Organiser
Filtrer par machine :
Type de vue :
 
 NegaMAME v0.241-1 
Jeudi 24/02/22 à 11:50 par Firebrand
Ces versions de MAME prévues pour être utilisées avec le frontend Negatron passent aussi à la v0.241.
Télécharger NegaMAME v0.241-1 (Windows)
Télécharger NegaMAME v0.241-1 (MacOS)
Télécharger NegaMAME v0.241-1 (Linux)
Site Officiel de NegaMAME
 
 ClrMAME Pro v4.044a 
Mardi 22/02/22 à 15:03 par Firebrand
Des correctifs ont été apportés à ce gestionnaire de ROMs. Voici ce dont il s'agit:
- fixed: xml parser comment/cdata issue
- fixed: falsely prompt for creating not existing but not active sysdefpaths
Télécharger ClrMAME Pro v4.044a (32-bit)
Télécharger ClrMAME Pro v4.044a (64-bit)
Site Officiel de ClrMAME Pro
 
 Messinfo.dat v0.240 (11.26) 
Dimanche 13/02/22 à 15:39 par Firebrand
La publication d'un nouveau Messinfo.dat clôture généralement la mise à jour des fichiers additionnels d'AntoPISA pour le cycle de MAME en cours. Voici celui pour la v0.240:
- 11.26 02/12/2022: Aligned files to 0.240 version.
Télécharger Messinfo.dat v0.240 (11.26)
Site Officiel de Messinfo.dat
 
 GameEx v17.21 
Dimanche 13/02/22 à 15:36 par Firebrand
Les mises à jour de la version classique et de l'Arcade Edition de GameEx semblent dissociées maintenant. Pas d'information sur les changements apportés.
Télécharger GameEx v17.21 (32-bit)
Télécharger GameEx v17.21 (.NET 6, 64-bit)
Site Officiel de GameEx
 
 GameEx Arcade Edition v17.20 
Lundi 07/02/22 à 14:25 par Firebrand
C'est au tour de l'Arcade Edition du frontend GameEx d'être mis à jour et d'avoir sa version 64-bit fonctionnant avec .NET 6.
Télécharger GameEx Arcade Edition v17.20 (32-bit)
Télécharger GameEx Arcade Edition v17.20 (.NET 6, 64-bit)
Site Officiel de GameEx Arcade Edition
 
 GameEx v17.20 
Dimanche 06/02/22 à 14:42 par Firebrand
Après GameEx Arcade Edition, c'est au tour du GameEx de base de faire cavalier seul avec une nouvelle version... enfin, deux nouvelles versions: aucune information n'a été officiellement donnée, mais une version .NET 6 est apparue en téléchargement principal sur le site officiel. Cela ressemble à la version prototype GameEx Core publiée en fin d'année dernière (l'Arcade Edition a aussi sa version Core en test) qui nécessitait .NET 6 ainsi que Windows 7 64-bit ou supérieur.
Télécharger GameEx v17.20 (32-bit)
Télécharger GameEx v17.20 (.NET 6, 64-bit)
Site Officiel de GameEx
 
 WinUAE v4.9.1 FR 
Vendredi 04/02/22 à 15:04 par Firebrand
La nouvelle version stable de WInUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v4.9.1 FR (32-bit)
Télécharger WinUAE v4.9.1 FR (64-bit)
Tradu-France
 
 WinUAE v4.9.1 
Vendredi 04/02/22 à 15:01 par Firebrand
La nouvelle version stable de WinUAE est arrivée. Voici les améliorations apportées depuis la précédente:
4.9.0 bugs fixed
- JIT indirect was unstable.
- JIT enabled + emulated (not uaegfx) RTG board corruption was possible in certain situations.
- Direct 3D 11 mode shader buffer leak.
- x86 AT bridgeboard (A2286 and A2386SX) boot crash.
- PCem RTG board 15 and 16-bit lores modes didn't horizontally double correctly.
- Remove interlace artifact option added 1 scanline offset to bitplanes and sprites.
- Custom chipset and programmed display mode updates and fixes.

Older bugs fixed
- Mouse would start moving erratically if emulator has been running continuously more than 10 hours.
- Integer scaling only worked correctly if horizontal (lores, hires, superhires) and vertical resolution (non-doubled, doubled) matched.Filtered lores had wrong colors if host graphics mode was 16-bit.
- NTSC mode and software switch to PAL: display was incorrectly vertically stretched.
- Software YUV based filters had bad colors (32-bit only)
- Paula configured for 4us (GCR) mode but normal 2us MFM disk in drive: disk index reporting was unreliable.

Updates
- Programmed display mode improvements (positioning, blanking etc)
- uaegfx Picasso96 overlay now works correctly with screen dragging.

