Filtrer par machine :
Type de vue :
 RomCenter v4.1.1 
Jeudi 31/12/20 à 12:54 par Firebrand
Cette nouvelle version de ce gestionnaire de ROMs corrige principalement des bugs. Voici la liste des changements:
This is a bug fix release. It also includes a command line version of romcenter.
Here are the main changes:
- Fix error when backup path is not defined.
- Fix region order not saved
- Fix temp folder not found
- Fix tosec filter
- Add command line version (rc.exe). Support db creation, update, adding rom paths and fixing.
- Improve data Grid grouping
- Improve tosec parser log
- Improve tosec year/region parser
- Upgrade data grid component
Télécharger RomCenter v4.1.1
Site Officiel de RomCenter
 MESS et MESSUI v0.227 (64-bit) 
Jeudi 31/12/20 à 12:46 par Firebrand
Ces versions de MAME dépourvu des machines arcade comportent désormais les améliorations de MAME v0.227 mais aussi leur nouveautés propres partagées avec MAMEUI:
Changes (all)
- Fixed bug where invalid slots could get into the ini file.

Changes (MESSUI and MAMEUI)
- Added splash screen
- Can specify multiple icon directories
- Main audit results window is larger
- After doing F5, can sort on Roms or Samples column
- In the Game Properties, enabled all controls, even when they are not relevant
- Removed Debug tab and controls
- Removed verbose.log
- If game started with debugger enabled, it is turned off
- Fixed a bug with setting up software paths
- On Display tab, added Integer scaling options
- On Screen tab, fixed size/refresh options on the default screen
- On Sound tab, added Port Audio Latency
- Added new OpenGL/BGFX tab, and various associated settings
- Added new OpenGL Shaders tab and up to 4 shaders of each kind. Shaders are to be saved in the HLSL folder.
- Added new Snap/Input/Output tab and associated settings
- Added new LUA tab, with various settings and plugin controls
- On Miscellaneous tab, replaced old artwork controls with new ones. Added 6 various extra settings.
- On Controller Mapping tab, added 6 provider dropdowns
- In the Tree, you can right-click on Horizontal, Vertical, Computer, Console, Raster or Vector, select Properties and modify the settings.
- Removed Reset buttons. Once you hit Apply or OK settings are saved.
- Fixed bios selection that could corrupt ini files
- On messui, fixed splitter that caused software area to become narrower over time.
- Interface options - restored Snapshot Pattern option, added Skip Game Warnings setting.
Télécharger MESS v0.227 (64-bit)
Télécharger MESSUI v0.227 (64-bit)
Site Officiel de MESS
 Hatari v2.3.1 
Lundi 28/12/20 à 13:02 par Firebrand
Cet émulateur Atari ST a été mis à jour. Les améliorations sont les suivantes:
Following features are deprecated and will be removed in a future release:
- Support for the SDL 1.2 library (i.e. SDL 2.x should be used instead)
- SDL 2.x "bUseSdlRenderer" config and "GPU scaling" GUI options (after HW support for SDL2 is available widely enough)
- The old UAE CPU core (i.e. the new WinUAE CPU core should be used instead)
- Python v2 support in Python scripts (Python 2 was end of life in 2020)
- The "external" disassembler (i.e. use "--disasm uae" instead)
- Hatari XBios(255) API enabled with the "--bios-intercept" option (i.e. use "--natfeats" & "--cmd-fifo" options and "hconsole" instead)
- The old ~/.hatari configuration file location (use ~/.config/hatari instead)

- CPU:
*Fix: unneeded extra prefetch for movem in 68020/30 cpu (regression in v2.3)
- DSP:
*Fix: master clock use for crossbar/DSP Handshake mode (partial regression in v1.6)
*Fix: hostport PORTB interrupt handling

