Organiser
Filtrer par machine :
Type de vue :
 
 WinUAE v4.4.0 Beta 3 FR 
Lundi 18/05/20 à 14:10 par Firebrand
La dernière beta de WinUAE est déjà disponible en français grâce à Tradu-France.
Télécharger WinUAE v4.4.0 Beta 3 FR (32-bit)
Télécharger WinUAE v4.4.0 Beta 3 FR (64-bit)
Tradu-France
 
 WinUAE v4.4.0 Beta 3 
Lundi 18/05/20 à 14:08 par Firebrand
Une nouvelle beta de cet émulatuer Amiga qu'on ne présente plus a été publiée. Les améliorations sont les suivantes:
Not much updates because 68000 bus/address error stack frame bug wasn't that simple to fix.
- b1 disk read dma without drives update didn't handle situation where disk write was started without any selected drives.
- 68000 bus/address error stack frame program counter field was almost always incorrect (b1). One modification was lost when gencpu was cleaned up and my CPU tester had a bug and ignored this field.. Address errors and bus errors fixed (read, write and prefetch). Amiga does not use bus errors and only some protections use address errors. You probably would expect bus/address error stacked PC point to address that was being prefetched but usually it has +2/-2 offset. It can get even more interesting if it is jump or branch instruction.
- When ejecting directory filesystem that points to plain file or archive, not all host file handles were closed properly.

CPU tester FPU trigonometric and logarithmic instructions verified. Last 16 or so bits of extended double was ignored in most tests because 6888x returns slightly different results than 68040+ FPSP and also some 6888x instructions return less precise result than FPSP does. All 6888x trigonometic and logarithmic instructions seem to work correctly enough in softfloat mode.
- FSINH and FCOSH didn't set INEX bit if result was infinity.
- FREM and FMOD didn't round using current rounding mode.
- FREM and FMOD will only return correct results with some input parameter values. FREM and FMOD is based on some other CPU behavior, most likely x87, and it isn't fully compatible with Motorola implementation. For some reason this was not updated. Will be fixed later.
- FSCALE didn't round the final result correctlyin all code paths.

Most likely no real world program was affected. Host FPU mode will also return even more different results.
Télécharger WinUAE v4.4.0 Beta 3 (32-bit)
Télécharger WinUAE v4.4.0 Beta 3 (64-bit)
Site Officiel de WinUAE
 
 WolfMAME v0.221 
Lundi 18/05/20 à 14:05 par Firebrand
Alors que la version officielle de MAME n'est toujours pas mise à jour, ce build spécialisé dans les compétitions de high scores utilise les sources en cours pour s'offrir une nouvelle version.
Télécharger WolfMAME v0.221
Site Officiel de WolfMAME
 
