Organiser
Filtrer par machine :
Type de vue :
 
 WolfMESS v0.154 
Mardi 29/07/14 à 11:40 par Firebrand
Ce build de MESS désactivant les codes de triche pour les compétitions de high scores a été mis à jour avec les dernières sources de l'émulateur.
Télécharger WolfMESS v0.154
Site Officiel de WolfMESS
 
 WinUAE v2.8.2 Beta 6 (32-bit) 
Mardi 29/07/14 à 11:34 par Firebrand
Une nouvelle beta de cet émulateur qu'on ne présente plus a été publiée. Voici les nouveautés du jour:
- Added NCR53C94/FAS216 SCSI chip emulation (from QEMU)
- Added Blizzard1230IV/Blizzard1260 + Blizzard SCSI Kit IV emulation. SCSI Kit v8.5 ROM added to rom scanner.
- Added CyberStorm MK1 and CyberStorm MK2 emulation, map rom and SCSI included.
- Blizzard 2060 (map rom not emulated) and Warp Engine works now.
- CyberStorm PPC and Blizzard PPC 0xFFF00000 mapping improved, now switches correctly between KS map rom and PPC boot code locations. BPPC now correctly attempts to start flash built-in PPC support code during boot and hangs because PPC won't respond.
- Added warning message when BlizzardPPC or CyberStormPPC PPC CPU gets booted.
- Remap UAE Boot ROM (if needed) to secondary backup location if Blizzard PPC is enabled, if MMU emulation is enabled BPPC will remap normal boot ROM backup location causing boot hang.
- Added CyberStorm MK2 flash rom chip emulation, map rom and disable key support (=HALT4).
- Added CyberStorm MK2 full 128k rom image support (64k of autoconfig rom and 64k of diag rom)
- Flash chip emulation compatibility improved, fixed CSMK2 flasher infinite loop.
- Accelerator memory option now automatically changes CPU board memory if accelerator uses same memory type.
- Added keyboard to help Phase5 boot rom key detection, it still wasn't realiable enough with some boards.
- Added one second boot delay option to misc panel, allows easy access to boot menus without need to slow CPU emulation speed.
- Added 'Te' command to debugger, shows expansion autoconfig board information.
- CPU slot memory region was accidentally removed from mman list, causing random crashes in some JIT configurations.
- 68040+ more compatible / "cycle-exact" mode cache flush instructions didn't do anything.
Télécharger WinUAE v2.8.2 Beta 6 (32-bit)
Site Officiel de WinUAE
 
 WinUAE v2.8.2 Beta 5 FR (32-bit) 
Dimanche 27/07/14 à 10:47 par Firebrand
L'équipe de Tradu-France a rapidement adapté sa traduction à la nouvelle beta de WinUAE.
Télécharger WinUAE v2.8.2 Beta 5 FR (32-bit)
Tradu-France
 
 WinUAE v2.8.2 Beta 5 (32-bit) 
Dimanche 27/07/14 à 10:46 par Firebrand
Une nouvelle version beta de cet émulateur Amiga pour Windows a été publiée. Les améliorations sont les suivantes:
- Added optional FPU emulation that uses softfloat library, another feature not for normal use. Full 80-bit FP accuracy, bit-perfect results (not including trigonometric functions), supports FPU arithmetic exceptions, much slower (Uses integer algorithms, host FPU is not used).
- Added mostly unmodified Qemu 53c895a SCSI emulation (originally heavily modified for 53c710 emulation). It is 53c770 compatible, 53c770 is used in CyberStorm MK3 and CyberStorm PPC.
- Some 53c710 updates, Blizzard PPC SCSI driver didn't work.
- Added simple flash rom emulator.
- Fastest possible CPU option is now available for cycle-exact modes. CPU internal cycles are not counted, only (mainboard) memory accesses are cycle exact (DMA steals cycles from CPU) in this mode.
- 68040/060 "cycle-exact" mode is back, emulates only Amiga mainboard memory accesses cycle-exactly, includes instruction(*) cache emulation. Any 32-bit fast ram or cached access is still immediate. (Which is still much closer to real 040/060 than old behavior, 040/060 is heavily bottle-necked when accessing mainboard)
- 68040/060 "compatible" mode now adds instruction cache emulation.
- 68030/040/60 MMU mode "more compatible" (68030: adds both instruction and data cache emulation, 68040/060: instruction cache only) and "cycle-exact" modes supported. (more compatible + mainboard access slowed down)
- 68030: data cache support is temporarily disabled. (Didn't work with MMU for some reasonm)
- DFx: eject messages appeared in new status bar even if drive was already empty.
- Right-align status messages in fullscreen mode.
- A2065 autoconfig was broken (b4)
- b1 directory filesystem change rewritten again, removed also lots of unneeded complexity from original code.
- On screen CPU halt message reason code was always 1.
- Generated virtual RDB (when IDE/SCSI mounting partition hardfile) created empty string for device name.
- 270b6 "JIT MOVEM used direct mode if memory was direct capable but direct mode was disabled." was wrong fix, original code probably was done to work around some JIT indirect bug.. (AmiKit crash during boot if JIT is in indirect mode)
Télécharger WinUAE v2.8.2 Beta 5 (32-bit)
Site Officiel de WinUAE
 
