Organiser
Filtrer par machine :
Type de vue :
 
 ClrMAME Pro v4.047 
Mardi 20/12/22 à 14:02 par Firebrand
Une nouvelle version de ce gestionnaire de ROMs a été publiée. Les améliorations sont les suivantes:
- updated ziparchive (4.6.9) and unrar (6.20.3)
- misc: show warning when trimming removed a whitespace rom names with subfolders
Télécharger ClrMAME Pro v4.047 (32-bit)
Télécharger ClrMAME Pro v4.047 (64-bit)
Site Officiel de ClrMAME Pro
 
 RetroArch v1.14.0 
Mercredi 14/12/22 à 14:30 par Firebrand
Cet ensemble de noyaux d'émulateurs réunis sous une même interface a été mis à jour. Les améliorations sont les suivantes:
- AUDIO/COREAUDIO/APPLE: Allow coreaudio3 driver to work with audio devices that have 2 or more output channels
- CHEEVOS: Fix construction of Cheevos badge path
- CLI: Fixed not getting any output when running –version or –features without –verbose
- CLI: Fixed crash when running empty – parameter (it proceeded to content loading)
- CLI: Reformatted –features to require less rows and to be more consistent
- CLI: Added -V shorthand for –version
- CLI: Tab removal + whitespace nits
- CONFIG/MIDI: Prevent MIDI startup error with old configurations
- D3D11: Fix when using shaders with TATE mode arcades etc
- D3D12: Fix when using shaders with TATE mode arcades etc
- D3D12: Added support for break on errors (development aid – define DEVICE_DEBUG to use)
- D3D12: Added support for DRED (device remove extended data) (development aid – define DEVICE_DEBUG to use)
- D3D12: Made D3D12 viewport and scissors to behave more like Vulkan drivers (or be more correct)
- D3D12: Fixed some shaders not appearing with the d3d12 driver – this reintroduces a validation error though but it seems to work as in not crash and is the old RA behaviour. Guess we need a different way of fixing the validation issue.
- D3D12: Fixed validation error on start up due to buffers not being setup correctly for one frame
- DATABASE/EXPLORE/VIEW: Bugfix – RGUI did not clear thumbnail on non-playlist items such as Save and Delete menu_explore_get_entry_playlist_index() returns -1 on invalid entries, but the variable where it was stored was unsigned
- DATABASE/EXPLORE/VIEW: Bugfix – XMB+Ozone cleared thumbnail in Quick Menu when navigating away from Run
- DRM/ODROID GO2: Implement get_video_size for DRM GL context driver
- FASTFORWARD: Restore framelimit on fastforward toggle. Fast-forward was broken after toggling vrr_runloop off, since it will force frame limit to 1.0 (even on every frame) and never restores it. So let’s make sure the wanted ratio is applied when toggling FF (Fastforward).
- FFMPEG CORE: Fix runtime error in FFmpeg core when build with FFmpeg n5.1.2 and OpenGL ES
- GFX/VIDEO FILTERS: (picoscale_256x_320x240) Added snn function to upscale Fuse (ZX Spectrum) core borderless output to 320×240. ZX Spectrum resolution of 256×192 was previously unsupported.
-HOTKEYS: Further reorder internal hotkey items for consistency and removed SEND_DEBUG_INFO, OVERLAY_NEXT and OSK from visible hotkey bind list. “Send Debug Info” stuff is removed as much as possible without breakage due to translation files.
- INPUT/AUTOCONFIG: Disable ‘pause on controller disconnect’ by default – was enabled by default on 1.13.0
- INPUT/MENU: Device Index menu refactor
- INPUT/OVERLAY: Fix analog drift blocking touch input (could occur on overlay_next if physical inputs shown on overlay)
- INPUT/OVERLAY: Fix overlay_next buttons lighting up in unison
-INPUT/OVERLAY: Skip meta keys in input_overlay_add_inputs (not supported by input_state_internal)
- INPUT/WINDOWS/WINRAW: Fix mouse position when using input overlay with mouse cursor
- INPUT/WINDOWS/WINRAW: Fixed mouse position to use the same method required for menu items and pointer when simulating input overlays with mouse, since it won’t work with multi mouse method
- INPUT/WINDOWS/WINRAW: Fixed passing mouse position to core also when using aforementioned method
- LEAPFROG: Add Leapfrog (LFx000) Target
- LOCALIZATION: Updates
- LOCALIZATION/INPUT/IME/MENU/ONSCREEN KEYBOARD: Extended IME and Korean OSK
- MENU: Cleanup of help texts
- MENU: Allow toggling info off with the same button
- MENU: Allow menu wallpaper/background reset. Let’s also remove the current wallpaper from the screen when pressing Start.
- MENU: Null driver shows with different color (Added for all menus the ability to show “disabled” items with a muted color)
- MENU/DRIVERS: Menu driver first, Audio Resampler removed because it is enough to exist under audio settings
- MENU/INPUT: Moved “Confirm Quit” to Input menu
- MENU/INPUT/HOTKEYS: Input hotkey menu completely overhauled to keep related entries together, and also adjusted some labels and sublabels
- MENU/OVERLAY: Fix overlays behind menu without core running. “Show Overlay Behind Menu” is currently broken with Ozone and XMB (with any other color theme than Plain) when running without a core.
- MENU/MATERIALUI: Fix home screen on first startup – no more stray entries
- MENU/OZONE: Allowed drawing sidebar and thumbnail bar background color also when core is running
- MENU/OZONE: Stopped using different padding and position for savestate thumbnails vs imageviewer
- MENU/OZONE: Removed gradient background effect when core is running, because some themes already have gradient background, which creates ugly rough steps
- MENU/OZONE: Fixed “Gray Light” theme from using the same background as “Gray Dark”, which makes selection cursor near impossible to see
- MENU/OZONE: Some whitespace corrections
- MENU/UX: Extend OFF menu value colors
- MENU/UX: Menu icon improvements – Menu Visibility icons (Quick Menu + Settings)
- MENU/UX: Menu icon improvements – Playlist Manager icons
- MENU/UX: Menu icon improvements – Explore icon as database icon
- MENU/UX: Menu icon improvements – View and filter icons as cursor icon (folder icon in GLUI)
- MENU/UX: Menu icon improvements – View save + delete icons
- MENU/UX: Menu icon improvements – Moved Explore + Views below Standalone Cores
- MENU/UX/OZONE: Removed icons from menus where others items don’t have icons, and added icons to menus where the rest have icons
- MENU/UX/OZONE: Changed the way “no icon” is handled from kludgy way of not drawing SUBSETTING icon
- MENU/UX/XMB: Changed playlist entry index positioning to bottom right when thumbnails are in vertical mode, because big lists will overlap with arrow and current “breadcrumb” icons when the position is next to current selection
- MENU/UX/XMB: Added a rather nasty hack to prevent showing wrong icons under Explore as “breadcrumb” icon
- MENU/UX/XMB: Optimized certain icon drawing loops (Main horizontal icons were looped even when not visible, and all previous “breadcrumb” icons were looped when only one certain was needed)
- MENU/UX/MATERIALUI: Fixed showing icons where there should not be any (Waitable Swapchains, Show Recording + Streaming)
- OSX/MACOS: Fixed Cocoa keyboard not allowing to map Analog stick
- PS2: Use the recently created ps2_drivers which makes easier the loading and init of all the drivers: Memory Card, USB, HDD, Audio, Controllers
- PS2: Adds exFat support for USB, and probably solves some unexpected issues when using an HDD driver for booting cores/games.
- SDL GFX: Fix no menu on start/blank screen issue.
- SRAM: Don’t init SRAM saving without content (gets rid of the redundant logging)
Télécharger RetroArch v1.14.0 (32-bit) (Windows)
Télécharger RetroArch v1.14.0 (64-bit) (Windows)
Télécharger RetroArch v1.14.0 (XP/Vista 32-bit) (Windows)
Télécharger RetroArch v1.14.0 (XP/Vista 64-bit) (Windows)
Télécharger RetroArch v1.14.0 (64-bit) (MacOS)
Télécharger RetroArch v1.14.0 (Metal2) (MacOS)
Télécharger RetroArch v1.14.0 (Linux)
Télécharger RetroArch v1.14.0 (Nintendo GC)
Télécharger RetroArch v1.14.0 (Nintendo Wii)
Télécharger RetroArch v1.14.0 (Nintendo WiiU)
Télécharger RetroArch v1.14.0 (.3dsx) (Nintendo 3DS)
Télécharger RetroArch v1.14.0 (.cia) (Nintendo 3DS)
Télécharger RetroArch v1.14.0 (Nintendo Switch)
Télécharger RetroArch v1.14.0 (PlayStation 2)
Télécharger RetroArch v1.14.0 (PSP)
Télécharger RetroArch v1.14.0 (PS Vita)
Télécharger RetroArch v1.14.0 (Xbox One)
Site Officiel de RetroArch
 