 RetroArch v1.8.7 
Lundi 18/05/20 à 14:03 par Firebrand
Une nouvelle version de cet ensemble de noyaux d'émulateurs réunis au sein d'une même interface a été publiée. Comme toujours, un article bien illustré est présent sur le site officiel et je vous conseille de le consulter si vous voulez tous les détails. En attendant, voici les changements généraux:
- 3DS: Add IDs for Frodo
- 3DS: Enable basic networking / cheevos
- CHEEVOS/BUGFIX: Opening achievements list would crash RetroArch with badges enabled (on new games)
- CHEEVOS: Option to start a session with all achievements active
- CHEEVOS: Don’t perform unnecessary cheevos initialisation when cheevos are disabled. Should reduce startup times when loading content.
- CORE OPTIONS: Disable ‘Use Global Core Options File’ by default
- DOS/DJGPP: Add 32bit color support for cores
- GLCORE: Switch to glcore video driver when requested by a core
- LINUX/XDG: Use GenericName correctly in desktop entry
- MAC/COCOA: Fix mouse cursor tracking
- MENU/MATERIALUI: Add desktop-style playlist view mode
- MENU/MATERIALUI/DESKTOPVIEW: When scrolling playlists, show last selected thumbnails while waiting for next entry to load
- MENU/MATERIALUI: Limit tab switch rate when input repeat is active
- MENU/OZONE: Fix sidebar playlist sort order when ‘Truncate Playlist Names’ is enabled
- MENU/RGUI: Adjusted menu defaults, adjusted default scrolling speed
- MENU/RGUI: Enable custom wallpaper when menu size is reduced at low resolutions
- MENU/XMB: Limit tab switch rate when input repeat is active
- NETPLAY: Fix regressions introduced in 1.8.5
- RGUI: Add option to always stretch menu to fill the screen
- WIIU: Enable graphics widgets
Télécharger RetroArch v1.8.7 (32-bit) (Windows)
Télécharger RetroArch v1.8.7 (64-bit) (Windows)
Télécharger RetroArch v1.8.7 (Windows XP/Vista 32-bit (Windows)
Télécharger RetroArch v1.8.7 (Windows XP/Vista 64-bit (Windows)
Télécharger RetroArch v1.8.7 (64-bit) (MacOS)
Télécharger RetroArch v1.8.7 (Metal2) (MacOS)
Télécharger RetroArch v1.8.7 (Nintendo GC)
Télécharger RetroArch v1.8.7 (Nintendo Wii)
Télécharger RetroArch v1.8.7 (RPX) (Nintendo WiiU)
Télécharger RetroArch v1.8.7 (.3dsx) (Nintendo 3DS)
Télécharger RetroArch v1.8.7 (.cia) (Nintendo 3DS)
Télécharger RetroArch v1.8.7 (Nintendo Switch)
Télécharger RetroArch v1.8.7 (PlayStation 2)
Télécharger RetroArch v1.8.7 (PSL1GHT) (PlayStation 3)
Télécharger RetroArch v1.8.7 (PSP)
Télécharger RetroArch v1.8.7 (PS Vita)
Télécharger RetroArch v1.8.7 (Xbox One)
Site Officiel de RetroArch
 
 Hoxs64 v1.1.0.2 FR 
Dimanche 17/05/20 à 14:17 par Firebrand
La dernière version de ce émulateur Commodore 64 est disponible en français grâce à Tradu-France.
Télécharger Hoxs64 v1.1.0.2 (32-bit) FR
Télécharger Hoxs64 v1.1.0.2 (64-bit) FR
Tradu-France
 
 m64p 15/05/2020 
Samedi 16/05/20 à 15:22 par Firebrand
Le jeu en ligne de cet émulateur Nintendo 64 a été amélioré (mais ça reste encore expérimental):
- This new beta adds settings sync between players. It also has a warning in the logs if players desync, as well as some optimizations to the TCP code and a few minor bug fixes.
Télécharger m64p 15/05/2020 (Windows)
Télécharger m64p 15/05/2020 (Linux)
Site Officiel de m64p
 
 Hoxs64 v1.1.0.2 
Samedi 16/05/20 à 15:18 par Firebrand
Voici une nouvelle mise à jour de cet émulateur Commodore 64 qui fonctionne désormais sous Windows 7:
1) Fix null pointer access start up crash on Windows 7.
2) Automatically position the ImgUI popup when out of bounds.
3) Automatic mini-dump file creation with the application folder for application crashes.
Télécharger Hoxs64 v1.1.0.2 (32-bit)
Télécharger Hoxs64 v1.1.0.2 (64-bit)
Site Officiel de Hoxs64
 
 GameEx et GameEx Arcade Edition v16.43 
Vendredi 15/05/20 à 14:59 par Firebrand
Une nouvelle version de ces frontends a été publiée mais toujours aucune information sur les changements apportés.
Télécharger GameEx v16.43
Télécharger GameEx Arcade Edition v16.43
Site Officiel de GameEx
 