 UME v0.154 
Samedi 26/07/14 à 12:47 par Firebrand
Cette synthèse de MAME et MESS regroupe les différentes améliorations des 2 nouvelles versions.
Télécharger UME v0.154
Site Officiel de UME
 
 Messinfo.dat v8.06 
Samedi 26/07/14 à 12:43 par Firebrand
Ce fichier informatif pour mess a vu ses données mises à jour:
- 8.03 29/05/2014: Updated presence of software lists (49% right) and updated the SVN until May 29, 2014 (r30708). Started the upgrade of the resources available (on my website) for each set (5% right).
- 8.04 10/06/2014: Updated the SVN until June 8, 2014 (r30892).
- 8.05 22/06/2014: Updated the SVN until June 22, 2014 (r31075).
- 8.06 25/07/2014: Aligned files to 0.154 version. Updated this files: 'sourcechanges.txt', 'changelog.txt', 'alltimesMESS_WIP.txt' and 'Drivers SVN...txt'. Updated the SVN until July 23, 2014 (r31396). Updated presence of software lists (56% right). Updated 'Index of Devices'.
Télécharger Messinfo.dat v8.06
Site Officiel de Messinfo.dat
 
 MESSUI v0.154 (32-bit) 
Samedi 26/07/14 à 12:39 par Firebrand
La version de MESS pourvue d'une interface graphique utilisateur a été mise à jour avec les dernières sources de MESS.
Télécharger MESSUI v0.154 (32-bit)
Site Officiel de MESSUI
 
 MESS v0.154 (32-bit) 
Samedi 26/07/14 à 12:37 par Firebrand
Le petit frère de MAME pour les machines domestiques s'offre aussi une nouvelle version. Voyons ce qu'elle apporte:
MAMETesters Bugs Fixed
- 05108: [Crash/Freeze] (atari400.c) a600xl: Crash with "-cart salt100"
- 05583: [Crash/Freeze] (gba.c) GBA: Pokemon Sapphire crashes BIOS on fullpath,
runs fine on softlist (Fabio Priuli)
- 05508: [Crash/Freeze] (nes.c) dendy: [debug] Assertion with -cart genchohi (Fabio Priuli)
- 05512: [Misc.] (sg1000.c) All sg1000.c sets: AddressSanitizer: heap-use-after-free -
with 8K carts (Fabio Priuli)
- 05510: [Crash/Freeze] (exelv.c) All exelv.c sets: Crash with -aviwrite or -mngwrite (Firewave)
- 05511: [Misc.] (supracan.c) supracan: AddressSanitizer: stack-buffer-overflow (Alex Jackson)
- 05567: [Crash/Freeze] (ct486.c) ct486: Starting XFree86 with the "svga_dm" graphics card
crashes MESS (mahlemiut)
- 05551: [Crash/Freeze] (odyssey2.c) Pete Axe Pete!, Frogger (in NTSC system), others: odyssey2
SIGABRT with clang optimizations in OS X (Wilbert Pol)
- 05547: [Crash/Freeze] (ct486.c) ct486: System locks up when attempting to boot MS-DOS 6.22
- 05541: [Core] (coco12.c) coco2b and coco3/3h: coco2b and coco3/3h will not run correct versions of NitrOS-9 (Osso)
- 05525: [Misc.] (at.c) at486,ct486: Mouse doesn't work in Windows 2000. (crazyc)
- 05509: [Crash/Freeze] (tandy2k.c) All tandy2k.c sets: [debug] Assertion

New System Drivers Supported:
- Goldstar Famicom FC-100 [Robbbert, Anna Wu]
- New driver added: Xerox Alto 2 [Juergen Buchmueller]
- FM-Towns Marty 2 [caius, Barry Rodewald]
- Yamaha FB-01 [Wilbert Pol]
- Texas Instruments Compact Computer 40 [hap, Jon Guidry]

Systems Promoted from GAME_NOT_WORKING:
- Master System Store Display Unit [Enik Land]

Skeleton drivers:
- HP 9845A/S [Curt Coder]
- HP 9835A/B [Curt Coder]
- HP 9845B/T/C [Curt Coder]
- Fanuc System P Model G (monochrome) [Guru, R. Belmont]
- Epson LX810L [Felipe Sanchez]
- Epson Action Printer 2000 [Felipe Sanchez]
- Gimix 6809 System [Tafoid]
- Intelbras TI630 telephone [Felipe Sanches]
- TI-74 BASICALC [hap]
- Psion Organiser I [Sandro Ronco]
- Psion Organiser II XP Psion Organiser II P200 [Sandro Ronco]
- TECNBRAS Dot Matrix Display [Felipe Sanches]
- Minicom IV (teletype device) [Felipe Sanches]