 NegaMAME v0.250-1 
Lundi 05/12/22 à 14:35 par Firebrand
Ce build de MAME prévu pour fonctionner avec le frontend Negatron a été mis à jour avec les sources de MAME v0.250.
Télécharger NegaMAME v0.250-1 (Windows)
Télécharger NegaMAME v0.250-1 (MacOS)
Télécharger NegaMAME v0.250-1 (Linux)
Site Officiel de NegaMAME
 
 RetroBat v5.0.0 
Dimanche 04/12/22 à 10:24 par Firebrand
Cet ensemble de script conçu pour configurer automatiquement le frontend EmulationStation avec RetroArch et différents émulateurs autonomes a été mis à jour. Les améliorations sont les suivantes:
New systems

– Adventure Vision
– amiga 4000
– apfm1000
– Arcadia 2001
– Astrocade
– BBC micro
– Camputers Lynx
– Philips CD-I
– Color Computer
– CreatiVision
– FM 7
– Gamate
– Game.com
– Game Pocket Computer
– GameBoy Advance 2 players
– Game Master
– LCD Games
– Megadrive-msu
– Mega-Duck
– Neo-Geo 64
– PV-1000
– Super Cassette Vision
– Super Game Boy
– Super A’Can
– TI-99
– Tomy Tutor
– TV Games
– VSmile

New features

– New Retrobat integrated Updater & Emulators download/update functionnality
– New content downloader
– Add incremental savestate support
– Add support for lightguns and Wiimote Guns, new lightgun games collection and removal of «*lightgun*» rom folder
– Sinden Lightgun support
– Duimon’s Mega-Bezel pack support
– Support of zipped roms decompression
– Add image viewer to Retrobat
– Autodetection of best mame version when set to auto
– XInput drivers for libretro
– Add: support for Retroachievements “Challenge” indicator

Cores

– a5200
– fbalpha (current)
– fceumm
– gearcoleco
– imageviewer
– mame2000
– mame2010
– swanstation

Standalone

– 3DSen (emulator not provided)
– Hypseus (fork of Daphne)
– no$gba (gba 2 players)
– pcsx2 1.7 SSE4 and AVX2 versions
– pcsx2 1.6 version moved to pcsx2-16 folder (pcsx2 folder used for 1.7 version)
– PinballFX3 (through Steam integration)
– ScummVM
– Yuzu early access

Miscellenaous

– moved all bioses to \bios folder and updated bios list md5 checks
– Add new music theme
– New version of Batgui.exe (not all functionalities have been ported yet)
– Group system features into submenus in Retrobat advanced configuration menu
– Option to invert A and B buttons
– Removed arcade system, replaced with individual system folders
– 64dd folder renamed n64dd
– New SDL version
– Additional features directly accessible from Retrobat to avoid setting up the features in the emulators (PS3, PS2, Yuzu, scummvm, dolphin, …. and many others)

Retrobat

– New Website
– New Wiki
Télécharger RetroBat v5.0.0
Site Officiel de RetroBat
 
 RetroArch v1.13.0 
Dimanche 20/11/22 à 15:51 par Firebrand
Cet ensemble de noyaux d'émulateurs réunis derrière une même interface a été mis à jour. Les améliorations sont le suivantes:
- 3DS: Remove debug button combo to shutdown RA
- 3DS: Remove MaterialUI as per MrHuu recommendation
- ANDROID: Enable ‘Vibrate On Key Press’ haptics by default
- ANDROID: Turn ‘Threaded Video’ off by default
- CHEEVOS: Upgrade to rcheevos 10.5
- COMPILATION: Fixed compiling with –disable-menu
- CONFIG: Don’t show override notification with appendconfig alone
- DATABASE/PLAYLISTS: Playlist + database changes – Cleanup ‘entry_slot’, fallback label + logging
- FRONTEND: Fix default remaps folder for various cores: remap should … …be nested in config folder
- HOTKEYS: Fix shader toggle and add hotkey + sublabel
- HOTKEYS: Cleanups and corrections – Keep hotkey pause and menu pause separate in order to not trigger unwanted pause when toggling menu regardless if menu will pause or not
- HOTKEYS: Cleanups and corrections – Allow unpausing with Start (makes resuming more convenient after controller disconnect if menu does not pause)
- IOS13+: Pointer movement accuracy. iPad Trackpad Pointer Movement Accuracy through absolute location (for iOS 13.4 and above)
- IOS13+: Adds iPad Trackpad Support to iOS13 Project (for iOS 13.4 and above)
- INPUT: Fixed the way devices were previously indexed. Input devices were only being indexed in order and would stop at the first time an input has no device connected to it. The problem is when a device gets disconnected, that input will have no devices connected to it, but the next input may still have a device connected. So, that makes changing the port of the currently connected devices impossible.
- INPUT/AUTOCONFIG: Add option for pause on controller disconnect
- INPUT/AUTOCONFIG: Driver independent disconnection notification. Should show disconnect notification now properly on Windows with XInput and/or DirectInput pads
- INPUT/HID: Added usb hid controllers for the famous ZeroDelay encoder and also for “Kade: Kick Ass Dynamic Encoder” to be able to use some custom arcade sticks.
- INPUT/OVERLAY: Add eightway area types.
- INPUT/OVERLAY: Fix overlay next_index for unnamed targets
- INPUT/OVERLAY: Ignore hitboxes with zero area. I.e. Set ‘reach_x’ or ‘reach_y’ to zero to ensure no hitbox math is done. This simplifies designating animation-only descriptors (e.g. for eightway areas) or obsolete descriptors.
- INPUT/OVERLAY: Add ‘reach’ and ‘exclusive’ for hitboxes. Allows stretching hitboxes and handling their overlap.
- INPUT/MENU: Addition to analog stick menu navigation
- INPUT/MENU: Enable menu navigation also with right analog stick
- INPUT/MENU: Add option for swapping menu scrolling buttons
- LOCALIZATION: Updates
- LOCALIZATION: Add Hungarian language option
- MENU: Thumbnail fullscreen toggle behavior correction
- MENU: Consistent left-right scrolling for Quick Menu items
- MENU: Remove useless sublabel from System Information
- MENU: Improve widget appearance with missing assets
- MENU/QT/WIMP: Remove SSL/TLS check at startup
- MENU/OZONE: Show metadata helper in footer only with second thumbnail
- MENU/OZONE: Footer improvements – Add “Cycle thumbnails” helper when suitable
- MENU/OZONE: Footer improvements – Show “Search” helper only when search function is enabled
- MENU/OZONE: Footer improvements – Fix “Thumbnails available” helper for save states
- MENU/OZONE: Footer improvements – Tighten padding between icon and title, and widen between helpers
- MENU/OZONE: Launching anything from a View no longer throws Quick Menu off the screen
- MENU/OZONE: Save state thumbnails in slot dropdown obeys fullscreen toggle properly when content launched via CLI
- MENU/OZONE: Save state thumbnail dropdown won’t allow fullscreen toggle when it shouldn’t
- MENU/OZONE: Selection position remembering in non-playlists won’t flash the first entry
- MENU/OZONE: Remember selection per main tabs
- MENU/OZONE: Remove incomplete assets warning
- MENU/OZONE: Add option to adjust cursor memory when changing menu tabs
- MENU/OZONE: Further extend texture support for Core Option categories
- MENU/XMB: Remove incomplete assets warning
- MENU/XMB: Add truncate playlist name option
- MENU/XMB: Improve background image selector
- MENU/XMB: Add option to adjust cursor memory when changing menu tabs
- MENU/XMB: Further extend texture support for Core Option categories
- MENU/MATERIALUI: Remove incomplete assets warning
- OSX: Fixed Z/X keys not working on the macOS port
- OSX: Fixed RETROK_LMETA not working on macOS port. The RETROK_LMETA key was not defined in the rarch_key_map_apple_hid
- OSX: Fix broken fullscreen mode in macOS Ventura
- PS2: Fix Error saving remaps and runtime logs
- PS3: Fix Core Remap Overwrite Fail
- QB: Don’t fail if OSDependent/OGLCompiler libraries are not present
- SCANNER/PS1: Improved scanning of PS1 discs
- SCANNER/PS2: Added serial scanning of PS2 discs – should now scan DVDs and other discs which were previously missed
- THREADED VIDEO/GLCORE: Fix regression ‘Shader presets dont load, when video driver is set to glcore’
- VULKAN: Fix HDR inverse tonemapping. Only skip tonemapper if HDR10 is explicitly enabled by last shader pass. Otherwise, we are simply just inheriting the bit-depth of the swapchain.
Télécharger RetroArch v1.13.0 (32-bit) (Windows)
Télécharger RetroArch v1.13.0 (64-bit) (Windows)
Télécharger RetroArch v1.13.0 (XP/Vista 32-bit) (Windows)
Télécharger RetroArch v1.13.0 (XP/Vista 64-bit) (Windows)
Télécharger RetroArch v1.13.0 (64-bit) (MacOS)
Télécharger RetroArch v1.13.0 (Metal2) (MacOS)
Télécharger RetroArch v1.13.0 (Linux)
Télécharger RetroArch v1.13.0 (Nintendo GC)
Télécharger RetroArch v1.13.0 (Nintendo Wii)
Télécharger RetroArch v1.13.0 (Nintendo WiiU)
Télécharger RetroArch v1.13.0 (.3dsx) (Nintendo 3DS)
Télécharger RetroArch v1.13.0 (.cia) (Nintendo 3DS)
Télécharger RetroArch v1.13.0 (Nintendo Switch)
Télécharger RetroArch v1.13.0 (PlayStation 2)
Télécharger RetroArch v1.13.0 (PSP)
Télécharger RetroArch v1.13.0 (PS Vita)
Télécharger RetroArch v1.13.0 (Xbox One)
Site Officiel de RetroArch
 