 pNES, pSNES, pFBN v4.4 
Vendredi 15/05/20 à 14:36 par Firebrand
Ces émulateurs NES, SNES et arcade pour Nintendo Switch, PlayStation Vita et Linux ont été mis à jour. Les améliorations sont les suivantes:
- pnes: update for latest pemu changes
- pfbn: add nes console support
- pfbn: update fbneo core to commit 89f2b6d
- all: add "big_preview" skin
- all: romlist: fix lower/upper cases sorting
- all: romlist: don't filter on file extension, show any files in roms folder
- all: load previews from default folders even if the game do not exist in database ("media/mixrbv2/.png", "media/video/.mp4")
- all: add "no preview" image when no preview found
- all: add a few effects to preview images/videos
- all: further improvements to overall system stability and other minor adjustments have been made to enhance the user experience
Télécharger pNES v4.4 (Nintendo Switch)
Télécharger pNES v4.4 (Linux)
Télécharger pSNES v4.4 (Nintendo Switch)
Télécharger pSNES v4.4 (PS Vita)
Télécharger pSNES v4.4 (Linux)
Télécharger pFBN v4.4 (Nintendo Switch)
Télécharger pFBN v4.4 (PS Vita)
Télécharger pFBN v4.4 (Linux)
Site Officiel de pNES
 
 m64p 14/05/2020 
Vendredi 15/05/20 à 14:24 par Firebrand
Cet ensemble comportant l'émulateur mupen64plus, un frontend et un plug-in graphique supporte désormais le jeu en ligne mais de façon préliminaire. Voici les informations à ce sujet:
- This is the first release to include (very preliminary) netplay support. You can watch a short demo of this feature here: https://www.youtube.com/watch?v=XKehKifbK8U
- Please submit issues related to netplay here: #35
- Currently, there is a single server, hosted in AWS (US West region). I have started a Patreon here: https://www.patreon.com/m64p please consider donating. A netplay server costs about $10-15 a month to operate. Donations will allow me to create more netplay servers in other regions.
- This release does not synchronize game settings between players. If you are using netplay, you should have all default settings in Advanced Settings and Video settings or the game may desync between players.
Télécharger m64p 14/05/2020 (Windows)
Télécharger m64p 14/05/2020 (Linux)
Site Officiel de m64p
 
 Raine v0.91.4 
Jeudi 14/05/20 à 14:02 par Firebrand
Cette nouvelle version de Raine corrige le support d'EmuDX qui plantait dans la précédente version:
... and uploaded 0.91.4, aka the return of emudx !
the bug fixes are generic but it's really mainly for emudx, not sure they could be triggered elsewhere...
Télécharger Raine v0.91.4 (32-bit)
Télécharger Raine v0.91.4 (64-bit)
Site Officiel de Raine
 
 Hoxs64 v1.1.0.1 
Jeudi 14/05/20 à 13:57 par Firebrand
Cet émulateur Commodore 64 a été mis à jour. La grande nouveauté est d'utiliser désormais DirectX 11.1 ce qui nécessitera au minimum Windows 8 (le readme précise même Windows 10). Des composants supplémentaires sont à installer et vous les trouverez sur la fiche de l'émulateur. Pour les utilisateurs de Windows plus anciens, la v1.0.25.0 compatible avec DirectX 9 est toujours disponible sur le site officiel. Voici la liste des changements:
v1.1.0.1
1) Fix missing XInput1_4.dll error on Windows 7.

v1.1.0.0
1) New DirectX 11.1 graphics implementation to replace the old DirectX 9 implementation. Requires Microsoft Visual C++ 2019 runtime installation.
2) Fix CPU DMA timing bug with SHA SHX SHY.
3) CIA shift register timing fixes to accommodate Vice testprogs:
- cia-sdr-icr-new.prg
- cia-sdr-icr-old.prg
- cia-sdr-load.prg
4) New ImgGui based file selector for full screen mode with option to opt out of windowed mode use.
Télécharger Hoxs64 v1.1.0.1 (32-bit)
Télécharger Hoxs64 v1.1.0.1 (64-bit)
Site Officiel de Hoxs64
 