Software Lists:
- snes.xml : some new dumps added [ReadOnly]
- abc80.xml: Added Myab CP/M BIOS 3.7. [Robert Juhasz]
- pet_flop.xml: Replaced bad D80 for Z-RAM. [Mike Naberezny]
- sc3000: Added cartridge and cassette software lists. [Curt Coder, Anna Wu]
- nes.xml: added correct nvram to dezaemon, thanks to naruko's research [Fabio Priuli]
- vectrex.xml: some fixes and additions. [hornpipe2, Fabio Priuli]
- osbexec: Added floppy software list. [Dave Dunfield, The Don Maslin Archive]
- mbc200: Added floppy software list. [Dave Dunfield, Chuck(G)]
- pet_rom.xml: Added InfoPro. [Paul Rickards, Mike Naberezny]
- gba.xml: Added newer revision of Sim City 2000 [BPzeBanshee]
- c64_cart.xml: Added another version of Super Snapshot 5. [Malice]

Source Changes
- Support 115200 on Apple III [smf]
- Added preliminary keyboard hook-up in AAKART device, adding bare-bones keyboard inputs to Acorn Archimedes. [Angelo Salese]
- smssdisp: implemented game selection. [Enik Land]
- megacd.c: Convert to device_gfx_interface, use device finders, cleanups [Alex Jackson]
- PVE500.c: Work on keyboard, 7-seg display and maincpu (z80) daisy chaining. Added declaration of DIP switches. [Felipe Sanches]
- rainbow.c : unmap unavailable RAM. Hard limits and 'floating bus' code removed. [Bavarese]
- dec_lk201.c : KEYCODE_2 corrected. RIGHT CONTROL now triggers DO. [Bavarese]
- apple3: preliminary joystick support [R. Belmont]
- Oric 1: Spring cleaning [O. Galibert]
- Apple II: implemented cycle-exact Disk II floppy controller using the modern floppy subsystem. [O. Galibert, R. Belmont]
- sms: added support for Furrtek's multitap adapter (supported by BOoM homebrew game). [Enik Land]
- Apple II updates: [R. Belmont]
*Some minor cleanup to how post-IIe machines are handled
*Fixed N/M keys on Platinum IIe and IIgs
- Apple II: Correct setup of built-in ACIAs for IIc/IIc Plus [R. Belmont]
- emulate ie15 keyboard & use RS232 port [shattered]
- avigo.c & hunter2.c Allow all rs232 devices [smf]
- clcd.c fixed irq hookup. [smf]
- thomson: fix for incorrect palettes in a seldom used video mode [Antonie Mine]
- hp48: fix for memory cards and addition of imgtool support for it [Antonie Mine]
- Apple 1: Added support for expansion slot, moved cassette interface to a card to match reality. [R. Belmont]
- pet: Added user port diagnostic connector. [Curt Coder]
- Apple I: Support CFFA1 Compact Flash/IDE adaptor [R. Belmont, based on a patch by Christopher Bachmann]
- next: Add mouse [O. Galibert]
- next: Setup the time [O. Galibert]
- next: mouse/nmi fixes [O. Galibert]
- Cybiko: Make serial loopback on cybikoxt, gets past first (of several) hangups. [R. Belmont]
- next: fix the vblank disables [O. Galibert]
- cybiko updates: [R. Belmont]
*Fixed major memory stomp in cybikov2
*Fixed "insert battery" message in cybikoxt; the OS boots up now
*Started general cleanup of I/O handling
- amstrad: added preliminary Amstrad/Pace RS232C interface. The terminal software included with the original Amstrad interface works, but not much else does at this stage. [Barry Rodewald]
- cybiko: more I/O re-hookup. [R. Belmont]
- hp9845: Added software lists for option ROMs. [Curt Coder]
- fanucspg: Better colors from new reference. [Guru, R. Belmont]
- RAINBOW.C: IRQ priorities updated. Board revisions and add-on cards documented; rainbow100 renamed to rainbow100a. [Bavarese]
- fanucspg: Mapped most of the chips on the i86 side. [Carl]
- nes: added support the new homebrew PCB used by 2A03 Puritans
Album. [Fabio Priuli]
- nes.c: Fixed Silva Saga, which relies on SRAM not being 0x00 filled from factory, with many thanks to naruko for investigating the problem. [Fabio Priuli]
- apfm1000 / apfimag: more accurate support for on-cart 1K RAM in Space Destroyer (no more need of using -ramsize 1K option at launch). [Fabio Priuli]
- Apple II: enforce read twice requirement for language card. [R. Belmont]
- a7800.c:
*Brought initial Maria cycle counts inline from measurements taken with logic analyzer/tests. [Mike Saarna/Robert Tuccitto]
*Added interrupts to DMA cycle eating. Updates to LL, OL, and spin accounting for HALT behavior. [Mike Saarna]
- kb3600: More sensible multi-key handling, now actually behaves like h/w. [R. Belmont]
- apple3: Preliminary reset key handling. [R. Belmont]
- megapc: added alternate MegaPC Plus set which uses a WINBUS chipset [Chris Hardy, Barry Rodewald]
- msx.c: [Wilbert Pol]
*Reimplemented the cartridge slots as slot devices.
*Moved the msx slot layouts to inline machine configuration.
*Started adding support for a few more firmware types.
*Add turbo support to Panasonic FS-A1FX/FS-A1WX/FS-A1WSX.
- Amiga: Implement internal IDE controller for the Amiga 4000. Fix RTC hookup in Amiga 3000 and 4000. Set RP5C01 RTC to actually return 24 hour mode, which fixes RTC detection for the Amiga. [Dirk Best]
- amigafdc: Add writing [O. Galibert]
- Amiga: Kill the legacy CIA emulation and fix Agnus ID for A2000 and A500. [Dirk Best]
CIA changes:
*Add missing virtual keyword to actually call the right TOD clock
*Outputs depend on the input state (fixes A1000 overlay switch)
*Switching to serial output mode with one-shot activated causes a pulse on SP (correct? needed for keyboard handshake)
*Serial input is clocked by the CNT input, not the default clock
*Mask offsets to 4 bits
*Writing the Timer High register with one-shot activated immediately causes the timer to be latched and the timer started, regardless of timer start value
- at: added preliminary ATi Graphics Ultra Pro (mach32) ISA video card.
[Barry Rodewald]
- fmtowns: added clone FM Towns II FreshTV [caius, Barry Rodewald]
- Amiga: Support PAL/NTSC switch for machines equipped with an ECS Agnus
chip or better. [Dirk Best]
Core changes:
*Save screen pixelclock.
*Call reset_partial_updates() in finish_screen_updates() instead of creating an extra timer for it. This prevents calling reset_partial_updates() after finishing the screen, causes issues when screens change their size to a size lower than the current screen.
*Optimization: Support calling vblank_begin() directly at the start of a frame instead of using a timer.
- Amiga: Add version 6.1 bootroms for the A590/A2091 and RAM controller PAL [Guru]
- sun3: Work in progress on Sun 3/80. It now POSTs. [R. Belmont]
- c8050: Added ROM signatures for 901483-04. [Paul Rickards, Mike Naberezny]