- ACSI/IDE/SCSI handling:
*Fix: IDE crash when switching to Falcon mode at run-time (regression in v2.3)
*Fix: No error dialog on IDE image mount errors
*Fix: Duplicate disk image mount failure handling
- TOS support:
*Fix: TOS 2.07 (Sparrow TOS) support (regression in v2.3)
- Hatari window handling:
*Fix: Hatari window disappearing from Python UI when Hatari changes its framebuffer size (SDL2 specific)
- macOS GUI:
*Fix: FPU setting doesn't work when GUI runs in French

Python UI:
- Several fixes (see its own release-notes.txt)
- Requires now Gtk v3.22 or newer

- Fix: assert in hatari_profile (profile post-processor) with relative symbols

- Add PortMidi info to devices dialog section in manual
- Updated compatibility documentation

Fixed Falcon programs:
- Music missing in H2O game, in Running game main screen, Stocasto demo and Epidemic music disk (crossbar/DSP handshake mode)
- Lockup demo freezing at startup (DSP hostport PORTB interrupt handling)
- Several demos (Cruor 96k, Hmmm..., Keff, Payback 2015) and games (Beats of Rage, Capy, Confusion preview 2, Men at War preview, Moonspeeder preview 2, Neurobot, Pacmania X68000, Slippery Sam and Sokoban by Fun) not starting with TOS4 or EmuTOS unless MMU was enabled (unneeded extra prefetch in movem)
- Built-in Obsolescence demo, Delmpaint app and Sidetracked GFA musicdisk had other issues also with MMU under TOS4 or EmuTOS (unneeded extra prefetch in movem)
Télécharger Hatari v2.3.1 (32-bit) (Windows)
Télécharger Hatari v2.3.1 (64-bit) (Windows)
Télécharger Hatari v2.3.1 (MacOS)
Télécharger Hatari v2.3.1 (Linux)
Site Officiel de Hatari
 RomVault v3.2.1 
Samedi 26/12/20 à 13:33 par Firebrand
Ce gestionnaire de ROMs a été mis à jour. Les améliorations sont les suivantes:
- RomVault will no longer overwrite unknown (unscanned) files while fixing
- .7z caching does not make multiple cache files any more, and cache fixing .7z files in ToSort now works.
- Full report crash bug fixed
- Dats containing zero files now show as green.
Télécharger RomVault v3.2.1
Site Officiel de RomVault
 Steem SSE v4.0.2 R26 
Mercredi 23/12/20 à 13:29 par Firebrand
Deux nouvelles versions de cet émulateur Atari ST ont été publiées. Voici les changements apportés:
- Fix save screenshot to file when freeimage.dll loaded

