Organiser
Filtrer par machine :
Type de vue :
 
 AppleWin v1.29.7.0 
Samedi 21/12/19 à 14:21 par Firebrand
Cet émulateur Apple // a été mis à jour. Les améliorations sont les suivantes:
- [Change #726] Disk II card: supported in slot 5 via '-s5 diskii' command line.
*use in conjunction with -s5d1 .
*NB. No support via Configuration GUI for insert/ejecting images.
- [Change #737] Debugger: Changed 'cycles' to show the cycle delta since the step/breakpoint etc.
*NB. Since 1.29.3.0 this has been the absolute cumulative cycle count.
-[Bug #740] Debugger: gr/hgr/dgr/dhgr commands will honour the state of the MIXED mode.
-[Bug #733] Fixed WOZ 'Wasteland' and also NIB 'Wasteland'.
-[Bug #451] Debugger: fix for BPM[R|W] triggering on control-flow instructions' target address.
-[Bug #355] For first-time installs of AppleWin, soundtype now defaults to WAVE (was NONE).
-[PR #730] Speed-up for 'Color (RGB Monitor)' video mode.
Télécharger AppleWin v1.29.7.0
Site Officiel de AppleWin
 
 WinUAE v4.3.0 Beta 10 
Mercredi 18/12/19 à 12:57 par Firebrand
La prochaine version stable se précise, mais il faut visiblement encore un peu de travail. Voici les nouveautés du jour:
- Emulation window status bar DPI calculation fixed.
- Default GUI size (when opened without existing registry/ini data or version in reg/ini is old) didn't include DPI correction.
- Added -resetgui command line parameter that resets GUI customizations stored in registry/ini.

Some high DPI nice to have things that I forgot. If you have high DPI display (and even if you don't), could you test following:
- Click misc panel GUI default button. GUI size should have correct default size, for example no too large fonts in small buttons etc..
- Run winuae with -resetgui command line parameter. GUI should have same size as in previous test (but position can be different because it also resets)
Télécharger WinUAE v4.3.0 Beta 10 (32-bit)
Télécharger WinUAE v4.3.0 Beta 10 (64-bit)
Site Officiel de WinUAE
 
 bsnes v113.1 
Mercredi 18/12/19 à 12:54 par Firebrand
Un problème sur les save stats a été corrigé pour cet excellent émulateur Super Nintendo. Voici les détails:
- I've posted a quick hotfix release for an issue that was causing save states to sometimes fail to restore the state correctly.
- I haven't yet identified why the small change I made in the v112 WIPs caused this issue, but reverting it has of course corrected the issue, so for now, I'm posting v113.1.
Télécharger bsnes v113.1 (Windows)
Télécharger bsnes v113.1 (MacOS)
Télécharger bsnes v113.1 (Linux)
Site Officiel de bsnes
 
 MAMu_'s MAME Icons v0.216 Extended Pack 
Lundi 16/12/19 à 13:48 par Firebrand
De nouvelles icônes ont été ajoutées à ce pack pour compléter la collection jusqu'à MAME v0.216.
Télécharger MAMu_'s MAME Icons v0.216 Extended Pack
Site Officiel de MAMu_'s MAME Icons
 
 ClrMAME Pro v4.036a 
Dimanche 15/12/19 à 15:59 par Firebrand
Une correctif a été apporté à la dernière version ClrMAME Pro. Voici de quoi il s'agit:
- fixed: broken rar support in 64bit version (64bit conflict of rar and sha1 class), updated rar dll to 5.8 (4.036a)
Télécharger ClrMAME Pro v4.036a (32-bit)
Télécharger ClrMAME Pro v4.036a (64-bit)
Site Officiel de ClrMAME Pro
 
 WinUAE v4.3.0 Beta 9 FR 
Dimanche 15/12/19 à 15:57 par Firebrand
La dernière version de WinUAE a été traduite en français pas l'équipe de Tradu-France
Télécharger WinUAE v4.3.0 Beta 9 FR (32-bit)
Télécharger WinUAE v4.3.0 Beta 7 FR (64-bit)
Tradu-France
 