 Messinfo.dat v0.249 (11.38) 
Vendredi 11/11/22 à 14:52 par Firebrand
Le dernier fichier additionnel de ProgettoSNAPS pour cycle de MAME a été publié. Voici les changements:
- 11.38 11/10/2022: Aligned files to 0.249 version.
Télécharger Messinfo.dat v0.249 (11.38)
Site Officiel de Messinfo.dat
 
 GameEx v18.35 (.NET 6, 64-bit) 
Jeudi 10/11/22 à 11:53 par Firebrand
De nouvelles versions de ces frontends multi-systèmes ont été publiées. Les changements ne sont pas connus.
Télécharger GameEx v18.35 (.NET 6, 64-bit)
Télécharger GameEx v18.35 (32-bit)
Télécharger GameEx Arcade Edition v18.35 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.35 (32-bit)
Site Officiel de GameEx
 
 GameEx et GameEx Arcade Edition v18.34 
Mercredi 09/11/22 à 13:55 par Firebrand
Ces frontends multi-systèmes ont reçus trois mises à jour consécutives. Mais seules les notes pour la v18.32 sont (pour l'instant?) disponibles:
v18.32:
- For complete MAME list customization if required you can now specify a custom listxml file.
Télécharger GameEx v18.34 (.NET 6, 64-bit)
Télécharger GameEx v18.34 (32-bit)
Télécharger GameEx Arcade Edition v18.34 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.34 (32-bit)
Site Officiel de GameEx
 
 GameEx et GameEX Arcade Edition v18.31 
Lundi 07/11/22 à 12:12 par Firebrand
Ces frontends multi-systèmes ont été mis à jour. Une seule nouveauté est à signaler:
- New and updated HBMAME profile and download.
Télécharger GameEx v18.31 (.NET 6, 64-bit)
Télécharger GameEx v18.31 (32-bit)
Télécharger GameEx Arcade Edition v18.31 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.31 (32-bit)
Site Officiel de GameEx
 
 GameEx et GameEx Arcade Edition v18.30 
Jeudi 03/11/22 à 11:48 par Firebrand
Ces frontends multi-systèmes ont été mis à jour, mais les changements ne sont pas connus.
Edit: Les nouveautés ont été dévoilées avec un peu de retard:
- Adds Retroarch emulator profiles for MAME 2013, 2013 Plus and 2010.
- MAME Listxml files can now be used as map fiiles. Hyperlist, and MAME software lists were already supported.
Télécharger GameEx v18.30 (.NET 6, 64-bit)
Télécharger GameEx v18.30 (32-bit)
Télécharger GameEx Arcade Edition v18.30 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.30 (32-bit)
Site Officiel de GameEx
 
 NegaMAME v0.249-1 
Dimanche 30/10/22 à 14:22 par Firebrand
Ce biuld de MAME pensé pour être utilisé avec le frontend Negatron a été mis à jour vers MAME v0.249.
Télécharger NegaMAME v0.249-1 (Windows)
Télécharger NegaMAME v0.249-1 (MacOS)
Télécharger NegaMAME v0.249-1 (Linux)
Site Officiel de NegaMAME
 
 RomVault v3.5.1 
Mardi 25/10/22 à 14:16 par Firebrand
Une nouvelle version de ce gestionnaire de ROMs a été publiée. Voici les nouveautés:
Feature Updates:
- Added experimental support for Dark Mode, enabled with a RomVault3cfg.xml flag (true)
- Added TorrentZipUI into the RomVault interface, accessible via the Help menu
- Added the ability for anyone (not just DatVault users) to submit “MIA Found” info to DatVault
- Added a new setting to send “MIA Found” information anonymously
- Added artwork support in the for the C64 DAT

Bug Fixes:
- Enhanced the scanning progress window to show the file currently being processed
- Enhanced the MIA submission functionality to support CHDs
- Enhanced the Game Info panel by adding the Category value
- Enhanced the Game List grid filter to clarify merged and deduped
- Fix for a bug where CHDs were incorrectly merged if the DAT contains CHDs with a .chd extension
- Fix for a bug that could cause CHD files to be incorrectly named with an extra .chd extension
- Fix for a crash if RomVault is launched without a DatRoot directory
- Fix for a crash that could occur when an MIA file is found but DatVault is unreachable or times out
- Fix for a crash due to “Incorrect Extraction size found 0 expected X” while scanning a corrupt archive with Shrink compression
- Fix for incorrectly reporting ZIP files as corrupt that used Deflate64
- Removed unnecessary Console.Write lines that could slow down scanning / fixing using Linux
Télécharger RomVault v3.5.1
Site Officiel de RomVault
 