 Nintendulator FR v0.985 Beta (09/05/20) 
Lundi 11/05/20 à 14:09 par Firebrand
La dernière beta de cet émulateur NES a été traduite en français par l'équipe de Tradu-France.
Télécharger Nintendulator FR v0.985 Beta (32-bit) (09/05/20)
Télécharger Nintendulator FR v0.985 Beta (64-bit) (09/05/20)
Site Officiel de Nintendulator FR
 
 Raine v0.91.3 
Lundi 11/05/20 à 14:06 par Firebrand
Une nouvelle version de cet émulateur multi-systèmes a été publiée. Voici la liste des nouveautés:
Ok, I'll start by what took me the biggest amount of time, even if it's very specific, the unicode filenames in windows !
So to see the problem you need some non-standard characters in a folder or filename, it's easier if it's on a folder containing some neocd game. I visited the wikipedia page about "the king of fighters", and got the japanese name of the game from there : (ザ・キング・オブ・ファイターズ 京). So just copy and paste this at the end of the name of such a directory. Then run any previous version of raine : the directory will be impossible to find ! It might be possible to do that with just 1 character, and less exotic, but I am not sure about this, and I am sure about the japanese name !
The reason is because microsoft has some inherently broken api to access its files, if the filename contains some non-standard character for the current code page of the system (which can't be utf8 of course !), then the usual functions to access files return a filename which is absolutely unusable. So the old versions find nothing when trying to access the dir, and forget about it. I am not going to tell the whole technical solution I found, if you want to see that, go to the git page. But shortly, the file selector now uses windows native functions to get the file listing, but since it still needs a standard file name for the file operations, it uses the short filename when available, using the usual long one just for display in the file selector. This means the workaround will work only if your volume has some short filenames, but normally it's the default for any volume created in windows - I created one in linux and used it in windows, in this case it didn't have any short file name, and it took me quite a while to find out how to reactivate them for this volume !
Anyway, after this you should see something for the directory if using this version. If you really want to see the Japanese characters in the gui, you'll have to replace the Vera.ttf in raine's font directory by some font containing these characters. All the biggest fonts in your windows fonts directory should work, assuming it's not too old. msyh.ttc for example, just copy this one to fonts/Vera.ttf in raine's directory and you are done (I prefer the look of Vera, but it has no japanese chars !). (difficult to copy that using the explorer because it doesn't show filenames from the fonts directory ! Oh well, you can always use the very outdated cmd.exe for that, dir /Os to have the biggest files, then make your choice and copy !).

Except this big annoyance, the other changes :
- fixed again some cheats, this 0.91 version is mainly about that after all, there were some bugs for kof98 particularly, I found quite a few which obliged me to redo the conversion for most of them.
- added some new command line switches : -nb, -wb, -rp, see raine -h for details.
- Fixed the display when starting raine without any gui in opengl (-n switch).

So that's quite a big one, once again... I hope I won't have to deal again with these unicode characters at least, I couldn't leave it like that with some files impossible to access, but it's a mess I prefer to avoid otherwise !
Télécharger Raine v0.91.3 (32-bit)
Télécharger Raine v0.91.3 (64-bit)
Site Officiel de Raine
 
 m64p 10/05/2020 
Lundi 11/05/20 à 14:02 par Firebrand
Cet ensemble réunissant l'émulateur mupen64plus, un frontend et un plug-in graphique a été mis à jour. Les améliorations sont les suivantes:
- Various fixes to GLideN64
Télécharger m64p 10/05/2020 (Windows)
Télécharger m64p v10/05/2020 (Linux)
Site Officiel de m64p
 
 Nintendulator v0.985 Beta (09/05/20) 
Dimanche 10/05/20 à 14:09 par Firebrand
Beaucoup de nouvelles versions pour cet émulateur dernièrement. En voici encore une. Les améliorations sont les suivantes:
- I've made some sweeping changes to all of the Mapper DLLs so that they can more intelligently manage multiple versions of their savestate data. This required updating the mapper interface version number, so any 3rd-party mapper modules will need to be updated.
Télécharger Nintendulator v0.985 Beta (32-bit) (09/05/20)
Télécharger Nintendulator v0.985 Beta (64-bit) (09/05/20)
Site Officiel de Nintendulator
 
