Organiser
Filtrer par machine :
Type de vue :
 
 RetroArch v1.10.0 
Lundi 24/01/22 à 17:31 par Firebrand
Cet ensemble de noyaux d'émulateurs réunis sous une même interface a été mis à jour. Le site officiel a un article détaillé sur les changements, mais voici le résumé:
- 3DS: Add Jaxe, A5200 and WASM4 cores
- 3DS: Fix rotation
- ARCHIVE: Allow loading files from archive subdirectory
- AUDIO: Remove frame limit from audio batch callback. Before, if a core used the audio batch callback, there would be a hidden cap of 1024 on the number of audio frames that could be sent. If a core exceeded this value, any excess samples were silently discarded. While this is sufficient for ‘normal’ samplerates/framerates, it means that e.g. a core using the batch callback to send 44100 Hz audio at 30 fps with would have entirely broken sound. This has been fixed by removing the audio batch frame limit.
- AUDIO/RESAMPLER/NEON: Implement sinc kaiser NEON function
- CHEEVOS: Reset hardcore default to enabled; show message when trying to load state in hardcore
- CHEEVOS: Fix memory map conversion
- CHEEVOS: Check netplay status when unlocking achievements
- CHEEVOS: Support for hashing buffered NDS ROMs
- CHEEVOS: Fix hung task whe badge doesn’t exist
- CLI: Load save states from command-line or playlist
- CORE INFO CACHE/SETTINGS: Restore missing ‘Cache Core Info Files’ menu entry
- DATABASE: Serial scanning for Gamecube/MegaCD/SegaCD/Saturn/PSX/PSP/Dreamcast/Wii
- D3D10/D3D11: Add Vsync swap interval
- EMSCRIPTEN: Add Jaxe, WASM4 cores
- FILE IO: Fix incorrect file names for remap files when the content path doesn’t have a preceding slash
- INPUT/OVERLAY: Added support for showing the overlay behind the menu instead of in front. This is currently only supported on the GL, Vulkan, D3D 9/10/11/12 and 3DS drivers.
- INPUT/UDEV: Convert abs mouse from screen to viewport coordinates; fix relative mouse coords
- INPUT/WAYLAND: Ignore mouse clicks on window decoration
- INPUT/WAYLAND: Add scroll wheel support
- LINUX: Added support for Linux GameMode (https://github.com/FeralInteractive/gamemode), which can be toggled on/off in the Power Management or Latency settings menus.
- LOCALIZATION: Fetch translations from Crowdin
- LOCALIZATION: Add Indonesian, Swedish and Ukrainian language options
- LOCALIZATION/MENU/RGUI: Enable Indonesian and Swedish localisations for RGUI
- LOGGING: Logging cleanups
- LOGGING: Stop logging FPS statistics twice on quit
- LOGGING: Log font rendering backend only once
- HOTKEYS: Added a hotkey toggle for the on-screen technical statistics.
- HOTKEYS: Add delay + acceleration to volume hotkeys
- MENU: Add option for showing notifications only in menu
- MENU/RGUI: Add Finnish to supported languages
- MENU/XMB: Optional vertical list item fade
- MENU/XMB/OZONE: Category + History/Favorites icons
- NETWORK: Fix dummy notification – no longer shows a netplay initialization failed notification when netplay is not enabled
- NETWORK: LAN addresses only for UPnP – Some router devices might accept non-LAN addresses without raising an error.
- NETWORK: Filter out non-connectable rooms. Add an option for filtering out non-connectable netplay rooms.
- NETWORK: Netplay spectator notification fix. Fix double notification when the host switches to spectator.
- NETWORK: Prevents long-term pausing from clients dishonoring allow pausing
- NETWORK/LOBBY: Lobby Viewer: Filter out rooms that are not running RetroArch
- NETWORK/LOBBY: Lobby Viewer: Display a non-connectable tag to non-connectable rooms