- x68k: compose the gfx and sprite/bg layers individually before drawing to the screen [Carl]
- exelv.c [Gilles Fétis] Improved emulation in driver to the point where exl100 will successfully load and execute cartridges. Still lacking any input at the moment.
- nes.c: fixed WRAM banking for MMC5, so that Bandit Kings of Ancient China (and Suikoden - Tenmei no Chikai) can be considered as working. Also fixed wrong battery size for Aoki Ookami to Shiroki Mejika - Genchou Hishi in xml, which was causing a "Memory Over" error message ingame. [Fabio Priuli]
- msx.c: Added support for mapper used by Holy Quran. [hap, Wilbert Pol]
- ql: Added slot interfaces for the expansion and ROM cartridge ports. Modernized the Sandy Super Disk, Sandy SuperQBoard, and Miracle Trump Card floppy interfaces. Added a device for the QIMI (not working yet). Created skeletons for several expansion cards. [Curt Coder]
- rainbow.c: New floppy code - uses more reliable 'wd_fdc'. [Bavarese]
- ql: Added preliminary CST Q+4 emulation. [Curt Coder]
- gb.c: Added GameBoy Pocket Boot ROM. [BennVenn]
- vtech1: Add "VZ-200 Enhanced BASIC V1.01" [Chicken Man]
- Apollo updates [Hans Ostermeyer]
*Fixed ISA bus endianness, it's the same as other 680x0 systems with ISA
*Improved logging in several places
*"20 years ago" option updated to now-necessary "25 years ago"
*Fixed ISA high IRQ routing
*Fixed 3c505 to have a 16 bit ISA interface
*Fixed omti8621 and sc499 to have correct-endian ISA interfaces
- hprot1: [Felipe Sanches]
*new derivative "CARD I PCB rev.08A"
*new derivative "CARD II PCB rev.6"
*fixed LCD rendering (now both lines are displayed properly)
*inverted logic of the inputs so that now we can navigate the menu
- mac: fix 0.153 regression that prevented several Macs from booting. [R. Belmont]
- apple2: Support some oddball sized disk images and DOS 3.3 disks that were ripped in ProDOS sector order. [R. Belmont]
- sms.c: Several timing fixes: [Enik Land]
*Fix flicker on Choplifter title screen by drawing the borders through timers.
*Instead trigger NMI at end of the display, do it at end of top border (line 261 after start of active screen area).
*Add a delay to NMI, to be later than HINT, as stated by Flubba's VDPTest readme.
* Also based on VDPTest readme, change VINT and Sprite Overflow flags to be later than VCount change.
*Delay a little the display callback, to fix the title scrolling of Road Rash (SMS game).
*Fixed documentation of the scanline sections and change some timings to match.
*Calculate initial VCount values, instead use of hardcoded values.
- wswan.c: Added noise emulation [trap15, Wilbert Pol]
- mac: add PMU ROMs for later use [R. Belmont]
- gameboy: Added support for Li Cheng pirate mapper. [taizou, Fabio Priuli]
- osdcore: Allow "default" for -midiin and -midiout. [R. Belmont]
- Apple II: Support for the Mountain Computer Music System. [R. Belmont]
- apple II: support Decillionix DX-1 sampler card. [R. Belmont]
- c64: Precalculate PLA outputs for approximately 5% speedup. [Curt Coder]
- glcolor: added LCD emulation and inputs. [Sandro Ronco]
- vz300 floppy: Initial modern implementation [O. Galibert]
- Apple II: Add volume control register to DX-1 card. [R. Belmont]
- vtvideo.c): finally fix smooth scrolling (ED084 =1). See DIAG DISK -> VIDEO TEST -> screen 3 (Rainbow driver - SKIP 0). [Bavarese]
- atari400.c - Slightly revised Atari XL cartridge loading so that it doesn't crash when loading 8K carts. Confirmed to fix MT#05108. [alegend45]
- dmv: various updates to allow CP/M to boot. [Sandro Ronco]
- apple3: now using the cycle-accurate floppy emulation. [R. Belmont]
- corvushd: Fixed prep mode verify drive command. [Mike Naberezny] The verify drive command (0x07) is used by the "format check" options of both the Corvus diagnostics program and the SSE
HardBox configure program. Previously, format check would halt with an error because we did not return a valid response for the verify drive command. Format check now completes successfully and reports no bad sectors.
- corvushd: Fixed get drive parameters command. [Mike Naberezny] The "read controller code version" option in the Corvus diagnostics program now shows the correct version and drive capacity.
- c64: some optimizations [Alex Jackson]
*read_pla() leaves the PLA outputs packed, instead of using eight output parameters to return them
*flatten nested switch statements in read_memory() and write_memory()
*mos6566: inline bus_r() and various READ_LINE_MEMBERs
- corvushd: Prep mode now supports multiple drives. [Mike Naberezny] This allows the Corvus diagnostics program to format any drive. Previously, the drive id sent in the command to enter prep mode was ignored and drive 1 would always be formatted instead.
- c64 improvement & fix [Alex Jackson]
*Cache pointers to basic and kernal ROMs at startup (they can be in separate ROM regions or a single ROM depending on model) rather than branching on every read
*Moved "ProLogic-DOS Classic" BIOS from c64 to c64c, since it's clearly meant for, and only successfully boots on, the latter machine
- Colecovision PAL BIOS [TSM Carmine]
- Fixed Quickload (c64) to allow files packed with Kompressmaster v4.1-3 from Peter Arndt. [M.A.S.H.]
- amstrad: added the ability for expansion devices to contain ROMs (as some do). added ROMs for DK'Tronics Speech Synthesiser, and both RS232 interfaces (plus one alternate for the Amstrad interface). split Amstrad and Pace serial interfaces into separate devices as they have different sized ROM areas. [Barry Rodewald]
- wicat: added additional boot ROMs [Al Kossow, Barry Rodewald]
- abc806: Added video PROMs. [Anders Sandahl]
- Minor Apollo cleanups & removal of no-longer-supported options, plus data format fix for systems using a serial terminal. [Hans Ostermeyer]
- abc806: Added video PALs. [Anders Sandahl]
- cat.c: fix canon cat breakage from r30715 [Lord Nightmare]
- VTVIDEO: Added new interlaced mode. Also handle cases where undocumented delays / skip lines are poked (SQUINT; VIDEO.PAS). [Bavarese]
- Super80 : added floppy disk controller [Robbbert]
- Super80 : major cleanup [Robbbert]
- LFT1510 : connected to terminal, working [Robbbert]
- Applix : adjusted default dipswitches so that it will boot [Robbbert]
Télécharger MESS v0.154 (32-bit)
Site Officiel de MESS
 
