Accueil > Amiga > News
 
 
Organiser
Filtrer par machine :
Type de vue :
 
 WinUAE v3.3.0 Beta 3 FR (32-bit) 
Mardi 02/02/16 à 12:49 par Firebrand
La dernière version de WinUAE est disponible en français grâce à Tradu-France.
Télécharger WinUAE v3.3.0 Beta 3 FR (32-bit)
Tradu-France
 
 WinUAE v3.3.0 Beta 3 (32-bit) 
Mardi 02/02/16 à 12:48 par Firebrand
Une nouvelle beta de cet émulateur Amiga pour Windows a été publiée. Les améliorations sont les suivantes:
(It says b2 but just ignore it for now..)

- When matching config file and on the fly connected game controllers, first check if both id and friendly name match and only if no match, check id only and finally name only. Some multi slot controller adapters have unique name for each port but all ports have same ID. (Was id and then name matching previously)
- Remembered input device selections are now forgotten when new config is loaded.
- On the fly unplugged devices are now properly remembered and re-inserted if on the fly reconnected.
- PC Bridge disk drives raw image support (extended adf, ipf and so on.) Standard DOS disks only, no copy protections or other tricks supported. Read-only, writing is not supported.
- JIT slider now only shows power of 2 cache size values and max is 16384. (Max was already changed in previous betas)
- Linked config files loaded unreliably (or never) due to uninitialized variable.
- Real storage device (harddisk, memory card etc..) failed to open the device if it didn't have device path, only drive letter.
- CDFS automount didn't mount CDs with empty label, dos does not like empty volume names, replace empty name with "NO_LABEL"
- BPLCON0 BYPASS bit emulated. AGA-only, bypasses palette selection, creates gray scale output. (Microcosm cheat mode effect)
- Added A1000 composite out monochrome output mode emulation when BPLCON0 COLOR bit is zeroed. Option in advanced chipset panel. Only emulated if no video port display devices enabled, monochrome emulation shares same code (and in real world it is also not possible, RGB video out is not affected by COLOR bit). Also added always-on monochrome
mode option to Display panel. (Uses HRM documented gray scale brightness = 30% red, 60% green and 10% blue)
- "Atari ST palette fix" added to Display panel, called "Dark palette fix". It is wrong to mention Atari ST in GUI There are few stupid Atari ST ports that use original palette (3 bits/component) = halved brightness in Amiga.
- UAE autoconfig board/boot ROM selection added to ROM panel. Do not touch unless you wan to run OS4 + UAE expansions. OS4 + UAE expansions: must be set to last option, "New UAE (128k, ROM, Indirect)". (Quickly added to GUI, probably will change in future versions)

OS4 compatible UAE autoconfig board, boot ROM and communication interface.
- OS4 UAE expansion thread is here, all OS4 related goes there: http://eab.abime.net/showthread.php?t=81146
- Currently supported UAE devices:
*Directory harddrives.
*uaehf.device (UAE HD controller hardfiles)
*uaegfx RTG. (Copy OS3.x uaegfx and uaegfx.info to OS4.x Devs:Monitors)
*uaenet.device
*uae.resource
*uaelib ("uaelib_demux" trap)
- Not yet supported (lots more work needed):
*bsdsocket.library (This is the most difficult)
*uaenative.library
*clipboard sharing
*uaescsi.device
*virtual mouse driver
*on the fly directory harddrive changes.
- And everything else that was not mentioned.
- Notes:
*Slower than normal host<>Amiga communication because every read or write that accesses Amiga memory needs to be done in Amiga side (due to non-1:1 logical/physical mapping). It will never be as fast as direct communication.
*Remember to set ROM panel UAE expansion type to "New UAE (128k, ROM, Indirect)".
*Directory harddrive (copied from HDF) OS4 installation will boot but it is not recommended, it is slower than HDF and there is mysterious issue that causes random read errors. (Missing font requester when booting is the most common side-effect)
*Most UAE expansions have preliminary updates for indirect trap support and support required multiple major changes = many things can be strangely broken..
Télécharger WinUAE v3.3.0 Beta 3 (32-bit)
Site Officiel de WinUAE
 
 MESSUI v0.170 (32-bit) 
Mercredi 27/01/16 à 12:32 par Firebrand
Cette version de MAME/MESS avec une interface utilisateur graphique a été mis à jour vers la 0.170.
Télécharger MESSUI v0.170 (32-bit)
Site Officiel de MESSUI
 
