Organiser
Filtrer par machine :
Type de vue :
 
 ClrMAME Pro v4.039 
Lundi 14/12/20 à 14:01 par Firebrand
Ce gestionnaire de ROMs a été mis à jour. Les améliorations sont les suivantes:
- fixed: www profiler, don't truncate protocol from page url, so you can use http or https (however you need to update your settings once)
- fixed: www profiler shows downloaded and updated dats still as update
- fixed: don't prompt user that the download was ok when www profiler loaded a decompressed dat
- fixed: downloaded and not moved decompressed dats get removed when closing cmpro
- fixed: some sets don't get marked as unneeded or weird renames are proposed in mame/software list combined mode only
- fixed: parent/clone relationship of software list roms got lost under some circumstance
- fixed: 32k pathlength support doesn't work for profiles/datfiles
- fixed: fixing a wrong sysdefpath issue only worked when you got "ask before fixing" enabled
- fixed: xml parser fails on xml files with
- fixed: falsely trim "." characters at the end of filenames
- fixed: falesly check 'marked disabled sets as unneeded' sets for wrong names
- fixed: falsely hide missing bios roms in bios sets when separate bios sets is disabled
- fixed: falsely skip rebuilding bios roms in bios sets when separate bios sets is disabled
- fixed: falsely load not updated profiler cache after delete profile operations
- fixed: 32k path support failed for paths which are exactly MAX_PATH long
- fixed: scanner font selection isn't applied/saved when you use the default font (blank name)
- fixed: misleading wrong merged messages when using regions/languages
- misc: www profiler, allow redownload of local datfiles
misc: use UTC based time/date for date/time fixing
- misc: allow odd second values (MS DOS times are over)
- misc: allow yyyymmddTHHMMSS as date/timestamp in dat
- misc: www profiler can handle urls which provide filenames by content-disposition header information
- misc: updated rar ddl
- added: %L=1/0 option for set-info select sets to enable/disble sets which reference software lists
- added: show number of selected profiles/datfiles in profiler window title
Télécharger ClrMAME Pro v4.039 (32-bit)
Télécharger ClrMAME Pro v4.039 (64-bit)
Site Officiel de ClrMAME Pro
 
 KEGS v1.03 
Samedi 12/12/20 à 13:51 par Firebrand
Une nouvelle version de cet émulateur Apple // pour MacOS et Linux a été publiée. Les améliorations sont les suivantes:
- This is beta quality
- Add Mockingboard support. In the IIgs control panel, set slot 4 to Your Card, and KEGS will emulate a stereo Mockingboard A.
- Disk images can be gzip compressed (master.dsk.gz, for example) and KEGS can load them as readonly.
- .sdk disk images can be loaded directly (read only). Only the first disk image in a .sdk archive will be opened.
- Debugger is now a separate window. Press F7. "bp" allows setting a range, so "bp c400-c4ff" sets breakpoints on all addresses in that range.
- If the debugger window pops up, it means emulation has halted. Press 'g' and then return in the debugger window to try to restart KEGS. It may just halt again. This area needs improvement, you will likely need to quit out of KEGS and start over if 'g' a few times doesn't continue emulation.
- KEGS allows resizing windows. On Linux X11, KEGS does the scaling.
- Removed HP PA-RISC assembly, which simplifies compiling a bit.
- 2.8MHz speed now emulated at 2.8MHz, which is a little fast, but makes some very timing-sensitive code in the NFS Megademo work better.
Télécharger KEGS v1.03 (MacOS)
Télécharger KEGS v1.03 (Linux)
Site Officiel de KEGS
 
 Xebra/Arbex v2020/12/09 
Vendredi 11/12/20 à 14:52 par Firebrand
Une nouvelle version pour cet émulateur PlayStation a été publiée, mais les modifications ne sont pas connues.
Télécharger Xebra/Arbex v2020/12/09
Site Officiel de Xebra/Arbex
 
 Steem SSE v4.0.2 R24 
Jeudi 10/12/20 à 13:31 par Firebrand
Cet émulateur Atari ST a été mis à jour. Les améliorations sont les suivantes:
- (re)Fix PRG/TOS support STF
- Debugger (re)fix crash on config change
- Fix save screenshot to clipboard when freeimage.dll loaded (D3D)
- 6301 random mouse state on reboot
- Faster rendering in medium resolution (32bit)
- Fix overscan, no border corruption
- Green disk manager
Télécharger Steem SSE v4.0.2 R24 (32-bit)
Télécharger Steem SSE v4.0.2 R24 (64-bit)
Site Officiel de Steem SSE
 