New features
- It is now possible to type (almost) normally in warp mode. Keyboard key (if non-qualifier key) presses are released immediately in warp mode.
- Epson printer emulation does not anymore print each page as a separate document.
- Added IDE scsi.device disable hack. Makes booting noticeably quicker on OS39 and newer KS versions if mainboard IDE is not needed.
- PCem Cirrus Logic SVGA emulation planar support enabled. Picasso96 supports 4bit/16 color planar mode.
- "Default" filter and integer scale filters now automatically double horizontal or vertically if horizontal and vertical resolutions are different (for example lores + vertical doubling)
Télécharger WinUAE v4.9.1 (32-bit)
Télécharger WinUAE v4.9.1 (64-bit)
Site Officiel de WinUAE
 
 WinUAE v4.9.1 Beta 9 FR 
Mercredi 02/02/22 à 14:32 par Firebrand
La dernière beta de WinUAE est déjà disponible en français grâce à Tradu-France.
Télécharger WinUAE v4.9.1 Beta 9 FR (32-bit)
Télécharger WinUAE v4.9.1 Beta 9 FR (64-bit)
Tradu-France
 
 WinUAE v4.9.1 Beta 9 
Mercredi 02/02/22 à 14:29 par Firebrand
De nouveaux bugs ont été corrigés dans cette beta de WinUAE. En voici la description:
- b8 "default" filter update was not complete. Now image is automatically integer scaled if original image is half (or less) size of host window/fullscreen size.
- b8 MMU change didn't change much because MMU + CE isn't "real" CE mode but normal MMU + some timing adjustments. (Because there is not much point). Timing adjustments adjusted, now MMU + CE shouldn't be much slower than non-MMU CE mode.
- PAL filter (and probably some other software filters that internally use YUV) had wrong colors since 4.3.0, 32-bit version only.
Télécharger WinUAE v4.9.1 Beta 9 (32-bit)
Télécharger WinUAE v4.9.1 Beta 9 (64-bit)
Site Officiel de WinUAE
 
 RomVault v3.4.4 
Mardi 01/02/22 à 14:19 par Firebrand
Une nouvelle version de ce gestionnaire de ROMs a été publiée. Les améliorations son tles suivantes:
Feature Updates:
- Added a new directory setting for “Header Type” which can be used to enforce headered or headerless ROMs
- Added a new DATVault option to immediately download DATs after selecting a directory
- Enhanced native CHD verification by adding support for deflate V4 CHD without chdman.exe
- Enhanced the Quick Scan (Level 1) to also calculate MD5 or SHA1 for uncompressed files

Bug Fixes:
- Fix for a crash when initially updating DATs with DATVault if the DATRoot is not in the default location of the RomVault exe
- Fix for incorrect Linux path separators when saving DATs with DATVault
- Fix for a Linux display issue where the side buttons could appear missing
- Fix to calculate and store the AltCRC32 of headered ROMs
- Fixes related to the D,F,V flags not being properly assigned
Télécharger RomVault v3.4.4
Site Officiel de RomVault
 
 vAmiga v1.1 Beta 9 
Lundi 31/01/22 à 14:32 par Firebrand
Une nouvelle version de cet émulateur Amiga pour MacOS a été publiée. Voici la liste des changements:
Enhancements:
- The hardware config panel has been split into a separate chipset panel and a memory panel.

Compatibility:
- The DDF logic has been reworked from scratch based on the Agnus schematics.
- The HBLANK area has been shortened and moved (#637, #584, #575).

Bugs:
- The Copper can’t trigger at cycle $E3 any more.
- Fixed a bug in the LINK command that had been introduced recently.
- Fixed some Sanitizer warnings.
Télécharger vAmiga v1.1 Beta 9
Site Officiel de vAmiga
 
 NegaMAME v0.240-1 
Lundi 31/01/22 à 14:18 par Firebrand
Cette version de MAME adaptée au frontend Negatron a été mise à jour vers MAME v0.240.
Télécharger NegaMAME v0.240-1 (Windows)
Télécharger NegaMAME v0.240-1 (MacOS)
Télécharger NegaMAME v0.240-1 (Linux)
Site Officiel de NegaMAME
 
 WinUAE v4.9.1 Beta 8 
Dimanche 30/01/22 à 16:04 par Firebrand
La série de beta sera finalement un peu plus longue que prévu. Les améliorations sont les suivantes:
- Sprite collision bitplane end position calculation was not updated to 4.9.0+ chipset emulation. Probably didn't cause problems because it was too large and it most likely could not cause any spurious collisions.
- b6 ECS Denise CSYNC fix broke vertical blanking when EXTBLANKEN=1. Made only visible difference if mode was weird (not WB monitor driver)
- If programmed mode HSYNC start is later than normal, use it instead of standard VGA-like config. (More correct horizontal position if weird mode)
- Yet another Copper comparator update. WAIT and SKIP timing change again, all my statefile tests still work (and one that didn't also works now). SKIP comparison check timing is not same as WAIT, SKIP seems to check comparison result just before next copper instruction gets loaded (SKIP comparison active as long as IR1 and IR2 bits 0 are set)
- b4 bitplane number update fix, if number of bitplane was increased after hsync start but before hsync end, sometimes bitplane count change was ignored until next line.
- "Default" filter mode now also auto-adjusts if horizontal size does not match vertical (for example if horizontal is hires but vertical is nondoubled: double vertical automatically using filter scaling). Other modes are not yet updated because it can break existing configs.
- Reverted 490b25 68030+ MMU "CE" mode cycle count update that made it too slow compared to matching non-MMU mode.
Télécharger WinUAE v4.9.1 Beta 8 (32-bit)
Télécharger WinUAE v4.9.1 Beta 8 (64-bit)
Site Officiel de WinUAE
 