 ClrMAME Pro v4.027 (32-bit) 
Mardi 26/01/16 à 12:57 par Firebrand
Une nouvelle version de ce gestionnaire de ROMs a été publiée. Voici les nouveautés:
- misc: 32bit version still runs on SSE1 processors
- misc: compiled with VS Studio 2015 Update 1
- misc: updated to unrar lib/sdk 5.31.1 and 7z lib/sdk to 15.14
- misc: prevent system sleep mode for scan, rebuild, merge tasks
- misc: the minimum value for rebuilder option to skip folder after X skipped files is now 1
- added: setinfo tree lists empty sets only on request (context menu) and empty tree branches are removed
- misc: setinfo tree gets reendered on actions (apply, invert, etc) when show enabled/disabled is used
- added: %r=1, %P=1, %H=1 variable (has roms, is sample-only set, is chd-only set)
- misc: select sets variables %h,%p,%M,%B,%I,%r,%P,%H also supports =0 now (e.g. %h=1 has chds; %h=0 hasn't chds)
- removed: cmpro.ini switch Adv_DatFormatXML, Export format (from setinfo) can now be switched in dir2dat
- added: dir2dat can export in softwarelist format (pretty preliminary but a start)
- added: dir2dat option add manufacturer -> from folder, which takes the current folder name as manufacturer/publisher (in single set mode only)
- hint: if you don't collect chds/samples and don't want cmpro to moan about missing sets, you can use %H=1;%P=1 (Apply, Invert, check 'initial invert' checkbox) to disable chd-only and sample-only sets
Télécharger ClrMAME Pro v4.027 (32-bit)
Site Officiel de ClrMAME Pro
 
 FS-UAE v2.7.7 dev (32-bit) 
Dimanche 17/01/16 à 13:07 par Firebrand
Une nouvelle version de cet émulateur Amiga a été publiée. Les améliorations sont les suivantes:
Changes in FS-UAE 2.7.7dev:
- Compile with hardening disabled for Fedora 23+.
- Automatically scan $BASE/AmigaForever/Amiga Files/Shared/rom for Kickstarts.

Changes in FS-UAE Launcher 2.7.7dev:
- Always sort variant list in rated order from oagd.net, but prefer locally available variants.
- Automatically scan $BASE/AmigaForever/Amiga Files/Shared/rom for Kickstarts.
- Automatically add $BASE/AmigaForever/Amiga Files to file scanner.
- Kickstart import: Show how many ROM files were imported (or warn if none).
- Blacklist mouse_integration from advanced settings (use per-config instead).
- Added support for WHDLoad 18.2, set as default version.
Télécharger FS-UAE v2.7.7 dev (32-bit)
Site Officiel de FS-UAE
 
 WinUAE v3.3.0 Beta 2 FR (32-bit) 
Samedi 16/01/16 à 13:13 par Firebrand
La dernière version du WinUAE est désormais disponible en français grâce à Tradu-France.
Télécharger WinUAE v3.3.0 Beta 2 FR (32-bit)
Tradu-France
 
 WinUAE v3.3.0 Beta 2 (32-bit) 
Mercredi 13/01/16 à 12:41 par Firebrand
Une nouvelle beta a été publiée pour WinUAE. Les améliorations sont les suivantes:
- Game Ports panel keyboard layouts didn't load from config file. (b1)
- Only first (of 3) Input panel keyboard config slot was loaded correctly. (b1)
- Other input handling fixes (very old, old and b1) and updates. Some problems probably still remain unfixed.
- GUI allowed unsupported combination: more compatible CPU ticked in JIT + 68040/68060 modes.
- Hardfile SCSI emulation READ CAPACITY block count off by one if PMI bit was set.
- MODE SENSE (10) added to HD SCSI emulator.
Télécharger WinUAE v3.3.0 Beta 2 (32-bit)
Site Officiel de WinUAE
 
 WinUAE v3.3.0 Beta 1 FR (32-bit) 
Lundi 11/01/16 à 11:39 par Firebrand
La première beta de WinUAE est déjà traduite en français grâce à Tradu-France.
Télécharger WinUAE v3.3.0 Beta 1 FR (32-bit)
Tradu-France
 