 WinUAE v4.5.0 Beta 12 FR 
Mardi 08/12/20 à 13:48 par Firebrand
La dernière beta de WinUAE est disponible en français grâce à Tradu-France.
Télécharger WinUAE v4.5.0 Beta 12 FR (32-bit)
Télécharger WinUAE v4.5.0 Beta 12 FR (64-bit)
Tradu-France
 
 WinUAE v4.5.0 Beta 12 
Lundi 07/12/20 à 13:33 par Firebrand
Une nouvelle beta pour cet émulateur Amiga a été publiée. Les améliorations sont les suivantes:
- 68000/010 cycle-exact/prefetch: If long write access, check IPL when first word of long has been written, not after last word. Fixes Made in Croatia / Binary (again).
- Cycle-exact blitter DMA sequencer emulation now matches real hardware shift register based logic. Includes almost accurate emulation of on the fly modifications of BLTCON0/BLTCON1 (blitter cycle diagram changes). This should fix remaining A500 demos that do stupid things with the blitter. For example TLC Lotus 2 crack intro which is very broken.
- When in warp mode, alternate between 10 and 11 skipped frames (was always 10). Previously if program showed exactly 10 frame animation, it looked like emulation had paused.
- Reverted b1 copper skip update, it broke Tek/Rampage.
- Added Hardital Synthesis emulation.
- Added M.A.S.T. Fireball emulation

Hardital Synthesis:
- Clone of ICD AdSCSI (It seems to be common theme: Hardital Dotto is a clone of ICD AdIDE, Hardital TQM appears to be a clone of DKB Cobra)
- Identical autoconfig data.
- Driver has strings "ICDBoot.device", "ICD BootRom (C)1992" "hidden" in nibble part of boot ROM. All visible strings have been edited from "ICD" to "SYN". Different than AdSCSI ROMs, probably based on later not yet dumped AdSCSI ROM version.

M.A.S.T. Fireball:
- True DMA! Has really weird way to set up DMA controller address pointer, it needs minimum of 7*2 IO writes, max (7+6*7)*2 IO writes to configure it. Yes, amount of writes depends on DMA address value.
- Not RDB compatible. Uses same partition table structure as A2090.
- ROM version string: "FireBall 0.4 (10 Mar 1990)"
Télécharger WinUAE v4.5.0 Beta 12 (32-bit)
Télécharger WinUAE v4.5.0 Beta 12 (64-bit)
Site Officiel de WinUAE
 
 Romulus v0.049 
Dimanche 06/12/20 à 13:29 par Firebrand
Une nouvelle version de ce gestionnaire des ROMs a été publiée. Un seul changement est à noter:
- FIXED Updater list extraction information.
Télécharger Romulus v0.049
Site Officiel de Romulus
 
 CaPriCe Forever v20.12 
Dimanche 06/12/20 à 13:27 par Firebrand
Cet émulateur Amstrad CPC a été mis à jour. Les améliorations sont les suivantes:
- Remove Taskbar to Win32 release to keep compatibility with Windows XP;
- Support X-Mass storage peripheral;
- Remove X-Mem "Free" button;
- Upgrade Graphics Explorer GUI;
- Improve breakpoints to filter lower and upper roms;
- Speed-up emulator shutdown;
- AMX Mouse emulation review;
- Add Symbiface Mouse emulation;
- Fix minor bugs.
Télécharger CaPriCe Forever v20.12 (32-bit)
Télécharger CaPriCe Forever v20.12 (64-bit)
Site Officiel de CaPriCe Forever
 
 Nestopia - Undead Edition v1.50 FR 
Samedi 05/12/20 à 13:39 par Firebrand
La dernière version de cet émulateur NES a été traduite en français grâce à Tradu-France.
Télécharger Nestopia - Undead Edition v1.50 FR
Tradu-France
 
 Nestopia - Undead Edition v1.50 
Vendredi 04/12/20 à 15:02 par Firebrand
Cet version de Nestopia s'est de nouveau réveillée d'entre les morts! Voici les changements apportés:
Shell:

Additions:
- Added ability to output data from homebrew module (Phil Smith)

libretro:
Additions:
- Button shift option
- Input bitmask support (TwinAphex)
- Enhanced core options (TwinAphex)
- Build in NstDatabase.xml

Core:

Additions:
- Homebrew module (Phil Smith)
- Support for mapper 31 (rainwarrior)
- Support for mappers 28 and 30 (retro-wertz)
- Support for UNL-KS7031 (retro-wertz)
- Support for MMC3 Big CHR-RAM Board

Fixes:
- Deterministic Save States (creambits)
Télécharger Nestopia - Undead Edition v1.50
Site Officiel de Nestopia - Undead Edition
 
 DSP v0.18b3 (01/12/2020) (32-bit) 
Jeudi 03/12/20 à 12:34 par Firebrand
Sans changement de numéro de version, cet émulateur multi-systèmes a été mis à jour. Les améliorations sont les suivantes:
Sega VDP
- Fixed IRQ generation

Sega GameGear
- Added driver with sound
- Added Codemasters mapper

Sega Master System
- Added cart enable/disable
- Driver stop and warning if no BIOS present

Armed F HW
- Added driver for Crazy Climber 2
- Added driver for Legion
Télécharger DSP v0.18b3 (01/12/2020) (32-bit)
Site Officiel de DSP
 
 Nintendulator FR v0.985 Beta (30/11/20) 
Mercredi 02/12/20 à 13:51 par Firebrand
La dernière beta de cet émulateur NES est disponible en français grâce à Tradu-France.
Télécharger Nintendulator FR v0.985 Beta (32-bit) (30/11/20)
Télécharger Nintendulator FR v0.985 Beta (64-bit) (30/11/20)
Tradu-France
 
 Nintendulator v0.985 Beta (30/11/20) 
Mardi 01/12/20 à 13:23 par Firebrand
Une nouvelle beta e cet émulateur NES a été publiée, mais les améliorations ne sont pas connues.
Télécharger Nintendulator v0.985 Beta (32-bit) (30/11/20)
Télécharger Nintendulator v0.985 Beta (64-bit) (30/11/20)
Site Officiel de Nintendulator
 
 uCON64 v2.2.1 
Lundi 30/11/20 à 13:46 par Firebrand
Cet utilitaire qui ne servira pas à tout le monde puisqu'il permet de dialoguer avec les copieurs de cartouches et de gérer sa collection de ROMs, a été mis à jour. Les améliorations sont les suviantes:
- updated (SNES) fixed checksum calculation of SNES/Super Famicom Classic Mini SRAM data of special chip games like Super Mario RPG, Super Mario World 2 - Yoshi's Island, Hoshi no Kirby Super Deluxe and Star Fox 2 (by dbjh)
- added (SNES) --range=OFFSET1:OFFSET2 specify range for calculating checksum of SNES/Super Famicom Classic Mini (hakchi2) SRAM data. Can be used in combination with --sminis for special chip games (by dbjh)
- added (SNES) --xic2 send ROM to SMC IC2 compatible backup unit (by dbjh; thanks to Mystic_Merlin for finding this out and for testing)
- removed (PSX/N64) --xdex, because the underlying code had nothing to do with the DexDrive (by dbjh)
- added full MinGW-w64, 64-bit Visual C++ (2015 & 2019) and 64-bit Cygwin build support (including libdiscmage and libcd64); improved 64-bit support in general (by dbjh)
- libdiscmage support is no longer enabled by default. Use the configure option --with-libdiscmage to enable support (by dbjh)
Télécharger uCON64 v2.2.1 (Windows)
Télécharger uCON64 v2.2.1 (Dos)
Télécharger uCON64 v2.2.1 (Linux)
Site Officiel de uCON64
 
 kindred v1.12 Preview Build 2 
Lundi 30/11/20 à 13:33 par Firebrand
Une nouvelle version de cet émulateur multi-systèmes a été publiée. Voici la liste des changements:
- [IBM] Added Sound Blaster 2.0 DSP and DAC
- [IBM] Redirected IRQ 2 to IRQ 9 for AT class
- [IBM] Fixed a bug in AT state descriptor
- [IBM] Updated ibm\readme.txt
- [RT ] Added ROMP, MMU, IOCC and Keyboard/Locator Controller
- [X86] Updated DMA request protocol
- [C64] Rewrote 6502 core
- [ALL] Added 65C02 core
- [ALL] Added User Preferences Dialog
- [ALL] Added Virtual Devices
- [ALL] Added Audio Device options
- [ALL] Added Runtime and re-enabled folder options
- [ALL] Added option to hide/trap the windows mouse cursor
- [ALL] Added the option to save and restore the last session
- [ALL] Added more Quick Load/Save hotkeys
- [ALL] Updated Window Sizes
- [ALL] Added more config.ini options
Télécharger kindred v1.12 Preview Build 2
Site Officiel de kindred
 