 WinUAE v2.8.2 Beta 4 FR (32-bit) 
Mercredi 23/07/14 à 18:40 par Firebrand
La version traduite en français de la dernière beta est déjà disponible!
Télécharger WinUAE v2.8.2 Beta 4 FR (32-bit)
Tradu-France
 
 WinUAE v2.8.2 Beta 4 (32-bit) 
Mercredi 23/07/14 à 18:39 par Firebrand
Une nouvelle beta de WinUAE est sortie il y a quelques jours. Les améliorations sont les suivantes:
- Added Blizzard 1230-IV and Blizzard 1260 board options. Do not use if you only want to run WB and other programs, it is not JIT direct compatible due to memory address space aliasing. Only emulates memory layout (which is Blizzard unique), matching CPU is not 100% required if you want to try weird configs. Map ROM is also emulated, old map rom checkbox in ROM panel enables Blizzard hardware maprom if Blizzard board is selected. Requires matching Blizzard flash ROM images. (Only difference between 1230IV and 1240/1260 is slightly different boot rom, hardware ram addresses appear to be exact same) Mostly useless, mainly meant to help development and testing. (Useful for aros m68k testing for me at least)
- Added Warp Engine board emulation (It has already emulated 53C710 SCSI), autoconfig works, ROM code runs, SCSI (53C710) does not work yet, not yet sure how jumpers are mapped to board address space.
- Really fixed CD32 data track checks. (CD32 Commodore Demo Disc 2.0 MPEG tracks)
- Disk Swapper panel drag'n'drop or file dialog multiselect mangled file names strangely.
- Added A590 XT drive emulation. A590 emulation is now complete WARNING: XT drives use real physical CHS geometry, don't attempt to use hardfiles formatted using other controller, it won't work in real world. (Emulation includes work around hack) Largest XT drive was 40M and protocol max limit is 511 cylinders, 15 heads and 63 sectors = ~235M. Both SCSI and XT drive can be active at the same time in same controller. Interesting fact about ROM xt.device: It uses WD33C93 Translate Address command to convert LBA to CHS which means WD33C93 chip needs to be inserted and working or XT (which has nothing to with SCSI) port won't work.
- Fixed A590/A2091 SCSI emulation crash if SCSI ID was non-zero.
- Z3 autoconfig was broken (b1).
- Serial port data rate register (SERPER) was not saved correctly to statefile.
- Serial port transmit interrupt and transmit related status bits are now more accurately timed in cycle-exact CPU modes. (If some software really cares, probably not)
- Inter-process serial port emulation added, when selected, automatically creates virtual null modem cable between two winuae processes. Uses shared memory, no latency. (Says "Master" in serial port selection menu if WinUAE instance created shared memory and "Slave" if shared memory was already created by some other instance. If nothing = something failed)
- Added support for short text messages, appears in OSD bar's unused space and windowed mode bottom bar. Currently only shows disk image eject/insert and input device autoswitch information. OSD messages won't appear in following configurations: native mode + DirectDraw + no filter and RTG mode + DirectDraw. (In DirectDraw mode status bar is drawn directly to target surface, erasing gets annoying because it should not be read. In D3D mode it is another texture, hardware does the rest)
- Added remove all button to Disk Swapper panel.
- Game controllers can be now optionally kept active when winuae window is not active or minimized.
Télécharger WinUAE v2.8.2 Beta 4 (32-bit)
Site Officiel de WinUAE
 