- Fix crash on Disk manager 'Get contents' of a unrecognised, non-archive file
Télécharger Steem SSE v4.0.2 R26 (32-bit)
Télécharger Steem SSE v4.0.2 R26 (64-bit)
Site Officiel de Steem SSE
 ClrMAME Pro v4.039a 
Dimanche 20/12/20 à 13:50 par Firebrand
Ce gestionnaire de ROMs a été mis à jour, mais les changements n'ont pas été précisés. Probablement des corrections de bugs.
Télécharger ClrMAME Pro v4.039a (32-bit)
Télécharger ClrMAME Pro v4.039a (64-bit)
Site Officiel de ClrMAME Pro
 GameEx et GameEx Arcade Edition v16.74 
Jeudi 17/12/20 à 12:38 par Firebrand
Ces frontends multi-systèmes ont été mis à jour, mais pour ne pas changer les modifications sont inconnues.
Télécharger GameEx v16.74
Télécharger GameEx Arcade Edition v16.74
Site Officiel de GameEx
 ClrMAME Pro v4.039 
Lundi 14/12/20 à 14:01 par Firebrand
Ce gestionnaire de ROMs a été mis à jour. Les améliorations sont les suivantes:
- fixed: www profiler, don't truncate protocol from page url, so you can use http or https (however you need to update your settings once)
- fixed: www profiler shows downloaded and updated dats still as update
- fixed: don't prompt user that the download was ok when www profiler loaded a decompressed dat
- fixed: downloaded and not moved decompressed dats get removed when closing cmpro
- fixed: some sets don't get marked as unneeded or weird renames are proposed in mame/software list combined mode only
- fixed: parent/clone relationship of software list roms got lost under some circumstance
- fixed: 32k pathlength support doesn't work for profiles/datfiles
- fixed: fixing a wrong sysdefpath issue only worked when you got "ask before fixing" enabled
- fixed: xml parser fails on xml files with
- fixed: falsely trim "." characters at the end of filenames
- fixed: falesly check 'marked disabled sets as unneeded' sets for wrong names
- fixed: falsely hide missing bios roms in bios sets when separate bios sets is disabled
- fixed: falsely skip rebuilding bios roms in bios sets when separate bios sets is disabled
- fixed: falsely load not updated profiler cache after delete profile operations
- fixed: 32k path support failed for paths which are exactly MAX_PATH long
- fixed: scanner font selection isn't applied/saved when you use the default font (blank name)
- fixed: misleading wrong merged messages when using regions/languages
- misc: www profiler, allow redownload of local datfiles
misc: use UTC based time/date for date/time fixing
- misc: allow odd second values (MS DOS times are over)
- misc: allow yyyymmddTHHMMSS as date/timestamp in dat
- misc: www profiler can handle urls which provide filenames by content-disposition header information
- misc: updated rar ddl
- added: %L=1/0 option for set-info select sets to enable/disble sets which reference software lists
- added: show number of selected profiles/datfiles in profiler window title
Télécharger ClrMAME Pro v4.039 (32-bit)
Télécharger ClrMAME Pro v4.039 (64-bit)
Site Officiel de ClrMAME Pro
 Steem SSE v4.0.2 R24 
Jeudi 10/12/20 à 13:31 par Firebrand
Cet émulateur Atari ST a été mis à jour. Les améliorations sont les suivantes:
- (re)Fix PRG/TOS support STF
- Debugger (re)fix crash on config change
- Fix save screenshot to clipboard when freeimage.dll loaded (D3D)
- 6301 random mouse state on reboot
- Faster rendering in medium resolution (32bit)
- Fix overscan, no border corruption
- Green disk manager
Télécharger Steem SSE v4.0.2 R24 (32-bit)
Télécharger Steem SSE v4.0.2 R24 (64-bit)
Site Officiel de Steem SSE
 Romulus v0.049 
Dimanche 06/12/20 à 13:29 par Firebrand
Une nouvelle version de ce gestionnaire des ROMs a été publiée. Un seul changement est à noter:
- FIXED Updater list extraction information.
Télécharger Romulus v0.049
Site Officiel de Romulus
 uCON64 v2.2.1 
Lundi 30/11/20 à 13:46 par Firebrand
Cet utilitaire qui ne servira pas à tout le monde puisqu'il permet de dialoguer avec les copieurs de cartouches et de gérer sa collection de ROMs, a été mis à jour. Les améliorations sont les suviantes:
- updated (SNES) fixed checksum calculation of SNES/Super Famicom Classic Mini SRAM data of special chip games like Super Mario RPG, Super Mario World 2 - Yoshi's Island, Hoshi no Kirby Super Deluxe and Star Fox 2 (by dbjh)
- added (SNES) --range=OFFSET1:OFFSET2 specify range for calculating checksum of SNES/Super Famicom Classic Mini (hakchi2) SRAM data. Can be used in combination with --sminis for special chip games (by dbjh)
- added (SNES) --xic2 send ROM to SMC IC2 compatible backup unit (by dbjh; thanks to Mystic_Merlin for finding this out and for testing)
- removed (PSX/N64) --xdex, because the underlying code had nothing to do with the DexDrive (by dbjh)
- added full MinGW-w64, 64-bit Visual C++ (2015 & 2019) and 64-bit Cygwin build support (including libdiscmage and libcd64); improved 64-bit support in general (by dbjh)
- libdiscmage support is no longer enabled by default. Use the configure option --with-libdiscmage to enable support (by dbjh)
Télécharger uCON64 v2.2.1 (Windows)
Télécharger uCON64 v2.2.1 (Dos)
Télécharger uCON64 v2.2.1 (Linux)
Site Officiel de uCON64
 Hatari v2.3.0 
Lundi 30/11/20 à 13:30 par Firebrand
Cet émulateur Atari ST a été mis à jour. Les améliorations sont les suivantes:
Following features are deprecated and will be removed in a future release:
- Support for the SDL 1.2 library (i.e. SDL 2.x should be used instead)
- SDL 2.x "bUseSdlRenderer" config and "GPU scaling" GUI options (after HW support for SDL2 is available widely enough)
- The old UAE CPU core (i.e. the new WinUAE CPU core should be used instead)
- Python v2 support in Python scripts (Python 2 was end of life in 2020)
- The "external" disassembler (i.e. use "--disasm uae" instead)
- Hatari XBios(255) API enabled with the "--bios-intercept" option(i.e. use "--natfeats" & "--cmd-fifo" options and "hconsole" instead)
- The old ~/.hatari configuration file location (use ~/.config/hatari instead)