 GameEx et GameEx Arcade Edition v18.29 
Mardi 25/10/22 à 14:11 par Firebrand
Ces frontends ont été mis à jour. Les améliorations sont les suivantes:
- Fixes Windows XP compatibilty for installer out of the box. Why? I just don’t know anymore. Seriously, for Wine and ReactOS, and XP is still awesome!.This is also the first release built on my new Ryzen 7950x DDR5 rig.
Télécharger GameEx v18.29 (.NET 6, 64-bit)
Télécharger GameEx v18.29 (32-bit)
Télécharger GameEx Arcade Edition v18.29 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.29 (32-bit)
Site Officiel de GameEx
 
 RetroArch v1.12.0 
Mardi 18/10/22 à 14:18 par Firebrand
Une nouvelle version de cet ensemble de noyaux d'émulateurs réunis dans une même interface a été publiée. Voici la liste des changements:
- CONFIG/CLI: Allow use of –appendconfig with override cfgs instead of getting ignored
- CONFIG/LOGGING: No more console startup logging if logging to file
- CONFIG: Saves config on exit only once instead of (worst case scenario) 3 times
- DATABASE/EXPLORE/VIEW: Add View feature – Add saving of a filter set in the Explore menu into a so called “View” file which then gets listed alongside playlists. This also adds the ability to filter a category by range in the Explore menu and not just filter on exact matches.
- FILEBROWSER: Fix regression – certain extensions keep disappearing
- IOS: New modern iOS version (targeting iOS 13 and up), leverages Swift
- IOS: Fixes to iOS toolbar
- IOS16: Add iOS 16 lock screen widget
- IOS13+: Added emulator keyboard
- IOS13+: Add JIT support for non-jailbroken devices
- IOS13+: Added support for touch mouse handler
- IOS13+: Changed click-and-drag behavior to double tap hold and drag
- INPUT/HAPTIC/OVERLAYS/ANDROID: Improve haptic feedback for input overlays
- LINUX/MALI FBDEV: Add conditional support for OpenGL ES 3.x
- LOCALIZATION: Updates
- LOCALIZATION/ENGLISH: Add British English language option
- LOGGING/QT: Increase log buffer to 2048 characters – Vulkan validation layer messages output correctly now.
- MENU/XMB: Remember selection per main tabs. Addresses the following : collection playlists can contain hundreds or thousands of items. When scrolling through one, pressing left or right by accident can be common. This resets the playlist to the top
- MIST/STEAM/STEAMDECK: Don’t expose Black Frame Insertion (BFI) if we are running on a Steam Deck
- NETWORKING/WINDOWS: Disable poll support for MSVC 2010 and earlier. WSAPoll is not supported on Windows XP and earlier.
- NETWORKING/WIIU: Fix socket_connect_with_timeout for WIIU
- NETWORKING/WIIU: Fixes RetroAchievements login
- NETWORKING/WIIU: Fixes other online updater functionality
- SAVESTATES/NOTIFICATIONS: Add delay to savestate notifications, so that GPU savestate screenshots stay untouched
- SAVESTATES/SCREENSHOTS: Avoid ‘video_gpu_screenshot’ with savestates. Allow GPU screenshots with savestates only when there is no other way of getting a screenshot.
- SCREENSHOTS/VULKAN: Unload screenshot widget texture early. Fixes Vulkan crash when closing content while a screenshot widget is still on-screen
- SCREENSHOTS/VULKAN: Fix screenshot widget crash when ticker animating
- WAYLAND: Set correct app ID
- WIIU: Add some missing default directories
- WIIU: Get mkdir working on WiiU (directory creation)
Télécharger RetroArch v1.12.0 (32-bit) (Windows)
Télécharger RetroArch v1.12.0 (64-bit) (Windows)
Télécharger RetroArch v1.12.0 (XP/Vista 32-bit) (Windows)
Télécharger RetroArch v1.12.0 (XP/Vista 64-bit) (Windows)
Télécharger RetroArch v1.12.0 (64-bit) (MacOS)
Télécharger RetroArch v1.12.0 (Metal2) (MacOS)
Télécharger RetroArch v1.12.0 (Linux)
Télécharger RetroArch v1.12.0 (Nintendo GC)
Télécharger RetroArch v1.12.0 (Nintendo Wii)
Télécharger RetroArch v1.12.0 (Nintendo WiiU)
Télécharger RetroArch v1.12.0 (.3dsx) (Nintendo 3DS)
Télécharger RetroArch v1.12.0 (.cia) (Nintendo 3DS)
Télécharger RetroArch v1.12.0 (Nintendo Switch)
Télécharger RetroArch v1.12.0 (PlayStation 2)
Télécharger RetroArch v1.12.0 (PSP)
Télécharger RetroArch v1.12.0 (PS Vita)
Télécharger RetroArch v1.12.0 (Xbox One)
Site Officiel de RetroArch
 
 Messinfo.dat v0.248 (11.37) 
Samedi 15/10/22 à 13:45 par Firebrand
Ce fichier informatif clos le cycle de mises à jour des fichiers additionnels de ProgettoSNAPS pour MAME v0.248. Voici les changements:
- 11.37 10/14/2022: Aligned files to 0.248 version.
Télécharger Messinfo.dat v0.248 (11.37)
Site Officiel de Messinfo.dat
 
 RetroArch v1.11.1 
Mercredi 05/10/22 à 14:36 par Firebrand
Une petite mise à jour a été publiée pour cet ensemble de noyaux d'émulateurs réunis autour d'une même interface. Voici la liste des changements:
- GENERAL: Fix DEFAULT_FILL_TITLE_MACRO
- NETWORKING: Add the const qualifier to some function parameters
- NETWORKING/NETPLAY/UPNP: Add a private or CGNAT address warning to UPnP
- SAVESTATES/SCREENSHOTS: Avoid ‘video_gpu_screenshot’ with savestates
- UWP: Better ‘Save on quit’ fix
Télécharger RetroArch v1.11.1 (32-bit) (Windows)
Télécharger RetroArch v1.11.1 (64-bit) (Windows)
Télécharger RetroArch v1.11.1 (XP/Vista 32-bit) (Windows)
Télécharger RetroArch v1.11.1 (XP/Vista 64-bit) (Windows)
Télécharger RetroArch v1.11.1 (64-bit) (MacOS)
Télécharger RetroArch v1.11.1 (Metal2) (MacOS)
Télécharger RetroArch v1.11.1 (Linux)
Télécharger RetroArch v1.11.1 (Nintendo GC)
Télécharger RetroArch v1.11.1 (Nintendo Wii)
Télécharger RetroArch v1.11.1 (Nintendo WiiU)
Télécharger RetroArch v1.11.1 (.3dsx) (Nintendo 3DS)
Télécharger RetroArch v1.11.1 (.cia) (Nintendo 3DS)
Télécharger RetroArch v1.11.1 (Nintendo Switch)
Télécharger RetroArch v1.11.1 (PlayStation 2)
Télécharger RetroArch v1.11.1 (PSP)
Télécharger RetroArch v1.11.1 (PS Vita)
Télécharger RetroArch v1.11.1 (Xbox One)
Site Officiel de RetroArch
 
 ares v130.1 
Mardi 04/10/22 à 10:11 par Firebrand
Cette mise à jour rapide pour cet émulateur multi-systèmes vient corrigé des bugs apparus dans la précédente version. Voici de qui il s'agit:
This is an emergency hotfix release for macOS and Linux users that fixes the following issues
- N64, PS1 and 32X emulation crashes on Intel macs running macOS versions newer than Catalina. Unfortunately this slipped through the net because it was functional on Catalina, which I have, and the latest macOS on M1, which Rasky has.
- For Linux users, some Audio/Video/Input driver options were missing, due to broken dependency resolution.
- Additionally, one minor emulation fix did get merged: the Copyright screen on Perfect Dark now renders using MAME RDP. (This is not yet fixed when using Parallel-RDP, as we are still working on getting it fixed upstream)
- macOS users on Apple Silicon/ARM64 platforms, and Windows users can safely skip this update if they wish to do so.