 WinUAE v3.3.0 Beta 1 (32-bit) 
Lundi 11/01/16 à 11:38 par Firebrand
Une nouvelle vague de beta commence pour cet émulateur Amiga. Voici les nouveautés de cette version:
- Added extra validation checks for STORAGE_DEVICE_DESCRIPTOR, buggy drivers may return invalid (negative) offset values.
- 64-bit JIT harmless "Warning! 12 is locked" log spamming disabled.
- Updated copper/blitter cycle conflict emulation. It only triggers when CPU writes to COPJMP, Copper is waiting and Copper DMA is enabled (and blitter uses same cycle). If Copper DMA was off, bug won't trigger, even if DMA gets
enabled few cycles later. Copper bug emulation is again always enabled if 68000 and cycle-exact config.
- Cancel main thread sleep state immediately (Sleep due to CPU idle or similar) if PPC thread caused mainboard interrupt. This should reduce PPC to M68K interrupt emulation latency.
- Hardware RTG emulation rendered same frame twice in some situations. Caused very slow performance in triple buffered mode.
- Debugger keyboard presses were buffered and output to Amiga-side when debugger was exited.
- Starting disk DMA does not flush Paula internal 16 bit buffer. Poll DSKBYTR for DSKSYNC, immediately start disk DMA with WORDSYNC enabled: following sync word must not be missed. (Original Virus really slow loading in cycle-exact mode)
- Chip ram was marked as 16-bit Fast RAM for the CPU (no DMA contention emulation) if any memwatch point was active.
- Amithlon partition type (0x78/0x30) support was broken, partitions were detected but it was not possible to mount them.
- Added SX32 Pro board and ROM image. (Not all RAM sizes are correctly mapped)
- Only unmap Z3 Fast RAM at reset if Z3 mapping mode is "Real" for better compatibility with old configs that assume Z3 RAM does not temporarily disappear at boot.
- JIT on/off on the fly change without other CPU settings changed at the same time with uae-configuration didn't work.
- Hardware emulation autoconfig board UAE interface first working feature: uae-configuration now works under OS4 Requires also updated uae-configuration, interface can also work under other non-m68k AmigaOS operating systems, only requirement is simple native uae-configuration port. Interface design is not final yet.
- If CSPPC or BPPC is booted with empty or zero size flash rom image, fake resident idtag is automatically added that fools official flash rom updater to detect working board, "updating" the empty flash with full image (updater contains full flash rom image in encrypted format)
- Debugger memwatch points can now match only CPU instruction (CPUI) or only CPU data accesses (CPUD, CPUDR, CPUDW)
- "Heat map" debugger added, shows optional visual heatmap of CPU and DMA accesses. Can list highest addresses used by CPU instruction fetches or all addresses that single device accessed (Some DMA channel, CPU)
- Some AGA modes were incorrectly detected as bitplane DMA overrunning causing screen corruption.
- AROS ROM updated.

Input system and mapping updates:
- Added SPC_SWAPJOYPORTS input event, swaps gameports joystick ports.
- Added END+J default mapping = SPC_SWAPJOYPORTS.
- Device autoswitch didn't ignore button release without matching press.
- Device autoswitch switches to new Game Ports custom event if it has fire button mapped to mouse or gamepad.
- "WinUAE null keyboard" renamed to "WinUAE keyboard", this is now the default global virtual keyboard. GamePorts panel only uses this keyboard, multiple keyboards are only supported in Input panel mode and only if manually enabled. Reduces complexity and confusion when moving configurations between systems with different number of keyboards.
- Game Ports custom mapping rewritten. Now Game Ports list has 6 custom slots which can me inserted to any joystick port. New custom mapping data is also saved to separate config entries, one per slot.
- Old Game Ports custom config is automatically converted to new custom mapping system.
- Removed X-Arcade built-in layouts. Re-create them with new custom mapping system if needed.
- Cleared custom input event string equals setting event to "".
- Fixed since the beginning bug that caused incorrectly matched input device(s) and input config when config was loaded with different connected input devices and order of devices was also different.
- Rewritten game ports validation (Detect and fix if same device in multiple ports etc..).
- Old config files should still work like previously except: game Ports custom mapping and first keyboard input config goes to WinUAE keyboard slot.
- Last few Game Ports panel inserted devices (layout or real input device) are remembered. For example if config is loaded with joypad A inserted in port 2 but pad is not plugged in, then user manually changes it to joypad B. Now if pad A is later reinserted and pad B is removed, A is automatically put in port 2. It also works with keyboard layouts or new custom layouts, if keyboard layout was previously selected, then it was later replaced with gamepad, if gamepad is unplugged on the fly, previous keyboard layout is automatically selected.

