BPLCON3 BRDSPRT off mid-screen didn't immediately recalculate sprite visibility.
- Fast mode stopped drawing bitplane early if display needed horizontal scrolling ("misaligned" DDFSTRT and/or BPLCON1). Should fix remaining fast mode missing graphics problems near right border. (Usually only visible if HDIW ended after bitplane)
- Display panel "Resolution autoswitch" works again. (Was gone in v6 rewrite)
- Cirrus Logic SVGA chip emulation now only supports planar VGA when using text mode, 4 color or 16 color graphics modes. Can increase performance in normal SVGA modes.
- Double (not fields or fields+) interlace mode in automatic scaling/resize/etc mode never recalculated size/position when switching to interlace mode. (It kept waiting for both odd and even field but now only full frames are drawn in doubled interlace mode)
Télécharger WinUAE v6.0.0 Beta 25 (32-bit)
Télécharger WinUAE v6.0.0 Beta 25 (64-bit)
Site Officiel de WinUAE
 
 vAmiga v4.1 
Dimanche 04/05/25 à 16:14 par Firebrand
Cet émulateur Amiga pour MacOS a été mis à jour. Les améliorations sont les suivantes:
Bug fixes:
- Overclocked CPUs could overflow the color register recorder and crash the emulator (#897)
- Fixed a HAM drawing bug (#894)
- Fixed a bug in the DDF logic that could mess up bitplane DMA (#899)
- The Rom dropbox for extended Roms was broken
- Fixed some smaller issues related to workspaces (#896)
- The CIA dashboard panel now reports the chip activity as expected (#898)
- Fixed a display bug in the RetroShell debugger (#900)

Enhancements:
- Added a special „RGB direct“ color palette. Intended for more stable regression testing
- Now shipping with the latest Aros Roms (from Feb. 2025)
Télécharger vAmiga v4.1
Site Officiel de vAmiga
 
 GameEx v19.19 
Samedi 03/05/25 à 14:51 par Firebrand
Deux nouvelles versions de ce frontend multi-systèmes ont été publiées, mais il y a seulement des information au sujet de la v19.18:
- Fixed MAME Bezels not extracting after download in the installer.
Télécharger GameEx v19.19
Site Officiel de GameEx
 
 NegaMAME v0.277-1 
Vendredi 02/05/25 à 16:57 par Firebrand
Ce build de MAME prévu pour être utilisé avec le frontend Negatron a été mis à jour vers MAME v0.277.
Télécharger NegaMAME v0.277-1 (Windows)
Télécharger NegaMAME v0.277-1 (Intel) (MacOS)
Télécharger NegaMAME v0.277-1 (Apple Silicon) (MacOS)
Télécharger NegaMAME v0.277-1 (Linux)
Site Officiel de NegaMAME
 
 WinUAE v6.0.0 Beta 24 
Vendredi 02/05/25 à 15:54 par Firebrand
Une nouvelle beta pour cet émulateur Amiga a été publiée. Les améliorations sont les suivantes:
- If bitplane DMA was active behind vertical blanking, it was incorrectly used for automatic scaling horizontal start/end detection.
- More horizontal start/end adjustments to exactly match 5.3.1 manual filter behavior.
- TV overscan modes are now almost same as in older versions. Narrow is slightly wider.
- Increased event queue buffer size, multiple audio channels with AUDxLEN=1 could overflow it.
- When filter mode like autoscale detects mode change, force full redraw (without this fast mode lines are not guaranteed to be redrawn with correct position or blanking)
- Borderblank 1 shres pixel early end emulation was incorrectly emulated also in border area. In some situations, when HDIW position and/or borderblank state was modified during border, it could have caused single wrong colored pixel glitches.
- Fixed bitplane garbage in right side of display in some fast drawing mode conditions (Usually hires or shres and HDIW end was larger than bitplane end)
- (Pointless) VHPOSW (like AR3 does) writes without CE caused graphics glitches in fast modes.
- Line count OSD (313p etc) now shows "----" (like FPS counter) when display sync is not stable. Not very useful to show mostly random values in weird situations.
- Fixed A1000 direct (without using boot ROM + KS disk) KS ROM loading.
Télécharger WinUAE v6.0.0 Beta 24 (32-bit)
Télécharger WinUAE v6.0.0 Beta 24 (64-bit)
Site Officiel de WinUAE
 
 GameEx v19.17 
Mercredi 30/04/25 à 17:32 par Firebrand
Ce frontend multi-systèmes a reçu une mise à jour mineure. Voici de quoi il s'agit:
- More performance improvements.
Télécharger GameEx v19.17
Site Officiel de GameEx
 
 GameEx v19.16 
Lundi 28/04/25 à 17:12 par Firebrand
Deux nouvelles versions de ce frontend multi-systèmes ont été publiées. Apparemment, l'une des ces versions corrige un problème à l'installation à cause de fichiers manquants.
Télécharger GameEx v19.16
Site Officiel de GameEx
 