- NETWORK/LOBBY: Host: Display warning if we are announcing to the internet but our room isn’t connectable from there
- NETWORK/RELAY: Custom relay server support – Add support for custom user-ran relay servers
- NETWORK/RELAY: Replace Canadian relay server with Singapore relay server. Current relays: New York/USA, Madrid/Spain, Sao Paulo/Brazil, Singapore
- NETWORK/UPNP: Various refactors/improvements, no more dependent on miniupnpc
- NETWORK/UPNP: Various UPnP binding fixes for specific routers
- NETWORK/UPNP: Accept IGD v2 service types
- NETWORK/UPNP: Delay lobby server announcing – delay the announcing in order to give UPnP’s port forwarding more time. Fix the remaining truncation warnings.
- NETWORK/UPNP: Smart interface selection – Find the most suitable address for UPnP by scoring interfaces on how close their address is to the device’s address
- OPENGL1: Fix buffer overflow – RetroArch would sometimes crashes at startup when loading asset textures with GL1 driver
- PS3: PSL1GHT port added to Gitlab CI
- VULKAN: Double combined image sampler descriptor pool size – fix segfaults with AMD GPUs using RADV
- VULKAN: Emulate mailbox only with Vsync enabled – otherwise have it disabled – useful for VRR/G-Sync/FreeSync
- VULKAN/SWAPCHAIN: Vulkan max swapchain images option adjustments: removed value 1, since it won’t be used – Video reinit on change, so that there is no need to restart or toggle fullscreen
- VULKAN/HDR: HDR support – tested on Windows
- WAYLAND: Add libdecor for client side decoration
- WAYLAND: Use any display for initial metrics
- WAYLAND: Fix the window closing, if RetroArch is build without libdecor
- WAYLAND: Use checked sizes in EGL resize
- WAYLAND: Fix window title update
- WEBOS: Fix webOS build and run
- WIIU: Fix rotation
- UWP/XBOX: Fix content over 4GB (approx) failing to load, improve/speed up copy/load times
- UWP/XBOX: Fix scanning for playlists
- UWP/XBOX: Move content copied to LocalState to a dedicated dir and clear on startup
- UWP/XBOX: Make content copy to a specific cache directory in the LocalState folder when it’s copied
- UWP/XBOX: Auto delete VFS cache dir on startup
- UWP/XBOX: Make resolution switching automatic and fix angle output issues
- UWP/XBOX: Force ANGLE to render at 1080p regardless of screensize as the output is 1080p regardless of screensize. This fixes an issue where at 4k any angle output would be zoomed into a corner.
- UWP/XBOX: Set resolution based on display resolution (auto 4k)
- UWP/XBOX: Set driver to D3D11 if booting with opengl
- UWP/XBOX: Reset width and height of output on boot to match display
- UWP/XBOX: Mitigate need for VFS cores on NTFS drives
- UWP/XBOX: Make check for standard I/O by access rather than the just assuming based on path string
- UWP/XBOX: Add code to auto permissions so files can be accessed by non VFS cores (no exFAT or FAT32 support yet)
Télécharger RetroArch v1.10.0 (32-bit) (Windows)
Télécharger RetroArch v1.10.0 (64-bit) (Windows)
Télécharger RetroArch v1.10.0 (XP/Vista 32-bit) (Windows)
Télécharger RetroArch v1.10.0 (XP/Vista 64-bit) (Windows)
Télécharger RetroArch v1.10.0 (Nintendo GC)
Télécharger RetroArch v1.10.0 (Nintendo Wii)
Télécharger RetroArch v1.10.0 (Nintendo WiiU)
Télécharger RetroArch v1.10.0 (.3dsx) (Nintendo 3DS)
Télécharger RetroArch v1.10.0 (.cia) (Nintendo 3DS)
Télécharger RetroArch v1.10.0 (Nintendo Switch)
Télécharger RetroArch v1.10.0 (PlayStation 2)
Télécharger RetroArch v1.10.0 (PSP)
Télécharger RetroArch v1.10.0 (PS Vita)
Télécharger RetroArch v1.10.0 (Xbox One)
Site Officiel de RetroArch
 