EDIT: Last minute bug found, Game Ports panel keyboard layouts A/B/C do not load correctly from config file.
Télécharger WinUAE v3.3.0 Beta 1 (32-bit)
Site Officiel de WinUAE
 
 Messinfo.dat v10.04 (MAME/MESS v0.169) 
Vendredi 08/01/16 à 10:45 par Firebrand
Une nouvelle version de ce fichier informatif pour les machines domestiques de MAME a été publiée. L'auteur précise que depuis la v0.166, il faut placer le fichier dans le dossier Dats. Voici les données modifiées:
- 10.04 04/01/2016: Aligned files to 0.169 version. Updated this files: 'sourcechanges.txt', 'changelog.txt', 'alltimesMESS.txt', 'Drivers SVN...txt', 'supportedMEDIA.txt' and 'Index of Devices'. Updated the SVN until December 30, 2015 (r43025).
- 10.03 22/12/2015: Updated the SVN until December 22, 2015 (r42904).
- 10.02 01/12/2015: Various corrections suggested by JuLePe: deleted the internal references of the sites [##], 'see the more...', 'see below' and 'see pictures'. Correcting the "?" characters which include: Accented vowels (á, é, í, ó, ú, è, ö, ä, ã, å), Slovakian/Serbian characters (Š, ?, ?, ý), Asian characters (tg16 system), apostrophes (wouldn't, computer's,...), another characters (£ € ¥ ½ ¼ ® ™ µ ° ? ß(German ss) ± ² ³ ...). From now on, the file will be available exclusively in UTF-8 format.
Télécharger Messinfo.dat v10.04 (MAME/MESS v0.169)
Site Officiel de Messinfo.dat
 
 MESSUI v0.169 (32-bit) 
Jeudi 31/12/15 à 12:06 par Firebrand
Ce build de MAME avec interface graphique utilisateur intégrée a été mis à jour avec les sources de MAME v0.169.
Télécharger MESSUI v0.169 (32-bit)
Site Officiel de MESSUI
 
 WinUAE v3.2.2 (stable) FR (32-bit) 
Mercredi 23/12/15 à 12:38 par Firebrand
La dernière version stable de WinUAE a été traduite en français par Tradu-France.
Télécharger WinUAE v3.2.2 (stable) FR (32-bit)
Tradu-France
 
 FS-UAE v2.7.5 dev (32-bit) 
Mercredi 23/12/15 à 12:21 par Firebrand
Une nouvelle version de cet émulateur Amiga a été publiée. Voici les nouveautés:
Changes in FS-UAE 2.7.6dev:
- Fix AGA flickering bug introduced in 2.5.40dev.
- Do not use R12 register in x86-64 JIT due to addressing issue.
- Lowered default floppy drive sound volume.
- Warn when uae_cachesize is used without jit_compiler enabled.
- Theme options override options from config.
- Updated emulation core from WinUAE 3220.

Changes in FS-UAE Launcher 2.7.6dev:
- Most dialogs are non-modal again.
- Misc user interface updates.
Télécharger FS-UAE v2.7.5 dev (32-bit)
Site Officiel de FS-UAE
 
 WinUAE v3.2.2(stable) (32-bit) 
Mardi 22/12/15 à 12:28 par Firebrand
La v3.2.2 de WinUAE est désormais disponible en version stable. Voici l'ensemble des améliorations depuis la précédente:
3.2.0 bugs fixed:
- JIT FPU 32-bit and 64-bit compatibility fixes.
- Interlace mode blank screen in some configurations.
- Slirp network mode high CPU usage.
- Some programs that use AGA subpixel scrolling had horizontal
jittering.
- Per-monitor high DPI update still caused repeated GUI window
closing/opening.

Other bug fixes:
- Game controllers suddenly stopped working. Most likely only happened
under Windows 10 and only in some setups.
- MIDI out devices missing (x64 only).
- Serial port transmit buffer was not always flushed.
- 68020+ BFFFO undocumented offset calculation fixed.