- FDC / Disk :
*Support for MegaSTE DIP switch register $FF9200 (set floppy drive to HD by default on MegaSTE/TT/Falcon)
*support for DD/HD mode on MegaSTE at $FF860E (when FDC is set to HD mode, reading DD floppies will fail)
*Support for the 'Disk Change' (DC) signal on TT machines on TT's MFP GPIP4
*Fix: IDE disks with sector size > 512 bytes
*Fix: IDE controller is now always available in Falcon mode, even if no hard disks have been configured.
- CPU:
*Update CPU core to latest WinUAE 4.4.0 beta : full support for undocument fields in 68000 bus/address error stack frames, as well as CCR flags for
most of the 680x0 instructions (using a cpu tester program on the real hardware that checks all possible opcodes' combinations)
*68030 MMU hardware bus error support + various fixes
*FPU fixes
- Video:
*Improved timing when setting Vsync signal (same place where video counter is reloaded)
*Handle screen where vertical DE signal is completely disabled
*Better start/end position for the VBlank signal at 50Hz and 60Hz
- Sound:
*Add a better filter for downsampling the internal 250 kHz signal, should
give better results when the YM2149 outputs high frequency sounds
*Fix microwire mask shifting when CPU runs > 8 MHz
- MFP :
*Rewrite MFP code to handle several MFP objects and add support for the TT's 2nd MFP (not all TT's MFP signals are emulated yet)
*Improved Falcon's DMA sound interrupt on GPIP7 and AER
- Blitter:
*Large rewrite of the blitter's core, improving cycle accuracy and handling the complex cases where xcount=1 and nfsr=1. Code is slighlty smaller and closer to the logic of the real hardware
*Handle restart in non HOG mode when the CPU uses a RMW instruction (eg TAS)
*Improve access to memory regions that would generate a bus error for the CPU
- Emulate additional RTC/NVRAM registers
- megaSTE should start at 8 MHz, not 16 MHz