 KEGS v1.16 
Lundi 24/01/22 à 16:33 par Firebrand
Cet émulateur Apple // pour MacOS et Linux (l'archive contient les deux versions) a été mis à jour. Les améliorations sont les suivantes:
- Better cursor focus tracking, less likely to have an invisible cursor when KEGS is no longer the active window.
- F5 now toggles the status display at the bottom on/off. This state can be saved in config.kegs.
- Added Dynapro image support--mount a host directory as a ProDOS image of up to 32MB, to allow easy moving of files to/from emulation. See README.dynapro.txt.
- Add limited Video Overlay Card (VOC) support to add new SHR mode of 640x400 (interlaced).
- You can "D"uplicate any disk image to a new file, and "V"erify any ProDOS image.
Télécharger KEGS v1.16
Site Officiel de KEGS
 
 WinUAE v4.9.1 Beta 6 
Dimanche 23/01/22 à 14:28 par Firebrand
Une nouvelle beta a été publiée pour WinUAE. Elle devrait être normalement la dernière de ce cycle voire même être la version finale. Les améliorations sont les suivantes:
- Use pre-430b5 lagless vsync behavior by default if Windows 7. -beamrace 0 command line will force 430b5+ behavior and -beamrace 1 will force pre-430b5 behavior.
- ECS Denise CSYNC blanking fixes. Denise ignores vblank strobes when deciding blanking if EXTBLKEN=1.
- Remove interlace artifact option enabled: bitplanes and sprites had 1 scanline offset. (introduced in some 490 beta)
- NTSC mode and software switch to PAL: display was incorrectly vertically stretched.
- Integer scaling only worked correctly if horizontal and vertical resolution matched (correct aspect ratio). Now also other combinations work correctly (for example superhires + any or lores + doubled)
Télécharger WinUAE v4.9.1 Beta 6 (32-bit)
Télécharger WinUAE v4.9.1 Beta 6 (64-bit)
Site Officiel de WinUAE
 
 Mednafen v1.29.0 
Mercredi 19/01/22 à 14:56 par Firebrand
Cet émulateur multi-systèmes a été mis à jour. Les améliorations sont les suivantes:
- PCE, PCE-Fast: Initialize VCE color table memory at power-on to roughly(without probabilistic bit randomness) match test results from a
- PC Engine Duo instead of just zeroing it; fixes unreadable letters in the password entry screen of "Order of the Griffon".
- Added test for potential splatting-related bug in qemu's PPC64 VSX "xscvdpsp" instruction emulation that messes up OwlResampler when compiled with gcc.
- PCE: Added patch in the "notes" subdir for extending the upper range of the "pce.slend" setting to 241(not applied in Mednafen due to increasing the probability of an extra 8ms of input lag with some games).
- VB: Fixed a couple inaccuracies in the VSU modulation emulation, fixing a few sound effects in "Virtual Boy Wario Land".
- SNES-Faust: Fixed S-DSP pitch modulation being half as strong as it should be.
- SNES: Fixed wrong compile-time endian detection on little-endian PPC64.
- PCE: Fixed incomplete initialization of the VDC BG tile cache; fixes glitches after the boss explodes in "R-Type" under certain conditions(more likely to occur in forks of Mednafen).
- NES: Added missing mapper 90 variables to save states.
- Placing a "%d" or "%b" specifier at the beginning of a filesys.fname_* setting format string will now cause the generated path to be used as-is, rather than potentially being prefixed with the corresponding filesys.path_* setting or the Mednafen base directory. Fixes a regression introduced in 1.28.0-UNSTABLE that caused IPS patch files to be loaded from the wrong location when the user had loaded a game via a relative path.
- Added support for playing the SCSP-generated music from most Sega Model 2A, 2B, 2C, and 3 games, via the new experimental "sasplay" module.
- SNES: Fixed compilation error for little-endian PPC64 with LTO enabled.
- Fixed compilation error after running configure with --disable-fancy-scalers.
Télécharger Mednafen v1.29.0 (32-bit)
Télécharger Mednafen v1.29.0 (64-bit)
Site Officiel de Mednafen
 
 FCEUX v2.6.1 
Mardi 18/01/22 à 15:37 par Firebrand
Cet émulateur NES a été mis à jour. Cette version se concentre principalement sur la correction de bugs apparus avec la v2.6.0:
Qt/SDL GUI Improvements and Bug Fixes:
- Fixed Qt cursor override stack overflow issue. Code now properly calls QGuiApplication::restoreOverrideCursor following QGuiApplication::setOverrideCursor.
- Fixed application crash when attempting to open/close the CDL window more than once.
- Fixed inverted vertical scrollbar on Qt Trace logger. Added page up/down key shortcuts for Trace logger viewport.
- Added an optional splash screen at startup. Splash screen defaults to off and can be enabled in GUI config dialog.