 WinUAE v4.3.0 Beta 9 
Dimanche 15/12/19 à 15:55 par Firebrand
Une nouvelle beta de WinUAE a été publiée. Voici la liste des nouveautés:
- Executed full 68000 and 68020 CPU tester recheck (Including trace and address errors).
- 68020 T0 set and RTE causing format error exception: trace exception is not generated.
- Yet another update to "Alien Breed 3D glitch that depends on screen size". Hopefully this is now fully working.
Télécharger WinUAE v4.3.0 Beta 9 (32-bit)
Télécharger WinUAE v4.3.0 Beta 9 (64-bit)
Site Officiel de WinUAE
 
 Flopée de mises à jour pour Richard Bannister 
Dimanche 15/12/19 à 15:53 par Firebrand
Richard Bannister a mis à jour l'ensemble des ports MacOS d'émulateur qu'il maintient ainsi qu'Emulator Enhancer. Il apporte le support de MacOS Catalina et améliore celui de MacOS Mojave. Voici les autres améliorations:
The main changes in this release are as follows:
- Added new Metal video renderer. The old OpenGL code has been removed.
- Fixed a number of visual glitches in the Preferences window on newer systems.
- Fixed a number of issues with video display on newer systems.
- Added support for Dark Mode on newer systems.
- Added code to stop the display going to sleep when an emulator is running.
- (EE only) Fixed a typo that made the Xbox 360 Controller family unusable with Emulator Enhancer. This will likely resolve issues with other analog controllers too.
- (EE only) Added support for multi-device HID adapters (such as Mayflash Retro Controller Adapters).
- (EE only) Fixed an issue where establishing a network connection sometimes failed for no reason.
- (EE only) Resolved an issue where Quick Freeze (etc) could only ever be used once from a USB controller.
- (EE only) Switched payment processing system from eSellerate to Paddle. Please note that existing EE3 serial numbers will not work in this release. To upgrade, go through the purchase process as normal but enter your valid EE3 serial number in the coupon code field; this will allow you to complete the registration process at no cost.

There are also a few minor changes to individual emulators, as follows:
- (fMSX) Updated to core version 5.4.
- (Handy) Added a button to rotate the display.
- (Handy) Fixed an error in the display of the lynxboot.img path.
- (Horizon) Added a display of the file path to I/O error messages.
- (Neopocott) Added an option to force Black & White mode.
- (O2Em) Fixed a keyboard mapping bug that made the letter 'A' unusable.
- (TEO, Thom) Added missing "CNT" key mapping.
Télécharger Boycott Advance v0.4.2 (MacOS)
Télécharger fMSX v5.4.0 (MacOS)
Télécharger Frodo v4.4.2 (MacOS)
Télécharger Generator v0.4.6 (MacOS)
Télécharger Genesis Plus v1.3.3 (MacOS)
Télécharger Handy v0.9.9 (MacOS)
Télécharger Jum52 v1.1.2 (MacOS)
Télécharger KiGB v2.0.7 (MacOS)
Télécharger MO5 v2.6.5 (MacOS)
Télécharger Mugrat v0.4.6 (MacOS)
Télécharger NeoPocott v0.5.3 (MacOS)
Télécharger Nestopia v1.4.3 (MacOS)
Télécharger O2EM v1.1.9 (MacOS)
Télécharger Oric v1.8.1 (MacOS)
Télécharger Oswan v0.8.4 (MacOS)
Télécharger SMS Plus v1.3.5 (MacOS)
Télécharger TGEmu v0.3.6 (MacOS)
Télécharger THOM v1.6.3 (MacOS)
Télécharger ViBE v1.0.1 (MacOS)
Site Officiel de Richard Bannister
 