- Miscellaneous:
*Fix: freeze at Hatari exit and RS-232 device file changes, when device file(s) are FIFO(s)
*Fix: when autostarting programs without pre-existing INF file, enable blitter also with EmuTOS
*Use floppy track's size in bytes to detect DD/HD/ED (instead of counting sectors)
*Add --lilo debug option for more convenient m68k Linux loading
- Config file handling:
*Support config file values with '=' in them
*Skip reading global config file if HATARI_TEST environment variable is set
- Memory handling:
*Memory snapshot version increase due to FDC changes (i.e. old snapshots won't work with new version)
*Accept 10MB as valid ST-RAM amount (max on real MegaSTE/TT machines) and correct invalid Falcon ST-RAM amounts
*Fix: 24-bit address mode change while emulation is running (triggered e.g. when TT-RAM is enabled for TT)
- HD images:
*Fix: run-time IDE byte swap change requires IDE re-init
*Fix: TOS booting from A: although SCSI drive was enabled
*Support read-only HD image files, and show error dialogs for image file open/lock issues
- GEMDOS HD emulation:
*Support FASTLOAD program flag with GEMDOS HD
*GEMDOS HD emulation cartridge assembly functionality is moved almost completely to emulator side. Fixes Atari side error handling when program file is not readable, and TOS stack overflows in some rare cases
*Detect DTA re-use to reduce DTA cache usage, grow cache on demand and give warning if its entries need to be re-cycled (= cache max size is reached)
*Invalid DTA in Fsnext() return -ENMFIL, like TOS does
*Fix: skip non-existing host files on FSnext() instead of returning an error (latter broke directory listings)
*Fix: Dsetpath/Dgetpath empty path handling
- Hatari graphics support:
*Low/med-rez line doubling uses less CPU and doubled lines in "TV" display mode are now drawn at half intensity, not as black (fixes TV mode being too dark)
*SDL2: "--zoom" option accepts any values between 1.0 - 8.0
*SDL2: "--zoom" option is changed to always enable low resolution doubling before SDL framebuffer is scaled up (or down) by the zoom factor. This way Hatari output window is approximately same sized regardless of emulated Atari resolution, like on a real CRT monitor
*SDL2: scale quality is selected automatically; nearest pixel for sharp output with integer scaling factors, and linear scaling to smooth out issues with non-integer scaling and window resizes
*SDL2: Now redundant "nRenderScaleQuality" config option is removed and "Linear scaling" option in GUI is replaced with the "GPU scaling" option (=bUseSdlRenderer config option)
*Added new "--screenshot-dir" option to select the folder for screenshots
*Fix: [ffmpeg/video] Invalid PNG signature 0x89504E470D0A1A
*Fix: garbage graphics (by clearing the whole render area)
*Fix: Spec512_StoreCyclePalette when using 16 or 32 MHz
- Input handling:
*Support SDL "Hat" events in addition to "Axes" events (= support 80's game controllers, also in SDL GUI)
*Map a turbofire button independent of the fire button if the game controller is capable
*Show mouse grab toggle shortcut key in startup statusbar message
*Center host mouse to Hatari window on Atari resets and resolution changes only when window is focused and mouse pointer is within it
*Fix: keypad emulation with SDL2
*Fix: simulated (socket API) key input with SDL2
- Profiler:
*Profiler backtrace shows now real caller addresses and their offsets from the function entry points (slows profiling of addresses with symbols)
*All profiler outputs have now reasonable limits (so that they don't flood console)
*Fix: exception in profile post-processor script (with symbol address aliases)
- Tracing:
*Fix: CPU disassembly trace output doesn't go to specified trace file
*Trace flags can be added and removed instead of needing to always specify all the relevant ones, both with "--trace" command line option and debugger "trace" command: --trace os_base,aes, trace +xbios,bios, trace -bios,-aes
*VDI trace shows names also for NVDI/Speedo/GDOS functions
*VDI & AES trace function numbers are shown in hexadecimals with 0x prefix like rest of the OS calls
- Debugger:
*New "screenshot" command for saving screen dump to a PNG/BMP file
*"symbols resident" option replaced with "symbols autoload" option which can be used to completely disable automatic symbol loading and unloading for programs run through the GEMDOS HD (helps debugging resident programs started from GEMDOS HD)
*Improvements to UAE and external disassembler disassembly
*UAE disassembler is now default instead of external one (latter doesn't decode all instructions correctly)
*New "info" subcommands: "acia", "dmasnd", "ikbd", "mfp", "nvram", "rtc" and "scc"
*Also UAE disassembler can now show the profile info
*"info" command can show AES & VDI information on on their respective traps without VDI mode/tracing being enabled
*Breakpoint ":info" option to call specified info function on tracing breakpoint hits (one can now use e.g. ":info vdi" on VdiOpcode breakpoints)
*Improved symbols info output
- Native features:
*Support for missing NF_SHUTDOWN (reset) sub commands
*Test code for rest of features (except for NF_SCSIDRV)
*When Hatari resets or exits due to emulated program NF_SHUTDOWN / NF_EXIT call, output user a note about that