Qt/SDL RAM Search Improvements and Bug Fixes:
- Changed Qt RAM search logic to skip over RAM mirrors. Changed GUI to allow for searching of RAM, SRAM, and ROM regions to be individually selectable.

Qt/SDL Build Improvements:
- Applied cmake SOURCE_DATE_EPOCH patch for reproducible builds.

Qt/SDL Windows Build Dependency Upgrades:
- Upgraded to SDL version 2.0.20
- Upgraded to ffmpeg version 5.0
Télécharger FCEUX v2.6.1 (32-bit) (Windows)
Télécharger FCEUX v2.6.1 (64-bit) (Windows)
Télécharger FCEUX v2.6.1 (MacOS)
Site Officiel de FCEUX
 
 WinUAE v4.9.1 Beta 5 FR 
Dimanche 16/01/22 à 14:57 par Firebrand
On n'a pas trainé chez Tradu-France pour traduire en français la dernière beta de WinUAE.
Télécharger WinUAE v4.9.1 Beta 5 FR (32-bit)
Télécharger WinUAE v4.9.1 Beta 5 FR (64-bit)
Tradu-France
 
 WinUAE v4.9.1 Beta 5 
Dimanche 16/01/22 à 14:54 par Firebrand
Une nouvelle beta a été publiée pour cet émulateur Amiga qu'on ne présente plus. Ce cycle sera court car la version stable devrait arriver le weekend prochain. En attendant, voici les améliorations:
- Filtered lores had wrong colors if host graphics mode was 16-bit.
- Horizontal DIWSTOP = last possible horizontal position (+1 more would cause always on hdiw) didn't ignore DIWHIGH AGA H0/H1 bits, if either (or both) were set, always on diw was detected.
- Disk not in ADKCON FAST mode and normal 2us MFM disk in drive: disk index was unreliable.
- Some normal programmed WB modes unnecessarily enabled slower cycle-based custom chipset emulation.
- Another HBLANK fix, if previous line ends in border closed state and without hblank start, next line also starts in border closed state. Programmed HBLANK + AGA only, ECS Denise CSYNC blanking always resets border state when HSYNC starts.
- Previous A1000 3 lores pixel earlier change was not accurate, it is OCS Denise feature (including A1000 Denise) and it isn't hblank end difference but for some only bitplane data is not allowed until first 3 pixels, border works normally (Previous test used black border color which hide the 3 lores pixel border stripe). This is now fixed.
- In some situations old bitplane data was not properly cleared when number of planes decreased mid scanline (including change hidden in invisible part of scanline). b4 number of bitplane change side-effect.
- Adjusted overscan+/extreme positioning.
Télécharger WinUAE v4.9.1 Beta 5 (32-bit)
Télécharger WinUAE v4.9.1 Beta 5 (64-bit)
Site Officiel de WinUAE
 
 FCE UltraX v2.6.0 FR 
Mercredi 12/01/22 à 14:45 par Firebrand
La dernière version de FCEUX est déjà disponible en français grâce à Tradu-France.
Télécharger FCE UltraX v2.6.0 FR
Tradu-France
 
 FCEUX v2.6.0 
Mercredi 12/01/22 à 14:43 par Firebrand
Cet émulateur NES a été mis à jour. Les améliorations sont les suivantes:
The 2.6.0 release features the addition of the TAS Editor to the Qt/SDL port. There are also a few other minor bug fixes.

Qt/SDL
TAS Editor
- The full TAS editor has been ported over from the Win32 version. Other than minor layout changes, Win32 TAS users should find it familiar.

GUI Improvements and Bug Fixes
- Fixed occasional stack overflow issue due to unintended recursion in Qt event loop.