 WinUAE v2.8.2 Beta 3 FR (32-bit) 
Samedi 12/07/14 à 11:08 par Firebrand
La dernière beta de WinUAE est déjà disponible en français grâce à Tradu-France.
Télécharger WinUAE v2.8.2 Beta 3 FR (32-bit)
Tradu-France
 
 WinUAE v2.8.2 Beta 3 (32-bit) 
Samedi 12/07/14 à 11:07 par Firebrand
2 nouvelles versions de cet émulateur Amiga pour Windows ont été publiées. Voici la liste des nouveautés:
Beta 3:
- Selected chipset extra didn't match what dialog box shows (b2). This broke many configs..
- CD32 FMV 16-bit display mode support.
- A590/A2091, A3000, A4000T and A4091 SCSI was not initialized unless at least one device was connected (b1).
- Added Picasso IV flash rom v7.4 image to rom scanner. It does not need to be called picasso_iv_flash.rom anymore.
- Added Blizzard 1230-IV and 1240/1260 Boot ROMs to rom scanner. (Coming soon Blizzard 1230/40/60 unique memory layout and maprom emulation. It can be useful for developers and for testing without real board. This was supposed to be implemented in this beta but chipset extra bug required quick update)
- .bin extension added to ROM scanner.

Beta 2:
- Pointless CD32 Full Motion Video cartridge emulation! (Check notes below)
- CD32 FMV 40.22 ROM image rom scanner checksum fixed (was from byteswapped image). ROM rescan required.
- Added CD32 FMV option to Expansion panel.
- Added CD32 FMV to ROM scanner result dialog.
- GamePorts panel autofire always-option crashed.
- CD image emulation didn't support 2336 to 2352 sector size conversion.
- CD image emulation didn't return correct data if image had 2 data tracks back to back and tracks from second data track was requested. (Cannon Fodder CD32 FMV track)
- Debugger MOVES instruction's source and destination was swapped.
- Quickstart CD image selection text box become empty after image was selected (b1)
- RTG scale options didn't work on the fly. (2.8.0)

CD32 FMV notes:
- ROM requests won't be allowed and will be deleted. ("Find" it yourself or get AmigaForever or something)
- Only supports CL450 MPEG decoder commands that basic playback needs.
- VCD quality is not that good: MPEG-1 with 352x288 (PAL) or 352x240 (NTSC) resolution, MPEG-1 layer 2 audio.
- Requires at least null filter. (Automatically enabled)
- Requires 32-bit display mode, 16-bit will work in future. (Not automatically enabled)
- Tested with CD32 FMV 40.22 and 40.30 ROM versions.
- Tested only with Cannon Fodder CD32 video track and one VCD movie.
- Rewind or fast forward hangs the player software. (No idea why. No CL450 commands sent.)
- AV sync may not be that good.
- Sound buffer underflows will happen.
- CL450 video window size and position values ignored, video window is always centered and automatically 1x/2x/4x scaled.
- Video is 1:1 pixel mapped, aspect ratio is ignored.
- Before reporting anything: make sure your Cannon Fodder CD32 image is correct. It must have 2 data tracks, check .cue file using any text editor. Plain iso also can't work.
- Config must be based on Quickstart "CD32 with Full Motion Video cartridge". Do not load old CD32 config and tick CD32 FMV expansion option. If you do it, you are on your own.
- Only obvious bugs (very jittery video, nothing happens etc..) will be accepted. Everything else will be ignored until I get my own FMV cartridge. I won't pay for it. Exception is getting enough donations.
Télécharger WinUAE v2.8.2 Beta 3 (32-bit)
Site Officiel de WinUAE
 