 Hatari v2.3.0 
Lundi 30/11/20 à 13:30 par Firebrand
Cet émulateur Atari ST a été mis à jour. Les améliorations sont les suivantes:
Following features are deprecated and will be removed in a future release:
- Support for the SDL 1.2 library (i.e. SDL 2.x should be used instead)
- SDL 2.x "bUseSdlRenderer" config and "GPU scaling" GUI options (after HW support for SDL2 is available widely enough)
- The old UAE CPU core (i.e. the new WinUAE CPU core should be used instead)
- Python v2 support in Python scripts (Python 2 was end of life in 2020)
- The "external" disassembler (i.e. use "--disasm uae" instead)
- Hatari XBios(255) API enabled with the "--bios-intercept" option(i.e. use "--natfeats" & "--cmd-fifo" options and "hconsole" instead)
- The old ~/.hatari configuration file location (use ~/.config/hatari instead)

Emulation:
- FDC / Disk :
*Support for MegaSTE DIP switch register $FF9200 (set floppy drive to HD by default on MegaSTE/TT/Falcon)
*support for DD/HD mode on MegaSTE at $FF860E (when FDC is set to HD mode, reading DD floppies will fail)
*Support for the 'Disk Change' (DC) signal on TT machines on TT's MFP GPIP4
*Fix: IDE disks with sector size > 512 bytes
*Fix: IDE controller is now always available in Falcon mode, even if no hard disks have been configured.
- CPU:
*Update CPU core to latest WinUAE 4.4.0 beta : full support for undocument fields in 68000 bus/address error stack frames, as well as CCR flags for
most of the 680x0 instructions (using a cpu tester program on the real hardware that checks all possible opcodes' combinations)
*68030 MMU hardware bus error support + various fixes
*FPU fixes
- Video:
*Improved timing when setting Vsync signal (same place where video counter is reloaded)
*Handle screen where vertical DE signal is completely disabled
*Better start/end position for the VBlank signal at 50Hz and 60Hz
- Sound:
*Add a better filter for downsampling the internal 250 kHz signal, should
give better results when the YM2149 outputs high frequency sounds
*Fix microwire mask shifting when CPU runs > 8 MHz
- MFP :
*Rewrite MFP code to handle several MFP objects and add support for the TT's 2nd MFP (not all TT's MFP signals are emulated yet)
*Improved Falcon's DMA sound interrupt on GPIP7 and AER
- Blitter:
*Large rewrite of the blitter's core, improving cycle accuracy and handling the complex cases where xcount=1 and nfsr=1. Code is slighlty smaller and closer to the logic of the real hardware
*Handle restart in non HOG mode when the CPU uses a RMW instruction (eg TAS)
*Improve access to memory regions that would generate a bus error for the CPU
- Emulate additional RTC/NVRAM registers
- megaSTE should start at 8 MHz, not 16 MHz