Build System
- Fix broken package detection after the switch to pkg-config [LukeUsher]

Nall (Standard Library)
- Fix the recompiler/JIT on Intel macOS platforms newer than Catalina [LukeUsher]

Nintendo 64
- Handle vstart/vend RDP coordinate wraparound when using MAME RDP [Rasky]
Télécharger ares v130.1 (Windows)
Télécharger ares v130.1 (MacOS)
Site Officiel de ares
 
 GameEx et GameEx Arcade Edition v18.28 
Lundi 03/10/22 à 11:46 par Firebrand
Ces frontends multi-systèmes ont été mis à jour, mais les modifications ne sont pas connues.
Télécharger GameEx v18.28 (.NET 6, 64-bit)
Télécharger GameEx v18.28 (32-bit)
Télécharger GameEx Arcade Edition v18.28 (.NET 6, 64-bit)
Télécharger GameEx Arcade Edition v18.28 (32-bit)
Site Officiel de GameEx
 
 RetroArch v1.11.0 
Samedi 01/10/22 à 15:04 par Firebrand
Une nouvelle version de cet ensemble de noyaux d'émulateurs réunis sous une même interface a été publiée. Voici la liste des changements:
Several size optimizations have been made to the packages. We no longer pre-install all of the optional XMB theme packs or other miscellaneous assets. Previously we also shipped autoconfig files that were irrelevant for that specific platform. By excluding these files from the package, we have managed to reduce the filesize and overall amount of files of RetroArch downloads/installs significantly. On consoles this will be very helpful where SD card/FTP installs can tend to be very slow.
If you still want to have all assets, you can go to Online Updater and select ‘Update Assets’. This will install all assets.