 WinUAE v6.0.0 Beta 23 
Samedi 26/04/25 à 16:30 par Firebrand
Une nouvelle version pour cet émulateur Amiga a été publiée. Voici la liste des changements:
- Automatic center filter mode fixed.
- ECS superhires filtered lores implemented. Filtered lores odd/even genlock data is also now "filtered".
- In some situations right border had 1 lores pixel difference between border and hblank depending on drawing mode.
- Fixed AVI recording crash.
- Fast drawing mode + NTSC: left and right border glitches should be finally fixed.
- Fixed fast draw mode last line changing between blank/border when mouse was near the border.
- When reset was executed, new screen width included old short/long state. In NTSC mode new screen width was randomly 2 lores pixels wider.
- When in fast non-CE mode, switching from RTG to chipset and if fast RGA buffer become full, it was possible for CPU chipset writes to arrive in Denise side in different order, causing strange side-effects. (Frontier black screen)
- Partial fix for A2024 emulation. (All display port monitors need some updates)
- Fixed slirp use after free bug (Andreas Grabher)
- Added (config file only currently, "rtg_noautomodes=true") option that disables uaegfx automatically generated screen modes. With Picasso96 v3.4+ and P96Prefs new modes can be created manually, just like when using real hardware. Note: Old Picasso96 and/or PicassoMode utility don't support manual uaegfx modes.
- Added 3840x1080 to known uaegfx resolutions list ("known" = gets static mode id if autogenerated)
Télécharger WinUAE v6.0.0 Beta 23 (32-bit)
Télécharger WinUAE v6.0.0 Beta 23 (64-bit)
Site Officiel de WinUAE
 
 GameEx v19.14 
Vendredi 25/04/25 à 17:48 par Firebrand
Plusieurs versions consécutives ont été publiée pour ce frontend multi-systèmes, mais aucune information à leur sujet n'a été donnée.
Télécharger GameEx v19.14
Site Officiel de GameEx
 
 RomVault v3.7.4 
Mardi 22/04/25 à 15:55 par Firebrand
Ce gestionnaire de ROMs a été mis à jour. Voici les améliorations de cette version ainsi que celles de la v3.7.3 qui n'avait visiblement pas été publique:
v3.7.4:
- This release has a number of nice bug fixes, also now supports File Only Directories (ZipAsFile). A very nice simple addition is reporting % completion when scanning large files. Plus many more core cleanups (Trying to keep the code up to date.) Also added is a built in .nfo file viewer, which is a kind of cool addition.
- Well there are probably lots more features and fixes I should mention in this release but just wanted to get this version out to you all.

v3.7.3:
Feature Updates:
- Added the ability scan archives as files with a new “mixed” archive type setting
- Added a new “Files Only” ToSort type
- Added the ability to reorder ToSort directories
- Improved the 7z cache logic to ignore zero byte files and prevent the cache directory from growing too large
- Improved fixing performance over Samba shares by optimzing empty directory detection

Bug Fixes:
- Fixed a display issue to disable the “Make New Folder” button in DatVault when Master Directories was selected
- Fixed irrelevant UI related error messages in RV CMD
- Fixed a hard crash that could occur when choosing to Fix ROMs before Find Fixes
- Fixed a case sensitivity issue with umlaut characters
- Fixed a bug where files could be leftover in the 7z cache directory after a fix completes
- Fixed a bug where some files were not deleted after a ZipMove operation
Télécharger RomVault v3.7.4
Site Officiel de RomVault
 
 GameEx v19.09 
Mardi 22/04/25 à 15:47 par Firebrand
Deux nouvelles versions de ce frontends ont été publiées. Les améliorations sont les suivantes:
v19.09:
- Performance improvements.
- Karaoke enabled again but only supports video files.

v19.08:
- To allow old Windows versions whilst supporting the latest .net runtime - Windows 10 and 11 will now run GameEx under .net 8. The .net 8 Windows desktop runtime will be installed as part of the setup.
- Fixes Gamebase support.
Télécharger GameEx v19.09
Site Officiel de GameEx
 
 GameEx v19.07 
Lundi 21/04/25 à 14:26 par Firebrand
Une nouvelle version de ce frontend multi-systèmes a été publiée. Elle corrige un problème au chargement de Gamebase avec GameEx.
Télécharger GameEx v19.07
Site Officiel de GameEx
 
 clrmame v0.4 
Lundi 21/04/25 à 14:20 par Firebrand
Cette réécriture de ClrMAME Pro continue son développement. Les améliorations sont les suivantes:
UI:
- scanner, fixed showing of empty and complete machines
- scanner, fixed showing of non rom/sample/disk related machine/file/folder issues

Core:
- added: read/write support for zstandard compressed zip files
*rebuilder, two zstd compression methods added, newly created/added files will use it (existing destination files which don't get replaced won't be updated). Source files which don't use the set compression method won't be taken into account when checking for a direct archive copy
*scanner, automatically detects if you prefer zstd or deflate compressed zips and uses the preferred setting the case that new files are added.
*with both, rebuilder/scanner you can theoretically end up with zip files which have files in it with different compression methods. Rebuilder: if you rebuild to existing files, scanner, if you already have a mixture of archives using different compression methods.
- added: scanner, reporting 'wrong' chd version. Current expected version is 5, warning is not shown for baddumps. Version and baddump warning can be altered in settings.xml
- misc: changed the behaviour of devices which have romOf dependencies. When fully merging such devices they are now handled like parent/clone machines. On the one hand it makes sense since there are merge attributes indicating that such sets belong together but there are also cases where they are distinct. This is now aligned with clrmamepro, but still something which might need further discussion
- misc: updated cli11 to 2.5.0
- misc: updated spdlog to 1.15.2
- misc: updated bit7z to 4.0.10
- misc: scanner, using absolute pathnames for error reporting in path scan
- misc: scanner, only trace-log machines with issues in fixing phase
- fixed: scanner, typo "uneeded"
- fixed: scanner: detection of empty but unneeded folders in archives
- fixed: scanner, backup of chds in software list collections can fail
- fixed: scanner, archives which match a valid rompath subfolder name (e.g. softwarelist name via pattern or automatically) are falsely iterated like a folder instead of listing them as unneeded (wrong placed)
- fixed: crash on rom definitions without a crc
- fixed: filter enrichment might miss sampleof dependencies
- fixed: doing archive backups from a folder and backup archive already exists creates a new archive instead of merging files in
Télécharger clrmame v0.4
Site Officiel de clrmame
 
<< Page précédentePage suivante >>