 WinUAE v2.8.2 Beta 1 (32-bit) 
Samedi 05/07/14 à 11:07 par Firebrand
L'infatigable Tony Wilen recommence un nouveau cycle de beta pour WinUAE. Voici les améliorations apportées:
- Debugger TR command didn't handle linked resident lists correctly (inverted mask..).
- TO debugger command also lists FileSysStartupMsg and DosEnvec of mounted devices.
- Slow down 68EC020 RTE instruction, fast clock rate multiplier modes could have executed MOVE to INTREQ + RTE combination too quickly (before Paula had cleared the interrupt) causing interrupt to re-trigger immediately after RTE.
- Added SCSI controller selection to GUI and config file. ("SCSI (Auto)" does same as old plain SCSI selection = use first enabled SCSI controller).
- More than 1 SCSI controller can be now active simultaneously. (For example A4000T + A4091)
- Added support for two A590/A2091 and two A4091 boards, both (or even all 4) can be active at the same time.
- Secondary A590/A2091 and A4091 share primary board's boot ROM by default. a2091_2_rom_file and a4091_2_rom_file config file entry can be used to select other ROM version.
- 280b7 sprite update missed AGA bordersprite condition, causing clipped sprites in some situations (Silicon Graphics 2 / WFMH)
- Rewritten directory filesystem Examine Next logic, now returned fib_DiskKey always have file/directory entry specific unique value. Some programs check fib_DiskKey and (incorrectly) assume that it is unique value and may also assume file must be same if both file's have same fib_DiskKey. Now also C:List KEY output looks "correct". This needs testing because original (Tripos?) directory enumeration packet design is not that good..
- AGA border sprite bit set and if same scanline had at least 1 sprite that was outside of playfield and at least 1 bitplane was active and BPLCON4 palette XOR value was non-zero: wrong background color was visible in some situations. (Nexus 7 / Andromeda "shade cluster" part)
- Some BEAMCON0 programmed mode emulation updates. VBSTRT/VBSTOP register values only affect screen if VARVBEN bit is set.
- Use also value stored in VBSTRT (vertical blank start) register when setting up programmed mode vertical size, some weird modes can have (much) smaller VBSTRT than VSSTRT (vertical sync start). (Jtxrules by Illusion)
- HBSTRT/HBSTOP register values are only used if BPLCON3 EXTBLKEN bit is set. (Demos Contactro and Jtxrules by Illusion)
- BEAMCON0 HARDDIS bit also disables DDFSTRT hardware limit. (Weird stuff, VARBEAMEN disables it too, even superhires mode disables it..)
- Fixed "CPU trace blahblah" error after 68020+ state file was loaded and loaded program used bitfield instructions later.
- Split ROM images didn't load (again..) correctly if relative path mode was active.
- Added support for missing Z2 RAM board sizes (64k/128k/256k/512k). Note that small boards (256k and less) can be mapped at IO autoconfig base (0xe90000+) which makes predicting final address difficult: JIT (if enabled) can't use direct mode to access this RAM board.
- Added support for second Z2 fast RAM board. Size must be smaller or same as first board. (Makes JIT board address calculation simpler)
- Above two changes mean it is now possible to have total 6M of Z2 RAM in 24 bit addressing config with 2M gfx board config (4M + 2M and 2M gfx) or less useful 8M fast + extra 256k of fast config...
- Z2 gfx board JIT direct calculation didn't correctly align the board base address if Z2 RAM size was less than Z2 gfx board size.
- Implemented no-hack Z3 memory mapping, lets OS handle Z3 autoconfig without patching base addressess from >=0x40000000 to >=0x10000000. This mode is not JIT Direct compatible. Option in Memory panel. Do not enable unless you know what are you doing and you really need 100% matching real hardware Z3 address mapping.
- Use no-hack Z3 allocation automatically if all configured boards fit in official Z3 space, fully JIT Direct compatible. Requires 64-bit Windows and available space will be about 300M to 500M. RAM panel text string shows free space. 32-bit Chip RAM does not count, it is not Z3 board and it is always located at 0x10000000.
- Added 384M and 768M 32-bit Chip RAM size options. (768M fits perfectly at 0x10000000-0x3fffffff)
- Added Z3 autoconfig advanced chipset option. If ticked (or A3000/A3000T/A4000/A4000T chipset extra selected), Z33 boards will now appear at Z3 autoconfig space (0xFF000000), previously Z2 space was always used. Z2 space is supported by AOS but most real, but not all, Z3 boards use Z3 space. Optional because not all KS ROMs (for example A1200) support Z3 autoconfig space but do support Z3 boards.
- Try to keep number of cylinders under 65536 when generating default geometry even if partition hardfile is very large (>100G) for better old AOS compatibility. (Helps my big partition PFS3 testing..)
- Hardware (Cirrus Logic) RTG board emulation incorrectly required UAE boot ROM.
- 68030 MMU update from Previous, fixes some supervisor/write protect edge cases.
- Added "history" menu to filesystem, hardfile and tape path selection text boxes.
- Added portable mode (.ini) on/off state to Paths panel. Read-only, enabling it on the fly would cause all kinds of side-effects. Unsupported warning removed.
Télécharger WinUAE v2.8.2 Beta 1 (32-bit)
Site Officiel de WinUAE
 