Video Improvements and Bug Fixes
- Added video vertical sync config option.
- Added built-in video vertical sync test pattern.

Input Improvements and Bug Fixes
- Added escape characters to gamepad config files to fix keyboard binding issue for ‘,’ and ‘\’ keys.

Build Improvements
- Replaced a few soon-to-be deprecated ffmpeg function calls.
- Cleaned up a few compiler warnings.
Télécharger FCEUX v2.6.0 (32-bit)
Télécharger FCEUX v2.6.0 (64-bit)
Site Officiel de FCEUX
 
 GameEx Arcade Edition v17.19 
Mardi 11/01/22 à 15:00 par Firebrand
Cette version de GameEx continue d'être mise à jour sans la version standard. Les changements ne sont pas connus.
Télécharger GameEx Arcade Edition v17.19
Site Officiel de GameEx Arcade Edition
 
 Fichiers additionnels pour MAME v0.239 (2ème partie) 
Lundi 10/01/22 à 15:52 par Firebrand
Les derniers fichiers additionnels pour ce cycle de MAME ont été publiés. Voici les changements:
BestGames.ini v0.239 (1.29):
- 2022/01/09 1.29: Online the version 0.239; 8 new games added (3,458 evaluated).

Messinfo.dat v0.239 (11.25):
- 11.25 01/09/2022: Aligned files to 0.239 version.
Télécharger BestGames.ini v0.239 (1.29)
Télécharger Messinfo.dat v0.239 (11.25)
ProgettoSNAPS
 
 WinUAE v4.9.1 Beta 4 FR 
Lundi 10/01/22 à 15:45 par Firebrand
L'équipe de Tradu-France a traduit en français la dernière beta de WinUAE.
Télécharger WinUAE v4.9.1 Beta 4 FR (32-bit)
Télécharger WinUAE v4.9.1 Beta 4 FR (64-bit)
Tradu-France
 
 WinUAE v4.9.1 Beta 4 (32-bit) 
Lundi 10/01/22 à 15:43 par Firebrand
Une nouvelle beta a été publiée pour cet émulateur Amiga. Voici la liste des changements:
- uaegfx overlay wasn't synced with screen dragging. It still works strangely if screen with overlay is not in front screen because Picasso96 does not yet support overlay fully during screen dragging.
- Reset filter button didn't reset manual filter settings.
- Added IDE scsi.device disable option to misc panel list.
- if number of planes changed mid scanline, whole line was drawn using planecount that was active when line started. If plane count was increased mid scanline, line was still drawn using lower plane count. If plane count was lowered, output was correct. (vAmiga test)
- Fixed x86 bridgeboard (AT variants only) boot crash if optimized build. Not sure if it was compiler bug or something else but I found a way to work around it. I think this exact same bug has happened previously.
- A1000 left hblank ends 3 lores pixels later than other models.

Later 4.9.0 beta series introduced bugs:
- If VSYNC starts after vertical wraparound (can happen in programmed modes), lines after wraparound before VSYNC was not drawn.
- HCENTER (ECS Denise only) "blanking" didn't work.
- Left side didn't open far enough in extreme overscan mode.
- OCS Agnus + OCS Denise: last blanked line bug on top of screen was not visible if line also had bitplane enabled.
- Direct 3D 11 mode shader buffer leak fixed. Caused crash after few dozens or so display mode switches. (4.9.0)
Télécharger WinUAE v4.9.1 Beta 4 (32-bit)
Télécharger WinUAE v4.9.1 Beta 4 (64-bit)
Site Officiel de WinUAE
 
 Raine v0.92.6 
Lundi 10/01/22 à 15:41 par Firebrand
Deux versions consécutives ont été publiées pour cet émulateur arcade. Les améliorations sont les suivantes:
v0.92.6:
- Anyway it's just a quick fix of 0.92.5 problems : crash if opening the sound options dialog, leaving it, and opening it again (!)
Bad playing frequency of external audio tracks (except the raw format ones !)
- And there was a bad entry added to the hiscore.dat hosted here, it's probably me who added it, but a very long time ago, it was for viewpoint, and the syntax was a mix between the old format and the new one, and the hiscore parser didn't like it (what a surprise !). Since this file was here for more than 1 year, I fixed the parser to accept this syntax too, even if it's the only entry of this kind in the hiscore.dat !
- And I added the hiscore.dat to all the binary packages, linux & windows (going from 2.5 Mb to 2.6 Mb, what a deal... !).