Tools and Hatari Python/Gtk UI:
- Python scripts use now "python3" because most current distros don't anymore install Python v2 by default. To use a script with v2, change "python3" in its first line to "python2"

Building and unit tests:
- Source repository moved from Mercurial to Git
- Fix: issue with multilib capable cross-compilers
- Only Caps library v5.1 is supported (support for old v4.2 is dropped)
- Obsolete Mudflap option replaced with AddressSanitizer support
- Add tests for GEMDOS HD, fullscreen/overscan display, blitter and Hatari command FIFO + improve CPU/MMU variant coverage in earlier tests

- Up to date documentation provided at:
- New m68k-linux.txt and m68k-netbsd.txt documents on how to test m68k Linux and NetBSD under Hatari
- Debugging and profiling information is split from manual.html to a separate debugger.html file
- Minor improvements

Fixed demos:
- Pacemaker STE demo (end part), when it's run from GEMDOS HD
- Multi scrolls part in Closure by Sync (regression since Hatari 2.2, vsync in bottom border)
- Fullscreen part in Hard As Ice STE demo by I.C.E. (screen with no vertical DE signal)
- Fullast Vinner by Troed/Sync (improved vblank position, partial fix for now)
- Electric Night Falcon demo by Dune (MFP DMA sound interrupt on timer A using AER)
- Oompa by No Extra (after greetings part) (blitter access to bus error regions)
- E.K.O System (music should now play in the racing scene)

Fixed programs:
- MS Write (crash), when it's run from GEMDOS HD
- Akaisex program reading AKAI S1000 HD floppies converted to STX
- EmuTos drawing vertical lines with blitter and leaving some trails (blitter in non HOG mode using TAS intruction to restart)
- Cecile v2.22, now also works if no IDE drive has been configured
- Trans D-Bug Express by PHF (lock when running in megaSTE mode at 16 MHz)
Télécharger Hatari v2.3.0 (32-bit) (Windows)
Télécharger Hatari v2.3.0 (64-bit) (Windows)
Télécharger Hatari v2.3.0 (MacOS)
Télécharger Hatari v2.3.0 (Linux)
Site Officiel de Hatari
 GameEx et GameEx Arcade Edition v16.73 
Samedi 28/11/20 à 13:40 par Firebrand
Ces frontends multi-systèmes ont encore été mis à jour. Si les changements de la v16.73 ne sont pas (encore?) connus, voici ceux de la v16.72 et v16.70 publiés en retard sur le site officiel:
- Improved rendering performance.1080p 60fps on recent embedded hardware such as Appolo Lake Celerons.