Updates:
- AVIOutput in capture before filtering mode: width is now always divisible
by 16 pixels and height is always even for best codec compatibility.
- Useless, very basic and invisible touch screen mouse and joystick overlay.
- Load config with joystick that is not connected, fall back to previously
loaded (default.uae) setting instead of always falling back to keyboard
layout A.
- Out of bounds RTG coordinates are now clipped to valid region instead of
rejecting whole operation.
- Keyboard names (if available) are now listed in Input panel device list.
- Built-in HRTmon update v2.36.
- Phoenix Board SCSI emulation.
Télécharger WinUAE v3.2.2(stable) (32-bit)
Site Officiel de WinUAE
 
 WinUAE v3.2.2 Beta 4 (32-bit) 
Lundi 21/12/15 à 11:46 par Firebrand
Une nouvelle beta de cet émulateur Amiga pour Windows a été publiée. Celle-ci devrait normalement être la dernière du cycle en court. Les améliorations sont les suivantes:
- Serial emulation didn't flush transmit buffer, it was possible last few characters remained in buffer. (This was the last remaining bug I wanted to fix, was difficult to duplicate)
- AVIOutput hang if sound emulation was idle. (Sound was autoswitched off)
- Added hidden (no overlays) touch mouse and joystick support. Only enabled when touch panel is detected, Game Ports panel mouse driver is not active and Windows mouse is not selected. Multi-touch supported. Located in bottom half of screen, left side is always mouse, right side is always joystick. First basic implementation. Nothing is configurable. Tested only with Wisky 7.85 Windows tablet. (Most of this was already done weeks ago)
- Sending input event externally (via uae-configuration for example) that goes to inactive Amiga-side port
Télécharger WinUAE v3.2.2 Beta 4 (32-bit)
Site Officiel de WinUAE
 
 WinUAE v3.2.1 Beta 3 FR (32-bit) 
Jeudi 17/12/15 à 12:49 par Firebrand
Tradu-France a réagi très rapidement pour traduire la dernière beta de WinUAE.
Télécharger WinUAE v3.2.1 Beta 3 FR (32-bit)
Tradu-France
 
 WinUAE v3.2.2 Beta 3 (32-bit) 
Jeudi 17/12/15 à 12:42 par Firebrand
Une nouvelle beta dont le cycle s'annonce court de cet émulateur Amiga a été publié. Voici les modifications apportées:
- Debugger thought slow ram was IO region if ECS Agnus.
- CDTV-CR mode CD led didn't flash when reading data, only when playing audio.
- Fixed linestate array buffer underrun if mode was interlaced. Most common side-effect was blanked screen in interlaced modes, especially in fields or fields+ mode, if build was full optimized.
Télécharger WinUAE v3.2.2 Beta 3 (32-bit)
Site Officiel de WinUAE
 
 WinUAE v3.2.1 Beta 2 FR (32-bit) 
Mardi 15/12/15 à 12:50 par Firebrand
La dernière beta de WinUAE a été traduite en français par Tradu-France.
Télécharger WinUAE v3.2.1 Beta 2 FR (32-bit)
Tradu-France
 
 WinUAE v3.2.2 Beta 2 (32-bit) 
Lundi 14/12/15 à 13:13 par Firebrand
Une nouvelle beta de cet émulateur Amiga pour Windows a été publiée. Voici les améliorations apportées:
Beta 2:
- SASI/SASI (CHS) options were not visible in GUI when listing SASI controllers.
- No MIDI out devices detected, 64-bit only.
- AVIOutput with "capture before filtering": width is now always divisible by 16 and height is divisible by two.
- Added config file only optional AVIOutput position and offset parameters: recording_width and recording_height, (resolution of video) and recording_x and recording_y, offset from top/left of Amiga display. If offsets are not set or negative, Amiga display is automatically centered. Only available in "capture before filtering" mode. GUI setting may be added later.
- Windowed mode bottom bar CPU state didn't show PPC state if x86 and PPC CPU expansion was active at the same time.
- Phoenix Board SCSI emulation added.

Phoenix Board SCSI:
- Autoconfig, 5380 SCSI chip.
- Very simple design, PIO SCSI, software handshake. (No "fake DMA").
- Boot ROM version J added, pbscsi.device 3.1. ("Phoenix Board SCSI J 29/7/92")
Télécharger WinUAE v3.2.2 Beta 2 (32-bit)
Site Officiel de WinUAE
 
 WinUAE v3.2.1 Beta 1 FR (32-bit) 
Vendredi 11/12/15 à 12:43 par Firebrand
La dernière version de WinUAE est disponible en français grâce à Tradu-France.
Télécharger WinUAE v3.2.1 Beta 1 FR (32-bit)
Tradu-France
 
<< Page précédentePage suivante >>