v0.92.5:
- Slow progress, while I was in the audio functions, I added the ability to change the audio driver and the audio device from the gui. For the device, most computers have only the default sound card, but for the one I have plugged to a tv, it has actually 4 devices, 1 for the analog output, 1 for the digital output (the digital plug behind the computer, that's the one I have been using for many years), 1 for hdmi 0, and the last for hdmi 1, these 2 hdmi being what the video card exports.
Which finally allows me to switch easily the sound between the stereo and the tv, I had never actually used the sound output on the hdmi until now on this setup, it doesn't sound bad...
For the driver, it shouldn't be useful for most users, for wndows it's directsound by default. For linux it's pulseaudio if possible, otherwise alsa, otherwise dsp. The names of the output devices change depending on the selected audio driver... ! And each audio driver can have a preferred frequency, so the default frequency changes with it.
Also the neocd raw audio tracks which worked previously only if you had set your audio output at 44.1 Khz (cd quality), now work with any output frequency, and it doesn't sound bad at 11 Khz actually ! (at least for the game which I tested, which was viewpoint). The conversion for the wav/mp3/ogg/flac format was already done automatically, there was only this raw format which had no conversion and which required 44.1 Khz output.
- Very old stuff : I found lately a forgotten file in the git repository, galaxian.c in the sound directory which was a beginning of the emulation of the sound for galaxian, which I had started around 2007, and then completely forgotten, it was imported in the initial commit to git in 2009 and I didn't even notice !
At that time I had given up the idea because the sound for galaxian is quite crazy, there is no sound command, no dedicated cpu for the sound, and the main cpu directly plays with frequencies to generate sounds. Which means you have some basic square signal generated at a very low frequency which must be converted to a playable frequency, and then it changes the base frequency of the signal in real time... ! Add to that that the background sound you hear during gameplay is generated by 3 samples playing at the same time at slightly different frequencies, + 2 channels for the sounds, controlled by timers too because otherwise it's not fun... !
Since I was busy with sound options lately and I felt more comfortable with sample rate conversions, I gave it another try, and this time it's good, galaxian finally has an emulated sound. By the way this game is supposed to date from 1979, it's amazing what such an old game can do ! Until now it had only emudx samples, but it really felt incomplete, in the real game you have a background sound which slowly accelerates when there are fewer and fewer enemies on screen, that was really missing from the emudx version. You can still choose to have emudx sprites and/or emudx sound to compare anyway !
- Except that a few more fixes, the more outstanding one at least for me was a bug in the hiscores which could wrongly reset its status for some game, I found out on some very old one, "ms pacman attacks", which is available from "multipac 1.5", it lost its hiscores a few seconds only into the game ! It probably affected some other games too.
- Lots of small fixes for emudx games, it's been a long time since I didn't touch this, by the way the initialization of emudx games crashed in 0.92.4, so if you want to test that you need this version !
- Also a lot of sound chips now correctly save their state in the savegames, games like batrider now restore correctly their sound finally (yeah it should have been done long ago... oh well !).
Télécharger Raine v0.92.6 (32-bit) (Windows)
Télécharger Raine v0.92.6 (64-bit) (Windows)
Télécharger Raine v0.92.6 (32-bit) (Linux)
Télécharger Raine v0.92.6 (64-bit) (Linux)
Site Officiel de Raine
 
 Nintendulator FR v0.985 Beta (05/01/22) 
Lundi 10/01/22 à 15:30 par Firebrand
L'équipe de Tradu-France a traduit en français l'avant-dernière version de cet émulateur NES.
Télécharger Nintendulator FR v0.985 Beta (32-bit) (05/01/22)
Télécharger Nintendulator FR v0.985 Beta (64-bit) (05/01/22)
Tradu-France
 