 MESS et MESSUI v0.240 (64-bit) 
Dimanche 30/01/22 à 15:54 par Firebrand
Ces builds de MAME ne comportant les machines d'arcade ont été mis à jour vers MAME v0.240. Cependant, l'auteur nous apprend que l'avenir de MESSUI (et peut-être MAMEUI?) n'est peut-être pas assuré à moyen terme:
Please note that a new bug was noticed just as I was about to upload the new versions. If you enter rubbish via the command line, it will freeze. For example, trying to run a non-existing game might give an error-message box and then hang, or it might do nothing at all. I don't know when this started, but I assume something changed in MAME.

As you might (or might not) know, before MESS and MAME were merged, MESS was a separate project, and both MESS and MESSUI were officially supported products. In order for certain things in MESSUI to work, support was included in MESS. When all this was merged with MAME, that winui support came across too. Unfortunately, certain devs are either ignorant of apparently unused functions, or don't care, and have been busily ripping out support in the name of pointless refactoring. One such case occurred this month when the entire support of software was ripped out, involving over 200 files. I had to revert this change for our builds, which means it is no longer possible for you to compile by patching the MAME source. You must now pull to the tag.

I am unsure how much longer our builds will be able to work against current MAME in the future. I'd give it a year or two at most. Just keeping you people in the loop.
Télécharger MESS v0.240 (64-bit)
Télécharger MESSUI v0.240 (64-bit)
Site Officiel de MESS
 
 WinUAE v4.9.1 Beta 7 FR 
Mardi 25/01/22 à 14:49 par Firebrand
La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v4.9.1 Beta 7 FR (32-bit)
Télécharger WinUAE v4.9.1 Beta 7 FR (64-bit)
Tradu-France
 
 WinUAE v4.9.1 Beta 7 
Mardi 25/01/22 à 14:47 par Firebrand
Il faudra un coup de collier supplémentaire pour la version stable. En effet, la nouvelle beta corrige encore des bugs. Le suite sera possiblement ce week-end. En attendant, voici les changements apportés:
- 68020/030 CE mode too long interrupt delay fix.
- Possible fix for mouse counter overflow after emulator has been running many hours.
- Weird programmed mode blanking position calculation fix.

Interrupt fix might be the reason for above game hang, if used config was 68020 or 30 + "cycle-exact".
Télécharger WinUAE v4.9.1 Beta 7 (32-bit)
Télécharger WinUAE v4.9.1 Beta 7 (64-bit)
Site Officiel de WinUAE
 
 vAmiga v1.1 Beta 8 
Lundi 24/01/22 à 17:33 par Firebrand
Une nouvelle version de cet émulateur Amiga pour MacOS a été mis à jour. Voici les nouveautés:
Accuracy improvements
- Reworked the entire DDF logic based on the Agnus schematics.
Télécharger vAmiga v1.1 Beta 8
Site Officiel de vAmiga
 
 WinUAE v4.9.1 Beta 6 
Dimanche 23/01/22 à 14:28 par Firebrand
Une nouvelle beta a été publiée pour WinUAE. Elle devrait être normalement la dernière de ce cycle voire même être la version finale. Les améliorations sont les suivantes:
- Use pre-430b5 lagless vsync behavior by default if Windows 7. -beamrace 0 command line will force 430b5+ behavior and -beamrace 1 will force pre-430b5 behavior.
- ECS Denise CSYNC blanking fixes. Denise ignores vblank strobes when deciding blanking if EXTBLKEN=1.
- Remove interlace artifact option enabled: bitplanes and sprites had 1 scanline offset. (introduced in some 490 beta)
- NTSC mode and software switch to PAL: display was incorrectly vertically stretched.
- Integer scaling only worked correctly if horizontal and vertical resolution matched (correct aspect ratio). Now also other combinations work correctly (for example superhires + any or lores + doubled)
Télécharger WinUAE v4.9.1 Beta 6 (32-bit)
Télécharger WinUAE v4.9.1 Beta 6 (64-bit)
Site Officiel de WinUAE
 
 WinUAE v4.9.1 Beta 5 FR 
Dimanche 16/01/22 à 14:57 par Firebrand
On n'a pas trainé chez Tradu-France pour traduire en français la dernière beta de WinUAE.
Télécharger WinUAE v4.9.1 Beta 5 FR (32-bit)
Télécharger WinUAE v4.9.1 Beta 5 FR (64-bit)
Tradu-France
 
<< Page précédentePage suivante >>