 pfeMAME v2.11.4 
Samedi 14/12/19 à 14:42 par Firebrand
Ce frontend mis à jour régulièrement et qui vient de rejoindre notre section utilitaires pour MAME vient d'avoir une nouvelle version. Voici la liste des nouveautés:
- This is a pretty big release with lots of bug fixes, a few minor new features, heaps of background code improvements, and a work-around for an issue with systems emulation under MAME (see below). Check out the changelog file for full details.
- MAME Systems support – I don’t know if this is a bug or intended operation (odd if it is), but for systems that have expansion modules that when connected add an additional media type there is a problem. Even if you add the correct slot devices into the systems INI file (the slot devices that add the external hard drive, cartridge slot etc), when you run the MAME command with the new media type (e.g. flop1), MAME won’t see it and reports that it’s an unknown media type. It doesn’t seem to be parsing the slot devices before checking valid media types when MAME is invoked. Again, seems like odd behaviour if it’s by design. To get around it, I read the slot devices from the INI file and add them to the command line when calling MAME. Seems to work well and fixed issues with ZX Spectrum slot devices.
- The Windows build is using python 3.8 while the Ubuntu build is using python 3.7. Basically, my Ubuntu VM only has a 3.7 release at this stage. You shouldn’t notice any difference at this point in time until I start looking at exploiting the new shared memory feature for multi-tasking under 3.8.
Télécharger pfeMAME v2.11.4 (Windows)
Télécharger pfeMAME v2.11.4 (Linux)
Site Officiel de pfeMAME
 
 GameEx et GameEx Arcade Edition v16.10 
Samedi 14/12/19 à 14:30 par Firebrand
De nouvelles versions de ces frontnds multi-systèmes ont été publiés, mais aucune information sur les changements n'a été donnée.
Télécharger GameEx v16.10
Télécharger GameEx Arcade Edition v16.10
Site Officiel de GameEx
 
 Mame Classic v9.3.0 
Samedi 14/12/19 à 13:43 par Firebrand
Ce frontend pour MAME a été mis à jour. Les améliorations sont les suivantes:
- Added : Control for Low Latency.
- Added : You can now open MAME Classic's App folder and Data folder from the Tools menu.
- Changed : MAME Classic no longer converts paths to their short path name.
- Changed : MAME Classic now uses your LOCALAPPDATA folder to write output, reports and temp files. Any files in the old location (MAME Classic folder) will be moved to the new location the first time you run this version. Once they are moved, you can delete the output, settings and temp folders in the MAME Classic folder. This will allow MAME Classic to be run without admin rights "if" your MAME folders are in unprotected locations.
- Changed : The ROM Directories function is now called Orphan ROM Finder.
- Changed : The Settings screen will now default to the image type of the current select machine.
- Fixed : The Audit function would report "Samples are not needed with this driver." if the sample set was missing regardless if samples were needed or not.
- Fixed : The ROM Directories function would exit prematurely if an orphan ROM was found and you chose to move it.
- Removed : Depreciated Artwork options.
Télécharger Mame Classic v9.3.0
Site Officiel de Mame Classic
 
 RomVault v3.0.44 
Vendredi 13/12/19 à 12:16 par Firebrand
Une nouvelle version de ce gestionnaire de ROMs a été publiée. Voici les nouveautés:
- if you are using Directory mapping you should switch to this version, as there was a bug in previous version that could screw these up.
Télécharger RomVault v3.0.44
Site Officiel de RomVault
 
 bsnes v113 
Vendredi 13/12/19 à 12:15 par Firebrand
Cet excellent émulateur Super Nintendo a été mis à jour. Les améliorations sont les suivantes:
- corrected PPU OAM address latching with the accurate PPU renderer
- fixed offset-per-tile regression with the accurate PPU renderer
- fixed very rare PPU mosaic rendering bug with the accurate PPU renderer
- corrected a sound stuttering issue when emulating the Super Game Boy 2 [LIJI]
- Windows: added a workaround for an issue where bsnes was crashing on exit for a very small number of users
- changed gamepak firmware loading names to use the identifier (dsp1, dsp2, etc) label instead of the architecture (upd7725, etc)
- do not apply color blending for the first hires pixel with the accurate PPU renderer (fixes green line in Jurassic Park)
- added scanline override setting for Suguro Quest++ with the fast PPU renderer
- disabled HD mode 7 supersampling when EXTBG mode is active, as it is not compatible
- fixed MSU1 and SGB audio when using run-ahead and overclocking modes
- implemented correct fix for Kishin Douji Zenki - Tenchi Meidou
- improved CPU IRQ handling to fix Shin Nihon Pro Wrestling Kouhin '95
- fixed a GUI typo where "Increment" and "Decrement" "State Slot" labels were reversed
- fixed audio balance setting when lowering it below 50%
- added BSC-1A7M-10 board and corrected BSC-1AxM-xx masking (fixes RPG Tsukuru 2 and Sound Novel Tsukuru)
- improved the driver crash detector to not trip if closing the emulator before initialization could complete
- added a hotfix to prevent a rare crash in Rendering Ranger R2 that can happen even on real hardware
- made the entire window support drag-and-drop for gamepaks and game ROM files
- merged the latest release of SameBoy for improved Super Game Boy support [LIJI]
- macOS: add hotplug support to IOKit joypad driver [Sintendo]
- macOS: fixed a serious issue with the IOKit joypad driver [kode54]
- libretro: updated boards database to the latest version [rtretiakov]
- libretro: merged Super Game Boy support improvement patch [fr500]
- small improvements to libco and nall libraries
Télécharger bsnes v113 (Windows)
Télécharger bsnes v113 (MacOS)
Télécharger bsnes v113 (Linux)
Site Officiel de bsnes
 