 Nintendulator v0.985 Beta (07/01/22) 
Samedi 08/01/22 à 14:39 par Firebrand
Cet émulateur NES a été mis à jour mais les changements ne sont pas connus.
Télécharger Nintendulator v0.985 Beta (32-bit) (07/01/22)
Télécharger Nintendulator v0.985 Beta (64-bit) (07/01/22)
Site Officiel de Nintendulator
 
 RomVault v3.4.3 
Vendredi 07/01/22 à 14:23 par Firebrand
Ce gestionnaire de ROMs a ét émis à jour. Les améliorations sont les suivantes:
This is a big update for DATVault users, now means DATVault can support suggested DIR's for each new DAT. That means TOSEC can be downloaded into the TOSEC recommended DIR structure directly from DATVault!
There are a few other quality of life bug/improvements also. As always you can download this latest version from the link over on the left.
(TOSEC DATs will be added to DATVault in the next few days.)

Feature Updates:
- Added a progress bar for DATVault initial data load
- Added a new sortable DATVault column for uncompressed size of DAT contents
- Added a new default DAT directory feature to DATVault to help people quickly add new DATs using the most common organization approaches
- Added Windows long path support to DATVault operations (to coincide with supporting TOSEC DATs)
- Enhanced DATVault performance by compressing server to client payloads with ZSTD
- Changed the Update DATs shortcuts for consistency

Bug Fixes:
- Fix for a crash that could occur when double clicking an archive in a ToSort directory from the game grid
- Fix for a crash that could occur when both discontinued and new DATs in DatVault are selected then clicking the Add button
- Fix to disable saving/applying tree presets during scanning/fixing
- Fix to better handle case sensitive renames by waiting before attempting to reference files from a newly renamed archive
Télécharger RomVault v3.4.3
Site Officiel de RomVault
 
 Nintendulator v0.985 Beta (05/01/22) 
Jeudi 06/01/22 à 12:04 par Firebrand
Cet émulateur NES a été mis à jour. Les améliorations sont les suivantes:
- The first build for the new year adds support for an extremely obscure feature recently discovered in one revision of the Nintendo MMC1 mapper, along with a UNIF mapper fix for MMC3 boards that could be reconfigured for hardwired mirroring.
Télécharger Nintendulator v0.985 Beta (32-bit) (05/01/22)
Télécharger Nintendulator v0.985 Beta (64-bit) (05/01/22)
Site Officiel de Nintendulator
 
 Fichiers additionnels pour MAME v0.239 
Mercredi 05/01/22 à 15:13 par Firebrand
AntoPISA a mis à jour ses fichiers additionnels pour MAME v0.239:
Catlist/Catver v0.239:
2022/01/04: Aligned files to MAME 0.239.

Languages.ini v0.239 (1.31):
- 2022/01/04 1.31: Added 0.239 sets.

Series.ini v0.239:
- Items RENAMED (4): (ddpdojblka) to (ddpdojblkb), (majest12u) to (majest12ua), (srmvs) to (srmvsa) and (peps0280) to (peps0280a).
- Series UPDATED (9): DonPachi, Fantasia, Final Fight, Gals Panic, Golden Tee, Off Road, Player's Edge, Puyo Puyo, Space Invaders and Super Real Mahjong.
Télécharger Category.ini v0.239
Télécharger Catlist/Catver v0.239
Télécharger Languages.ini v0.239 (1.31)
Télécharger Series.ini v0.239
Télécharger Version.ini v0.239
ProgettoSNAPS
 
 GameEx Arcade Edition v17.17 
Mercredi 05/01/22 à 15:01 par Firebrand
Cette mise à jour ne concerne, pour une fois, que l'Arcade Edition de GameEx. Voici les changements apportés:
- Adds the all games list to GameEx Arcade Edition.
Télécharger GameEx Arcade Edition v17.17
Site Officiel de GameEx Arcade Edition
 
 WinUAE v4.9.1 Beta 3 FR 
Dimanche 02/01/22 à 15:46 par Firebrand
La dernière version de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v4.9.1 Beta 3 FR (32-bit)
Télécharger WinUAE v4.9.1 Beta 3 FR (64-bit)
Tradu-France
 
<< Page précédentePage suivante >>
2001-2022 Planet Emulation