Changelog
- 3DS: Add unique ID’s
- 3DS: Add bottom menu options
- 3DS: Set bottom_asset directory default
- 3DS: Only enable internal counter with CONSOLE_LOG defined
- 3DS: Set default bottom font values
- 3DS: Fix CIA installation issues
- 3DS: Support latest libctru
- ANDROID: Add HAVE_ACCESSIBILITY
- ANDROID: Gingerbread support
- ANDROID: Touchpads support
- ANDROID: Builtin Xperia Play autoconfig profile
- ANDROID: Disable Feral GameMode for Android – only available on Linux
- ANDROID: Add a configurable workaround for Android reconnecting devices
- ANDROID/FDROID: Add F-Droid metadata to repo in Fastlane format
- AUDIO/AUDIO MIXER: Add missing locks for thread safety
- AUDIO/AUDIO MIXER: Fix audio mixer memory leak + remove redundant ‘single threaded’ rthreads implementation
- AUTOSAVE: Change/improve exit behavior of autosave thread – if condition variable is signaled, the loop is ran another last time so we can do a final check/save before stopping the thread.
- CDROM: Fix memory leak caught with asan – buf passed to filestream_read_file
- CORE INFO/NETPLAY: Ensure current core info is initialized at runloop_event_init_core when netplay is enabled
- CHEEVOS: Upgrade to rcheevos 10.4
- CHEEVOS: Allow creating auto savestate in hardcore
- CHEEVOS: prevent invalid memory reference if game has achievements but core doesn’t expose memory
- CHEEVOS: Release achievement badge textures when video driver is deinitialized
- CHEEVOS: Re-enforce hardcore limitations once achievements are loaded
- CHEEVOS/MENU/MATERIALUI: Show achievement badge icons in MaterialUI driver
- D3D9: D3D9 has been split up into two drivers – D3D9 HLSL (max compatibility, no shader support yet) and D3D9 Cg (dependent on deprecated Nvidia Cg runtime library)
- D3D9/HLSL/XMB: XMB fix
- D3D9/CG: D3D9 Cg driver fixed
- D3D11: Fix overlay not showing up
- D3D11/12: Reduce lag with WaitForVBlank – this rather simple addition seems to make D3D11/12 very very close to Vulkan/GLCore regarding input lag.
- D3D11/12: Add waitable swapchains and max frame latency option
- D3D11/12: Make waitable swapchains optional
- DATABASE: Reformat ‘rdb_entry_int’ – Nitpick adjustments for database entries: Capitalize “Release Date”, and remove space before : from Release Date rows which use integer
- DATABASE/EXPLORE: Allow On-Demand Thumbnails in Explore menu
- DATABASE/EXPLORE/MENU/OZONE/XMB/RGUI: Explore menu thumbnails
- DISC CONTROL: Better Disc Control append focus
- DOS/DJGPP: Add a workaround for libc bug
- AUTOMATIC FRAME DELAY: Added slowmotion resiliency
- AUTOMATIC FRAME DELAY: Added string representation for seeing the current effective delay without opening statistics
- AUTOMATIC FRAME DELAY: Added “ms” to logging and “(ms)” to label just like in Audio Latency
- GENERAL: Don’t bake in OpenAL and libcaca by default unless explicitly enabled with configure switch.
- GENERAL: Reduce amount of strlen calls
- GENERAL: Reduce or simply sin/cosf calls
- GFX: Fix readability and precision issues in aspectratio_lut
- GFX: Add option to manually enable/disable automatic refresh rate switching
- GFX: Enable automatic configuration of ‘VSync Swap Interval’
- GFX/FONT/FREETYPE: Use FT_New_Memory_Face – first read it from file to memory beforehand –this solves an asset extraction issue when selecting ‘Update Assets’ – apparently FT_New_Face keeps an open file handle to the font file which prevents it from being overwritten/deleted while the program is still running.
- GFX/THUMBNAILS: Thumbnail aspect ratio fix
- GFX/THREADED VIDEO: Optimizations, fixes and cleanups
- GFX/VIDEO FILTERS: Add Upscale_240x160-320×240 video filter with ‘mixed’ method
- GLSLANG: Fix compilation with ./configure –disable-builtinglslang – was missing linking against -lMachineIndependent and -lGenericCodeGen static libs
- INPUT: Fix off by one error for input_block_timeout setting. Also default to 0 for this setting (pretty massive performance gain)
- INPUT: Analog button mapping fixes
- INPUT/HID/OSX: Fix DualShock3 support
- INPUT/HID/LINUX: (qb) Disable HAVE_HID by default for now for Linux as long as there are no working backends for both
- INPUT/HID/WINDOWS: (qb) Disable HAVE_HID by default for now for Windows as long as there are no working backends for both
- INPUT/HID/WIIU: Fix DualShock3 support
- INPUT/OVERLAY: Block pointer input when overlay is pressed
- INPUT/REMAPPING: input_remapping_save_file – existing remapping file was needlessly reloaded
- INPUT/REMAPPING: Add option to disable automatic saving of input remap files
- INPUT/LINUX/UDEV: Fix lightgun scaling on Y axis
- INPUT/LINUX/X11/LED: Add LED keyboard driver
- INPUT/WINDOWS/LED: LED keyboard driver cleanup
- INPUT/WINDOWS/WINRAW: Clear key states when unfocused
- INPUT/WINDOWS/WINRAW: Fix pointer device position
- IOS: iOS app icon fixes & revisions
- LIBRETRO/SAVESTATES: Implement an api call for context awareness
- LOCALIZATION: Updates
- LOCALIZATION: Add Catalan language option
- LOCALIZATION: Fix some bad localization
- LINUX: Make memfd_create call more backwards compatible by calling it through syscall – on older systems, you’ll have to include linux/memfd.h for the MFD_ defines, and call memfd_create() via the the syscall(2) wrapper (and include unistd.h and sys/syscall.h for it work). We exclude linux/memfd.h header include because we already provide the MFD_ defines in case they are missing
- LINUX/MALI FBDEV: Fix assertion failed on video threaded switch
- MENU: Menu paging navigation adjustments
- MENU: New Menu Items for disabling Info & Search buttons in the menu
- MENU: Allow the user to use volume up/down/mute hotkeys from within the menu
- MENU: Add missing sublabels for non-running Quick Menu
- MENU: Reorganize Quick Menu Information
- MENU: Savestate thumbnails – Savestate slot reset action
- MENU: Allow changing savestate slots with left/right on save/load
- MENU: Add ‘Ago’ to playlist last played styles
- MENU: Add proper icons for shader items
- MENU/MATERIALUI: Add icon for ‘Download Thumbnails’
- MENU/XMB: Add options for hiding header and horizontal title margin
- MENU/XMB: Dynamic wallpaper fixes
- MENU/XMB: Add Daite XMB Icon Theme
- MENU/XMB/OZONE: Savestate thumbnail aspect ratio
- MENU/XMB/OZONE: Core option category icon refinements
- MENU/XMB/OZONE: Fullscreen thumbnail browsing
- MENU/XMB/OZONE: Add playlist icons under ‘Load Content’
- MENU/XMB/OZONE: Thumbnail improvements
- MENU/XMB/OZONE: Savestate thumbnail fullscreen + dropdown
- MENU/XMB/OZONE: Prevent unnecessary thumbnail requests when scrolling through playlists
- MENU/OZONE: Fix playlist thumbnail mouse hover after returning from Quick Menu
- MENU/OZONE: Thumbnail visibility corrections
- MENU/OZONE: Playlist metadata reformat
- MENU/OZONE: Savestate thumbnail fixes
- MENU/OZONE: Add savestate thumbnails
- MENU/OZONE: Header icon spacing adjustment
- MENU/RGUI: Savestate thumbnails
- MENU/SETTINGS: Turn Advanced Settings on by default, this entire filtering of settings will need a complete rethink anyways
- MENU/WIDGETS: Widget color + position adjustments
- MIYOO: Exclude unused HAVE_HID for Miyoo
- MIYOO: Enable screenshots
- MIYOO: Enable rewind
- NETWORK: Allow MITM server selection on OK callback
- NETWORK: Replace socket_select calls
- NETWORK: Implement binary network streams
- NETWORK: Poll support
- NETWORK: Check connect errno for successful connection
- NETWORK: Get rid of the timeout_enable parameter for socket_connect
- NETWORK: Fix getnameinfo_retro’s port value for HAVE_SOCKET_LEGACY platforms
- NETWORK: Define inet_ntop and inet_pton for older Windows versions
- NETWORK: Define isinprogress function
- NETWORK/NATT: Move natt files to “network”
- NETWORK/NETWORK STREAMS: Add function netstream_eof
- NETWORK/NETPLAY: Fix game CRC parsing
- NETWORK/NETPLAY: Disable and hide stateless mode
- NETWORK/NETPLAY: Change default for input sharing to “no sharing”
- NETWORK/NETPLAY: Enforce a timeout during connection
- NETWORK/NETPLAY: Disallow clients from loading states and resetting
- NETWORK/NETPLAY: Special saves directory for client
- NETWORK/NETPLAY: Ensure current content is reloaded before joining a host
- NETWORK/NETPLAY: Fix client info devices index
- NETWORK/NETPLAY: Fix input for some cores when hosting
- NETWORK/NETPLAY: Memory leak fixes
- NETWORK/NETPLAY: Force a core update when starting netplay
- NETWORK/NETPLAY: Fix NAT traversal announce for HAVE_SOCKET_LEGACY platforms
- NETWORK/NETPLAY: Refactor fork arguments
- NETWORK/NETPLAY: Fix content reload deadlocks on static core platforms
- NETWORK/NETPLAY: Disallow netplay start when content is not loaded for static core platforms
- NETWORK/NETPLAY: Show client slowdown information
- NETWORK/NETPLAY: Improve check frames menu entry
- NETWORK/NETPLAY: Do not try to receive new data if the data is in the buffer
- NETWORK/NETPLAY: Copy data on receive, even if the buffer is full
- NETWORK/NETPLAY: Fix lobby sublabel CRC display on some platforms
- NETWORK/NETPLAY: Support for customizing chat colors
- NETWORK/NETPLAY: Small launch compatibility patch adjustments
- NETWORK/NETPLAY: Support for banning clients
- NETWORK/NETPLAY: Minor tweaks to the find content task
- NETWORK/NETPLAY: Support for gathering client info and kicking
- NETWORK/NETPLAY: Fix possible deadlock
- NETWORK/NETPLAY: Initialize client’s allow_pausing to true
- NETWORK/NETPLAY: Disable netplay for unsupported cores – with stateless mode being disabled for now, there is no reason not to include this. Refuse to initialize netplay when the current core is not supported (no proper savestates support)
- NETWORK/NETPLAY/DISCOVERY: Ensure fixed width ints on packet struct
- NETWORK/NETPLAY/DISCOVERY: Support for IPv4 tunneling (6to4)
- NETWORK/NETPLAY/DISCOVERY/TASKS: Netplay/LAN Discovery Task refactor – aims to prevent blocking the main thread while awaiting for the LAN discovery timeout; This is accomplished by moving the whole discovery functionality into its task and using a non-blocking timer to finish the task. Also fixes discovery sockets not being made non-blocking, which could cause the main thread to hang for very long periods of time every pre-frame.
- NETWORK/NETPLAY/TASKS: Find content task refactor – fixes many issues along the way, including a couple of nasty memory leaks that would leak thousands of bytes each time the task ran. It also expands the original concept by matching currently run content by filename (CRC matching is always performed first though).
- NETWORK/NETPLAY/TASKS: Find content task refactor – Ensure CRC32 is 8 characters long
- NETWORK/NETPLAY/LOBBY: Add setting for filtering out rooms with non-installed cores
- NETWORK/NETPLAY/LOBBY: Hide older (incompatible) rooms
- NETWORK/NETPLAY/LOBBY: Add a toggleable filter for passworded rooms. In addition, move lobby filters into its own submenu for better organization.
- NETWORK/NETPLAY/MENU: Chat supported info for the host kick submenu
- NETWORK/NETPLAY/MENU: Localize relay servers
- NETWORK/NETPLAY/MENU: Host Ban Submenu
- NETWORK/NETPLAY/MENU: Add client devices info to the kick sub-menu
- NETWORK/NETPLAY/MENU: Path: Netplay -> Host -> Kick Client – Allows the host to kick clients. Allows the host to view client information: connected clients (names), status (playing/spectating) and ping.
- NETWORK/NETPLAY/VITA: Add net_ifinfo support
- NETWORK/NETPLAY/VITA: Enable partial LAN discovery
- NETWORK/NETPLAY/VITA: Change default UDP port to 19492
- NETWORK/NETPLAY/VITA: Do not multiply negative timeout values
- NETWORK/NETPLAY/VITA: Fix epoll’s timeout parameter
- NETWORK/NETPLAY/VITA: Launch compatibility patch
- NETWORK/NETPLAY/3DS: Launch compatibility patch
- NETWORK/NETPLAY/3DS: Adapt POLL for 3DS platform
- NETWORK/NETPLAY/PS3: Launch compatibility patch
- NETWORK/NETPLAY/WII: Enable net_ifinfo for some features. In practice, this only allows the netplay’s UPnP task to succeed on the Wii.
- NETWORK/NETPLAY/WIIU: Launch compatibility patch
- NETWORK/NETPLAY/SWITCH: Launch compatibility patch
- NETWORK/UPNP: Attempt support for remaining platforms
- NETWORK/UPNP: Support for IPv4 tunneling
- ODROID GO2: Increase DEFAULT_MAX_PADS to 8 for ODROIDGO2, since that impacts the RG351[X] consoles. The RG351[X] have a USB host controller and can have an arbitrary number of USB gamepads.
- ONLINE UPDATER: Online Updater menu reorganizing
- OSX: Fixed items of system top menu bar on macOS
- OSX: Revision to macOS app icon set
- PLAYLISTS: Ensure history list will contain CRC32
- PLAYLISTS: Fix CRC32 comparison – as state->content_crc has “|crc” suffix.
- PS4/ORBIS: Orbis/PS4 Support using OrbisDev toolchain
- PS4/ORBIS: Update xxHash dependency
- PS4/ORBIS: Shader cache
- RETROFW: Exclude unused HAVE_HID for RetroFW
- RETROFW: Support battery indicator on RetroFW
- RETROFW: Enable menu toggle button on retrofw devices
- SHADERS: Shader Preset Loading of Multiple additional #references lines for settings
- SHADERS: Shader Load Extra Parameter Reference Files – this adds the ability to put additional #reference lines inside shader presets which will load additional settings. The first reference in the preset still needs to point at a chain of presets which ends with a shader chain, and subsequent #reference lines will load presets which only have parameter values adjustment. This allows presets to be made with a modular selection of settings. For example with the Mega Bezel one additional reference could point at a preset which contained settings for Night mode vs Day mode, and another reference could point to a preset which contained settings for how much the screen should be zoomed in.
- SHADERS/MENU: Increase shader scale max value
- SCANNER/DC: Fix Redump bin/cue scan for some DC games
- SCANNER/GC/WII: Add RVZ/WIA scan support for GC/Wii
- SCANNER/PS1: Improved success rate of Serial scanning on PS1 by adding support for the xx.xxx format
- SCANNER/PS1: Changed return value of detect_ps1_game function to actually return a failure when the Serial couldn’t be extracted. Scanner will then fallback on crc check, and usually ends up finding the games in the database.
- SWITCH: Enable RWAV (WAV audio file) support
- STRING: Do not assume char is unsigned
- TASKS: More thread-awareness in task callbacks
- TASKS: Fix race condition at task_queue_wait
- TVOS: Revised tvOS icons w/ updated alien.
- VFS: Fix various VFS / file stream issues
- VULKAN: Fix more validation errors
- VULKAN: Attempt to fix validation errors with HDR swapchain. Always use final render pass type equal to swapchain format. Use more direct logic to expose if filter chain emits HDR10 color space or not
- VULKAN/ANDROID: Honor SUBOPTIMAL on non-Android since you’d want to recreate swapchains then. On Android it can be promoted to SUCCESS.
- SUBOPTIMAL_KHR can happen there when rotation (pre-rotate) is wrong.
- VULKAN/DEBUG: Automatically mark buffer/images/memory with names
- VULKAN/DEBUG: Move over to VK_EXT_debug_utils. Debug marker is deprecated years ago.
- VULKAN/HDR: Fix leak of HDR UBO buffer
- VULKAN/BFI: Fix BFI (Black Frame Insertion) regression
- WINDOWS: Fix exclusive fullscreen video refresh rate when vsync swap interval is not equal to one – refresh rate in exclusive fullscreen mode was being incorrectly multiplied by vsync swap interval, breaking swap interval functionality at the gfx driver level
- WIN32: Do optimization for Windows where we only update the title with SetWindowText when the previous title differs from the current title
- WIN32: Skip console attach when logging to file
- WIN32: Remove black margins with borderless non-fullscreen window
- WIN32/TASKBAR: Release ITaskbarList3 on failed HrInit – pointer wasn’t NULL’d, thus set_window_progress would cause weird behavior
- WII/GX: Fix potential datarace
- WIIU: Implement sysconf and __clear_cache
- WIIU: Add OS memory mapping imports
- UWP: Added launch protocol arg ‘forceExit’ so a frontend can tell an already-running RetroArch UWP instance to quit.
- UWP: Enable core downloader/updater
- UWP: Remove copy permissions as its inefficient as we can just directly assign the new ACL and that works
- Xbox/UWP: Remove expandedResources
- Xbox/UWP: UWP OnSuspending crash fix
- Xbox/UWP: Enable savestate file compression by default for UWP/Xbox – got told there are no more issues with it
- Xbox/UWP: Add support for 4k to angle on xbox for MSVC2017 build
Télécharger RetroArch v1.11.0 (32-bit) (Windows)
Télécharger RetroArch v1.11.0 (64-bit) (Windows)
Télécharger RetroArch v1.11.0 (64-bit) (MacOS)
Télécharger RetroArch v1.11.0 (Metal2) (MacOS)
Télécharger RetroArch v1.11.0 (Linux)
Télécharger RetroArch v1.11.0 (Nintendo GC)
Télécharger RetroArch v1.11.0 (Nintendo Wii)
Télécharger RetroArch v1.11.0 (Nintendo WiiU)
Télécharger RetroArch v1.11.0 (.3dsx) (Nintendo 3DS)
Télécharger RetroArch v1.11.0 (.cia) (Nintendo 3DS)
Télécharger RetroArch v1.11.0 (Nintendo Switch)
Télécharger RetroArch v1.11.0 (PlayStation 2)
Télécharger RetroArch v1.11.0 (PSP)
Télécharger RetroArch v1.11.0 (PS Vita)
Télécharger RetroArch v1.11.0 (Xbox One)
Site Officiel de RetroArch
 