 ClrMAME Pro v4.036 
Jeudi 12/12/19 à 13:53 par Firebrand
Ce gestionnaire de ROMs de référence n'avait pas été mis à jour depuis plus d'un an. C'est voici chose faite et les améliorations sont les suivantes:
- added: automatic 32k path length support, no more need to use \\?\ prefixes (*)
- fixed: miss-list listed some sample-only-sets where the parent is autogenerated (e.g. fantasy_sound, nes_jf13, etc)
- fixed: wrong software list rom size for roms which imply an offset of 0x00000000 as default
- fixed: remembering window positions on multiple / virtual screens fails
- fixed: rebuilder match count for files with identical crc32 but different sha1
- fixed: rebuilder removal of rebuilt files for files with identical crc32 but different sha1
- fixed: detect chd clone to clone moves (aka MAME 206 vs4e to vs4eo rename)
- fixed: rom count for fully missing sets included bios roms even when the bios set is available
- fixed: select sets options like initial invert / incl. clones/devices etc should only be activate when select sets or from file is specified
- misc: rebuilder log adds software list information to file name
- misc: dir2dat writes chd files as disk
- misc: added cmpro.ini option Adv_WindowToFront = on (on / off) to handle the automatic bring window to front functionality
- misc: profiler cache which reduces rescanning datfiles/settings on each profiler visit, should speed up profiler for users which have lots and lots of dats. Delete/Add/Move operations will force a refresh at the moment though
- misc: limit extension removal to a max of 3 characters and no space after the .
- misc: updated zip, rar and 7z dlls (4.6.7, 5.71, 1900)
- misc: updated sha1 c++ class implementation to 2.1
- misc: switched to Visual Studio 2019
Télécharger ClrMAME Pro v4.036 (32-bit)
Télécharger ClrMAME Pro v4.036 (64-bit)
Site Officiel de ClrMAME Pro
 
 WinUAE v4.3.0 Beta 8 
Mardi 10/12/19 à 12:18 par Firebrand
Cet émulateur Amiga qu'on ne présente plus a été mis à jour. La prochaine version stable devrait être publiée la semaine prochaine si tout va bien. En attendant, voici les changements:
- Partition HDF default geometry calculation changed if partition size is 1000M or larger, keeps total cylinders under 32768 = better compatibility with pre-OS3.9(BB2?) versions. Only changed when HDF is added using GUI. Config file loaded geometry won't change.
- RDB mode didn't disable if RDB HDF was selected and then switched to partition HDF using GUI.
- CD32 didn't boot from CD after reset (b1)
- DMA debugger update in b7 had incorrect commmand parsing.
- Microbotics HardFrame v1.9 ROM CRCs added.
- D3D11 HDR mode is not anymore enabled automatically (if compatible hardware is detected), it is now only enabled if gfx_hdr=true is in config file. This is experimental feature and should not be the default in official versions.
- RTG mode D3D9/11 overlay graphics support. (Scaling/positioning needs to be better but it needs more updates, after 4.3.0 is out)
Télécharger WinUAE v4.3.0 Beta 8 (32-bit)
Télécharger WinUAE v4.3.0 Beta 8 (64-bit)
Site Officiel de WinUAE
 