 WinUAE v2.8.1 (stable) FR (64-bit) 
Lundi 30/06/14 à 18:31 par Firebrand
Avec un décalage de plusieurs jours avec la version 32-bit, la version 64-bit du dernier WinUAE est maintenant disponible en français.
Télécharger WinUAE v2.8.1 (stable) FR (64-bit)
Tradu-France
 
 WinUAE v2.8.1 FR (stable) (32-bit) 
Dimanche 22/06/14 à 10:56 par Firebrand
Et voilà: la nouvelle version stable de WinUAE est désormais disponible en français mais uniquement en version 32-bit (pour l'instant?).
Télécharger WinUAE v2.8.1 FR (stable) (32-bit)
Tradu-FranceUAE
 
 WinUAE v2.8.1 Beta 8 FR (32-bit) 
Jeudi 19/06/14 à 19:39 par Firebrand
Une nouvelle version de WinUAE traduite en français vient d'être publier. Cependant, il s'agit de la dernière version beta et non de la version stable. Gageons que cette dernière arrivera sous peu.
Télécharger WinUAE v2.8.1 Beta 8 FR (32-bit)
Tradu-France
 
 WinUAE v2.8.1 (stable) (32-bit) 
Jeudi 19/06/14 à 19:37 par Firebrand
WinUAE est désormais disponible en version stable (en 32 et en 64-bit). Voici la liste des modifications apportées depuis la v2.8.0:
2.8.0 bugs fixed:
- JIT on/off on the fly switching was unreliable.
- A500 reading write-only/non-existing registers method introduced in 2.8.0 was incorrectly also used in AGA modes.

Updates:
- Fast CPU mode audio DMA wait hack compatibility improved (workaround for programs that use CPU delay loops in audio code)
- Some chipset emulation updates, Critical Mass / Parallax finally works.
- AROS ROM updated.

New features:
- Directory filesystem MorphOS compatible >4G file size DOS packet support.
- Paths panel relative path mode now supports relative paths that point outside of winuae root directory.

Bug fixes:
- Filter modes in DirectDraw crashed in some situations.
- Disk insert using GUI after emulation was started inserted disk in write protected state.
- Quickstart disk eject button was unreliable.
- Video recording with "Capture before filtering" unticked used wrong video size.
Télécharger WinUAE v2.8.1 (stable) (32-bit)
Site Officiel de WinUAE
 
 WinUAE v2.8.1 Beta 7 (final beta) (32- 
Samedi 14/06/14 à 12:12 par Firebrand
Et une dernière beta pour la route de cet émulateur Amiga pour Windows. On devrait avoir une version stable la prochaine fois. En attendant, voici la liste des nouveautés:
- Yet another BPLxDAT update. If BPL1DAT is written when sprite is already active and no planes enabled in BPLCON0, "sprites visible 1 lores pixel before first bitplane pixel" feature is not active. Previous update was not correct and broke some other demos. (Real fix for Rink A Dink / Lemon extra pixel in rotozoomer part)
- 68000 CE with 8x (or higher) clock multiplier was really fast (270b4)
- AROS ROM updated.
Télécharger WinUAE v2.8.1 Beta 7 (final beta) (32-
Site Officiel de WinUAE
 
 WinUAE v2.8.1 Beta 6 (RC3) (32-bit) 
Dimanche 08/06/14 à 10:25 par Firebrand
Cette dernière beta de WinUAE propose seulement des correctifs. En voici la liste:
- b2 HAM update was incomplete and broken, nr_color_changes check was not fully working. (b2)
- Display panel missing translations added (autoresolution and brightness/contrast/gamma)
- Some file operations (zipped files, possibly something else too) didn't support recently introduced relative "..\" path part update.
- Copper emulation state was not fully reset when restoring state file, in some situations copper may have modified restored custom register in next cycle after state was restored.
Télécharger WinUAE v2.8.1 Beta 6 (RC3) (32-bit)
Site Officiel de WinUAE
 
 WinUAE v2.8.1 Beta 5 (RC2) (32-bit) 
Jeudi 05/06/14 à 18:33 par Firebrand
Une nouvelle version de cet émulateur Amiga pour Windows a été publié. Les améliorations sont les suivantes:
- Relative path improvement broke CDFS CD mounting in some configurations.
- Ungrab (b4) event didn't disable mouse capture when it was activated in fullscreen modes.
- VPOS LOF bit toggles (if interlace) exactly 2 cycles before first refresh slot. Logic analyzer tested.
- Copper vblank strobe also stopped the copper if DMA was disabled and second strobe register was accessed previously. Broke in 280b1. (Sequential / Andromeda first screen)
- More accurate BPL1DAT emulation. (Glitches appeared in Sequential / Andromeda magnet part's left border when one pixel gap in Rink a Dink / Lemon rotozoomer part white border was fixed)
- 8-bit split (odd/even) roms didn't load if merged parent was missing.
Télécharger WinUAE v2.8.1 Beta 5 (RC2) (32-bit)
Site Officiel de WinUAE
 
<< Page précédentePage suivante >>