 ares v130 
Samedi 01/10/22 à 14:45 par Firebrand
Cet émulateur multi-systèmes a été mis à jour. Les améliorations sont les suivantes:
User Interface
- Simplify the codebase by removing the ability to disable emulation cores or ungroup them from the gui [Luke Usher]
- Log status messages to console in addition to the status bar [Rasky]
- Sort systems in the system list alphabetically by vendor [Luke Usher]
- Document command line options via --help parameter [Raphnet]
- Rename "Vulkan" to "GPU acceleration" [Rasky]
- Allow hotkeys to be used even when the window is unfocused,provided "allow input when focus is lost" is enabled [Luke Usher]
- Added entitlements to allow JIT when running as a signed application on macOS [Rasky]
- Bundle libMoldenVK on macOS [Rasky]
- Fix auto-detection of Famicom Disk System games when dragging/dropping [remutro]
- Prevent polling host input at too-high intervals, reduces lag when games rapidly poll input registers [Luke Usher]

Build System
- Detect incompatibile, outdated gcc versions [Rasky]
- Enable link-time optimization by default, giving a performance boost for most users [Luke Usher]
- Build as a Universal Application on macOS, allowing the same binary to run native on Intel and Apple Silicon [Rasky]
- Detect when gcc is actually an alias for clang [Invertego]
- Fix compiler warnings with newer versions of clang [Invertego]
- Use pkg-config to detect dependencies of Ruby [Tobias Jakobi]
- Switch exclusively to clang for Windows releases and nightly builds [Luke Usher]
- Allow cross-compilation on macOS [Rasky]
- Add support for compiling using ccache [Luke Usher]

Nall (Standard Library / Runtime)
- Improve make_string to pass by reference [Invertego]
- Fix memory issues in assignment operators for nall types [Invertego]
- Fix new//delete mismatch in hashset [Invertego]
- Make the Posix implementation of thread::join idempotent [Invertego]

Ruby (Video / Audio / Input driver layer)
- Remove DirectDraw rendering backend, this has been deprecated since DirectX 7 [Luke Usher]
- Fix swap interval on systems that require the use of glXSwapIntervalEXT [Luke Usher]
- Workaround double-mouse events with xlib [Raphnet]

Atari 2600
- Fix a buffer-overflow crash condition [Invertego]
- Increase scale factor for screen size consistency with other cores [Luke Usher]