 SDLMAME4Ubuntu v0.216 
Mardi 10/12/19 à 12:15 par Firebrand
Cette version de MAME pour Linux a été mis à jour avec les sources de MAME v0.216.
Télécharger SDLMAME4Ubuntu v0.216 (32-bit)
Télécharger SDLMAME4Ubuntu v0.216 (64-bit)
Site Officiel de SDLMAME4Ubuntu
 
 History.dat v2.16a 
Lundi 09/12/19 à 18:43 par Firebrand
Une nouvelle version de ce fichier informatif pour MAME a été publiée. Les modifications ne sont pas connues.
Télécharger History.dat v2.16a
Site Officiel de History.dat
 
 GameEx et GameEx Arcade Edition v16.09 
Lundi 09/12/19 à 18:40 par Firebrand
Ces 2 frontends ont été mis à jour. Et miracle, on sait ce qui change cette fois:
- Default theme images have been upscaled and quality has improved.
Télécharger GameEx v16.09
Télécharger GameEx Arcade Edition v16.09
Site Officiel de GameEx
 
 Emu Loader v8.8.3 (version complète) 
Lundi 09/12/19 à 18:37 par Firebrand
Ce forntend multi-systèmes a été mis à jour. Voici la liste des améliorations:
Last build of the year, more bug fixes and some minor tweaks.
Added night mode colors for MAMu_ Icons Manager. Updated MAME Settings screen to support MAME v0.216.

Fixed
- Wrong "Panels Colors" settings at startup, "Title Font/Shadow", "Title 2 Font/Shadow", "Text Font/Shadow" ("Night Mode" page, Preferences screen)
- Wrong "Search Games Panel Colors" settings at startup, "Filter Font/Shadow" ("Night Mode" page, Preferences screen)

Changed
- Modified the scope of "Ignore Exit Code 1: Invalid Function" setting to support all console/computer emulators
*"KEGA Fusion" is no longer the only emulator returning exit code of "one" on exit
*this error might be related to a missing and/or incompatible plugin or badly configured emulator
*even when nothing is wrong, the emulator might give you "code 1" as an exit code :(
NOTE: this exit code is caused by the emulators, not the frontend
- Updates to "Cleanse" feature in "Favorites Manager" screen
*a list of all entries to be removed from the favorite profile is shown for review
*you can remove entries from that list so they are not deleted from the profile .ini
*there's no way to show titles, only game names and/or filenames and the system they belong to

Added
- Requested setting "Add Leading Zero to Version Info Column (MAME)" so you can have "0.200" text in the version info column instead of ".200"
- Multiple paths support for MAME preview images
*MAME and HBMAME only
*all image categories are supported: snaps, titles, covers, flyers, etc...
*you can have define as many image directories you want
*MAME softlist .zip files don't have to be in the same place as the arcade .zip files anymore, you can have "snap.zip" in one folder and "snap_sl.zip" in another
- Support for MAME .201
*vgmplay software list is now correctly detected and sets are correctly loaded by the frontend
*new filter to hide vgmplay softlist entries from the games list: "Hide Video Game Music Files" ("Arcade Misc Filter" tool bar button)
Télécharger Emu Loader v8.8.3 (version complète)
Site Officiel de Emu Loader
 
 WinUAE v4.3.0 Beta 7 FR 
Lundi 09/12/19 à 18:32 par Firebrand
La dernière version de WinUAE est déjà disponible en français grâce à Tradu-France.
Télécharger WinUAE v4.3.0 Beta 7 FR (32-bit)
Télécharger WinUAE v4.3.0 Beta 7 FR (64-bit)
Tradu-France
 
 WinUAE v4.3.0 Beta 7 
Lundi 09/12/19 à 18:30 par Firebrand
Une nouvelle beta de cet émulateur Amiga a été publiée. Deux modifications sont à signaler:
- Output DMA debugger output to log file with "vl" command.
- Fixed b6 horizontal bitplane buffer size check. (for example superhires wasn't fully visible)
Télécharger WinUAE v4.3.0 Beta 7 (32-bit)
Télécharger WinUAE v4.3.0 Beta 7 (64-bit)
Site Officiel de WinUAE
 
<< Page précédentePage suivante >>
2001-2020 Planet Emulation