 ClrMAME Pro v4.037 
Samedi 09/05/20 à 14:09 par Firebrand
Ce gestionnaire de ROMs a été mis à jour. Voici la liste des nouveautés:
- fixed: do not detect wrong sysdefpath issues when rom (or chd) is in the correct path while the chd (or rom) is in the wrong
- fixed: failed detects of wrong named chds in chd-only sets (annoying 'move to backup, readded via fixmissing') (needed for upcoming saturn.xml updates)
- fixed: datfile version gets cleaned out in profiler when creating or updating a datfile/profile
- fixed: Mac Wine/Wineskin-Winery crash due to AfxBeginThread calls
- fixed: Linux Wine crash when using dats with regions
- misc: allow profiles without any sets
- misc: allow special chars in datfile descriptions (e.g. ':', '\', '/' etc)
- misc: updated rar dlls (5.80)
- added: cmpro.ini option Packer_Zip_CompressionLevel to set the zip compression level (default is 9)
- added: dir2dat option to keep chds as roms (and not as disks)
Télécharger ClrMAME Pro v4.037 (32-bit)
Télécharger ClrMAME Pro v4.037 (64-bit)
Site Officiel de ClrMAME Pro
 
 Nintendulator v0.985 Beta (08/05/20) 
Samedi 09/05/20 à 14:07 par Firebrand
Une nouvelle beta e cet émulateur NES a été publiée. Une note de publication a été donnée après la release de la précédente version, mais il n'est pas clair s'il s'agit d'un élément de la version du 05 mai ou de l'actuelle. La voici néanmoins:
- A rather curious bug in the EEPROM logic for mappers 16 and 159 was pointed out to me which resulted in save data being corrupted. This should hopefully no longer happen.
Télécharger Nintendulator v0.985 Beta (32-bit) (08/05/20)
Télécharger Nintendulator v0.985 Beta (64-bit) (08/05/20)
Site Officiel de Nintendulator
 
 CaPriCe Forever v20.5 
Samedi 09/05/20 à 14:04 par Firebrand
Cet émulateur Amstrad CPC a été mis à jour et une version 64-bit fait son apparition. Les améliorations sont les suivantes:
- Adaptation for Win64 platform;
- Improve Memory Editor;
- Change lightguns and AMX mouse shortcuts;
- Add direct shorcut for custom speed turbo;
- Add access to main display size zoom factor;
- Autotyping at full speed;
- Patch Pasmo assembler to accept "OUT (C),0", "SBC N", "ADC N", "ADD N";
- Fix FDC Wrong Cylinder and Bad cylinder flags issue;
- Fix minor bugs.
Télécharger CaPriCe Forever v20.5 (32-bit)
Télécharger CaPriCe Forever v20.5 (64-bit Beta)
Site Officiel de CaPriCe Forever
 
 Nintendulator FR v0.985 Beta (05/05/20) 
Vendredi 08/05/20 à 14:01 par Firebrand
La dernière version de cet émulateur NES a été traduite en français par l'équipe de Tradu-France.
Télécharger Nintendulator FR v0.985 Beta (32-bit) (05/05/20)
Télécharger Nintendulator FR v0.985 Beta (64-bit) (05/05/20)
Tradu-France
 
 MedGui Reborn Stable v0.113 
Jeudi 07/05/20 à 14:04 par Firebrand
Ce frontend pour Mednafen a été mis à jour. Les améliorations sont les suivantes:
- On MedClient added a simple game list to start a netplay session on the fly
- Fixed scanlines trackbar value on sms
- Fixed selection of medguir menu style at first startup
- Changed and fixed popup boxart on the screen
- Autocheck internal browser under WINE
- Fixed advanced mednafen settings show form under WINE
- Fixed search game filter on combobox
- Cosmetic change on grid
Télécharger MedGui Reborn Stable v0.113
Site Officiel de MedGui Reborn Stable
 
<< Page précédentePage suivante >>