Sega Master System / Game Gear
- Add support for Sega Mega Drive controllers (Mega Mouse, Sports Pad, 3-button/6-button) [Raphnet]
- Add support for the Sports Pad controller [Raphnet]
- Add support for the Paddle controller [Raphnet]
- Expose output signals to controller port [Raphnet]
- Prevent Game Gear running in 50hz mode as a 50hz Game Gear was never manufactured [Luke Usher]
- Add support for running the Game Gear bios (Optional) [Luke Usher]
- Fix writes to controller port 2 [Raphnet]
- Fix port $3e and $3f operation on Game Gear [Luke Usher]
- Implement support for NTSC-U and NTSC-J Game Gear models [Luke Usher]
- Initialize ram to zero (fixes titles that break when a bios is not loaded) [Luke Usher]
- Fix incorrect hcounter calculation [Luke Usher]
- Various minor VDP emulation improvements [Luke Usher]
- Fix a crash when running the Game Gear in Master System Mode [Luke Usher]
- Fix two more Game Gear games that require Master System Mode: Taito Chase H.Q (Japan) and Chase H.Q (USA) [Luke Usher]

Sega Mega Drive
- Add eeprom support for Wonder Boy V (J) [TascoDLX]
- Fix SRAM support for Psy-O-Blade [FitzRoyX]
- Add support for the Mega Mouse [Raphnet]
- Fix incorrect aspect ratio (32:35) [Luke Usher]
- Simplify cartridge emulation by combining standard and banked mappers [TascoDLX]
- Latch Z80 bus-request on reset [Invertego]
- Preserve Z80 bank register on reset [Invertego]
- Implement custom mappers for Triple Play 96 & Triple Play Gold [TascoDLX]

Sega 32X
- Implement support for the standard SEGA/SSF2 mapper [Ralakimus]
- Fix eeprom support [Invertego]
- Ensure unused bits of the adapter control register are set to zzero [TascoDLX]
- Expose cartidge SRAM through the 0x900000 range [Invertego]
- Improve synchronization between the main/sub SH-2 processors [Invertego]
- Unify sync timing between interpreter and recompiler [Invertego]
- Ensure upper bits of the interrupt control register return zero [Luke Usher]
- Fix an issue where games would render garbage to the top/bottom border areas [Luke Usher]
- Fix an issue that prevented Sega CD32X games from detecting the 32X add-on [Invertego]
- Implement proper 32x reset behavior [Luke Usher]

Nintendo NES / Famicom
- Implement (partial) support for iNES 2.0 format roms [Luke Usher]
- Fix an issue where GTROM had 8k CHR-RAM instead of the correct 16k [Luke Usher]

Nintendo SNES / Super Famicom
- Fix an issue with performance-ppu selection [Intertego]
- Fix a typo that lead to broken background layer 4 in Pixel Accuracy mode [FitzRoyX]
- Fix auto-detection of MSU-1 games [Luke Usher]

Nintendo Game Boy / Game Boy Color
- Allow Game Boy Color to run in DMG mode [Luke Usher]
- Implement display disable while stopped [Luke Usher]
- Prevent incrementing DIV counter when stopped [Luke Usher]
- Fix a minor 'oops' in KEY0 [Luke Usher]
- Fix DIV initial value [Luke Usher]
- Various fixes to MBC2 mapper [Luke Usher]
- Implement bgEnable differences between DMG and CGB [Luke Usher]

Nintendo Game Boy Advance
- Fix games using EEPROM saving [Luke Usher]

Nintendo 64
- Implement Nintendo 64DD emulation [Luigiblood]
- Use MoltenVK to support Parallel-RDP on macOS via Metal [Rasky]
- Use sse2neon to enable vectorization on Apple Silicon, boosting performance [Rasky]
- Use XXH3 instead of crc32 for RSP recompiler cache, boosting performance [Luke Usher]
- Implement overflow exceptions in TRUNC [Rasky]
- Add setting to disable VI post-processing/blur [Parashoe]
- Add missing variables to RDP serialization [sp1187]
- Implement support for RDP crashes [Rasky]
- Improve support for FPU exceptions [Rasky]
- Improve COP1/COP2 invalid instruction exceptions [Rasky]
- Split the RSP recompiler cache into 256-byte chunks, improving performance [Luke Usher]
- Rewrite VI resolution scaling [Rasky]
- Use a native data type (u16) for RSP Program Counter, improving performance [Luke Usher]
- Fix AI DMA enable bit handling [Rasky]
- Fix AI IRQ [Rasky]
- Fix an issue where the recompiler would invalidate incorrect ranges [Luke Usher]
- Fix buffer overflows in MAME RDP [Rasky]
- Fix Control Stick dead zone scaling [kev4cards]
- Fix numerical instability in Gamepad reading logic [Invertego]
- Fix support for interlaced resolutions [Rasky]
- Leave PIF RAM as-is when no data was received [Raphnet]
- Fix when "Nothing" is selected as a controller type [Raphnet]
- Implement precise RDP block invalidation [Invertego]
- Refactor AI emulation to always return audio samples [Rasky]
- Fix a bug in update of DP_START during a RDP DMA transfer [Rasky]

Microsoft MSX
- Implement the Arkanoid Vaus paddle controller [Raphnet]
- Implement controller port 2 [Raphnet]
- Fix detection of the R-Type specific vs generic ASC16 ROM mapper [Luke Usher]
- Add database entry for Batman (Japan) [Luke Usher]

SNK Neo Geo
- Improve performance by reducing unnecessary synchronization [Luke Usher]
- Fix a crash caused by not clearing the screen thread on unload [Invertego]
- Fix outer-edge rendering issues by clipping overscan [Luke Usher]
- Fix FM/SSG audio pkayback [Luke Usher]
- Fix support for games with non-power-of-two sized CROMs [Luke Usher]
- Fix loading of roms that use .ep program roms instead of .p program roms [Luke Usher]
- Fix incorrect sprite offset: they are relative to top-border rather than line 0 [Luke Usher]
- Implement preliminary support for ADPCM-A audio [Luke Usher]
- Implement preliminary support for ADPCM-B audio [Luke Usher]

Sony PlayStation
- Increase precision fo volume input during amplification [Luke Usher]
- Add simple idle loop detection, slight performance boost [Luke Usher]
- Clamp f32->u8 colour conversions [Invertego]
- Fix a crash when rendering using out-of-range vram co-ordinates [Luke Usher]
- Fix broken input in most (but not all) games [Luke Usher]
- Implement disc command GetParam [remutro]

Component Improvements
Changes to these components are not specific to cores/systems, but rather they impact all systems that use the updated component.
- CPU: MOS 6502: Add support for many more unofficial/undocumented instructions, however, we are still missing some of the lesser used ones [Luke Usher]
- CPU: Motorola 68000:
*Fix divs/divu negative flag [Invertego]
*Fix memory read order for A/SBCD and ADD/SUBX [Invertego]
- CPU: Hitatchi SH-2:
*Fix serial communication [TascoDLX]
*Synchronize on uncached writes [Invertego]
*Fix broken Illegal Instruction debug output [Luke Usher]
*Fix PC-relative addressing in branch delay slots [Invertego]
*Add preliminary emulation of the SH6704 internal bus [Invertego]
*Fix an issue where the incorrect return address was stored in an exception frame [Invertego]
- CPU: Nec V30MZ: Fix shift behavior [Invertego]
- CPU: Zilog Z80:
*Fix timings for RET, LD (IX+d),n & LD (IY+d),n [TascoDLX]
*Fix extended/prefixed instruction timing and behavior [TascoDLX]
*Fix IM0 and simplify IRQ implementation [Luke Usher]
*Fix various other instruction timings [TascoDLX]
*Fix reset logic [TascoDLX]
- Audio: YM2612:
*Fix pm vibrato effect [TascoDLX]
*Fix envelope update logic [TascoDLX]
*Fix volume floor [TascoDLX]
*Various other improvements and fixes [TascoDLX]
- Audio: AY38910: Keep a copy of the last data written to IO ports [Raphnet]
- Audio: SN76489: Fix additional data writes to noise channel [Luke Usher]
Télécharger ares v130 (Windows)
Télécharger ares v130 (MacOS)
Site Officiel de ares
 
<< Page précédentePage suivante >>