- Animated PNG support.
- Fix allows Dpahne exe to have spaces in it.
Télécharger GameEx v16.73
Télécharger GameEx Arcade Edition v16.73
Site Officiel de GameEx
 RomVault v3.2.0 
Vendredi 27/11/20 à 13:24 par Firebrand
Ce gestionnaire des ROMs a été mis à jour. Les améliorations sont les suivantes:
- Added new Single Archive Dropdown settings to add Single Archive Types:
*Add SubDirs
*No SubDirs
*Add SubDirs if conflicts
*Add SubDirs if multiple roms
*Switched to a faster un-Deflate Stream so de-compressing zip files is now faster.
- Big speedup to the fixing report window.
- Stopped RV from trying to use chdman.exe on V1 CHD's (as chdman.exe no longer supports reading them.)
- Fixed a bug where locked (read only) directory did not set files to read only, (just the zips.)
- Fixed a bug where not all zipped files where being deleted in a fix, and a second fix was needed to delete them.
- Fixed a bug reading unicode names from zip file
- Fix a bug of DOSCenter Dat File Reader where the filename contained the word size.
- Added a try catch to Get Directory Info, to stop RomVault from crashing out if the Directory could not be accessed.
- Fix a dat reader bug where un-needed directory enteries where not correctly being removed from the DAT's while loading.
- There is also a matching update to match this release.
Télécharger RomVault v3.2.0
Site Officiel de RomVault
 GameEx v16.71 
Lundi 23/11/20 à 14:04 par Firebrand
Ces deux frontends multi-systèmes ont encore été mis à jour, mais si vous vouliez savoir ce qui a changé, ce ne sera encore pas pour cette fois avec l'absence habituelle de release notes.
Télécharger GameEx v16.71
Télécharger GameEx Arcade Edition v16.71
Site Officiel de GameEx
 GameEx et GameEx Arcade Edition v16.69 
Vendredi 20/11/20 à 12:41 par Firebrand
De nouvelles versions de ces frontends ont été publiées mais les améliorations ne sont pas connues.
Télécharger GameEx v16.69
Télécharger GameEx Arcade Edition v16.69
Site Officiel de GameEx
 RomCenter v4.1.0 
Mardi 17/11/20 à 13:51 par Firebrand
Après plus d'un an de gestation, une nouvelle version de ce gestionnaire de ROMs a été publiée. Cette version sera la dernière compatible avec Windows XP. Les améliorations sont les suivantes:
- Update database core to v3
- Add 'empty games' filter button in view toolbar
- Add 'folder' in preferred format setting
- Display expected folder in files view for uncompressed files.
- Keep same path displayed after path refresh
- Fix 'nodump' devices problem
- Fix operations are faster
- Fix and improve gfix command for clean up db.
- Fix bad type for device rom
- Fix crash when a unique operation is done on more than 1500 items
- Fix max thread limit handler
- Fix fields validation on global settings page
- Fix empty paths in settings on new install
- Catch more 7zip exception
- Improve operation cancellation
- Improve moving rom
- Improve files and rom deletion
- Tune database configuration to improve speed.
- Update 7z library
- Update zip library
- Update 32 machines datafiles generated from mame 226
- Following high quality systems datafiles (built from mame) are included in this release:
Télécharger RomCenter v4.1.0
Site Officiel de RomCenter
 Romulus v0.048 
Dimanche 15/11/20 à 13:35 par Firebrand
Une nouvelle version de ce gestionnaire de ROM a été publiée. Voici la liste des nouveautés:
- ADDED Updater new DAT group. Antopisa - Progetto Snaps. Thanks to Rowlaxx
- ADDED Updater new DAT group. Retroplay - Amiga. Thanks to Rowlaxx
- FIXED Windows defender positive virus by unknow reason.
Télécharger Romulus v0.048
Site Officiel de Romulus
 NegaMAME v0.226-1 
Jeudi 29/10/20 à 14:20 par Firebrand
Ce build de MAME prévu pour fonctionner avec le frontend Negatron a été mis à jour avec les sources de MAME v0.226.
Télécharger NegaMAME v0.226-1 (Windows)
Télécharger NegaMAME v0.226-1 (MacOS)
Télécharger NegaMAME v0.226-1 (Linux)
Site Officiel de NegaMAME
 GameEx et GameEx Arcade Edition v16.67 
Mardi 27/10/20 à 15:43 par Firebrand
Une nouvelle version de ces frontends multi-systèmes a été publiée, et, ô miracle, on sait ce qui a été modifié pour une fois:
- New GPU hardware based video recording on Windows 10, supporting HD 60fps and fullscreen esclusive apps.
- The video creation tool has also been improved, allowing individual games to be recorrded.
- Cleaner Windows start menu
Télécharger GameEx v16.67
Télécharger GameEx Arcade Edition v16.67
Site Officiel de GameEx
<< Page précédentePage suivante >>
2001-2021 Planet Emulation