Emulator:
- Miscellaneous:
*Fix: freeze at Hatari exit and RS-232 device file changes, when device file(s) are FIFO(s)
*Fix: when autostarting programs without pre-existing INF file, enable blitter also with EmuTOS
*Use floppy track's size in bytes to detect DD/HD/ED (instead of counting sectors)
*Add --lilo debug option for more convenient m68k Linux loading
- Config file handling:
*Support config file values with '=' in them
*Skip reading global config file if HATARI_TEST environment variable is set
- Memory handling:
*Memory snapshot version increase due to FDC changes (i.e. old snapshots won't work with new version)
*Accept 10MB as valid ST-RAM amount (max on real MegaSTE/TT machines) and correct invalid Falcon ST-RAM amounts
*Fix: 24-bit address mode change while emulation is running (triggered e.g. when TT-RAM is enabled for TT)
- HD images:
*Fix: run-time IDE byte swap change requires IDE re-init
*Fix: TOS booting from A: although SCSI drive was enabled
*Support read-only HD image files, and show error dialogs for image file open/lock issues
- GEMDOS HD emulation:
*Support FASTLOAD program flag with GEMDOS HD
*GEMDOS HD emulation cartridge assembly functionality is moved almost completely to emulator side. Fixes Atari side error handling when program file is not readable, and TOS stack overflows in some rare cases
*Detect DTA re-use to reduce DTA cache usage, grow cache on demand and give warning if its entries need to be re-cycled (= cache max size is reached)
*Invalid DTA in Fsnext() return -ENMFIL, like TOS does
*Fix: skip non-existing host files on FSnext() instead of returning an error (latter broke directory listings)
*Fix: Dsetpath/Dgetpath empty path handling
- Hatari graphics support:
*Low/med-rez line doubling uses less CPU and doubled lines in "TV" display mode are now drawn at half intensity, not as black (fixes TV mode being too dark)
*SDL2: "--zoom" option accepts any values between 1.0 - 8.0
*SDL2: "--zoom" option is changed to always enable low resolution doubling before SDL framebuffer is scaled up (or down) by the zoom factor. This way Hatari output window is approximately same sized regardless of emulated Atari resolution, like on a real CRT monitor
*SDL2: scale quality is selected automatically; nearest pixel for sharp output with integer scaling factors, and linear scaling to smooth out issues with non-integer scaling and window resizes
*SDL2: Now redundant "nRenderScaleQuality" config option is removed and "Linear scaling" option in GUI is replaced with the "GPU scaling" option (=bUseSdlRenderer config option)
*Added new "--screenshot-dir" option to select the folder for screenshots
*Fix: [ffmpeg/video] Invalid PNG signature 0x89504E470D0A1A
*Fix: garbage graphics (by clearing the whole render area)
*Fix: Spec512_StoreCyclePalette when using 16 or 32 MHz
- Input handling:
*Support SDL "Hat" events in addition to "Axes" events (= support 80's game controllers, also in SDL GUI)
*Map a turbofire button independent of the fire button if the game controller is capable
*Show mouse grab toggle shortcut key in startup statusbar message
*Center host mouse to Hatari window on Atari resets and resolution changes only when window is focused and mouse pointer is within it
*Fix: keypad emulation with SDL2
*Fix: simulated (socket API) key input with SDL2
- Profiler:
*Profiler backtrace shows now real caller addresses and their offsets from the function entry points (slows profiling of addresses with symbols)
*All profiler outputs have now reasonable limits (so that they don't flood console)
*Fix: exception in profile post-processor script (with symbol address aliases)
- Tracing:
*Fix: CPU disassembly trace output doesn't go to specified trace file
*Trace flags can be added and removed instead of needing to always specify all the relevant ones, both with "--trace" command line option and debugger "trace" command: --trace os_base,aes, trace +xbios,bios, trace -bios,-aes
*VDI trace shows names also for NVDI/Speedo/GDOS functions
*VDI & AES trace function numbers are shown in hexadecimals with 0x prefix like rest of the OS calls
- Debugger:
*New "screenshot" command for saving screen dump to a PNG/BMP file
*"symbols resident" option replaced with "symbols autoload" option which can be used to completely disable automatic symbol loading and unloading for programs run through the GEMDOS HD (helps debugging resident programs started from GEMDOS HD)
*Improvements to UAE and external disassembler disassembly
*UAE disassembler is now default instead of external one (latter doesn't decode all instructions correctly)
*New "info" subcommands: "acia", "dmasnd", "ikbd", "mfp", "nvram", "rtc" and "scc"
*Also UAE disassembler can now show the profile info
*"info" command can show AES & VDI information on on their respective traps without VDI mode/tracing being enabled
*Breakpoint ":info" option to call specified info function on tracing breakpoint hits (one can now use e.g. ":info vdi" on VdiOpcode breakpoints)
*Improved symbols info output
- Native features:
*Support for missing NF_SHUTDOWN (reset) sub commands
*Test code for rest of features (except for NF_SCSIDRV)
*When Hatari resets or exits due to emulated program NF_SHUTDOWN / NF_EXIT call, output user a note about that

Tools and Hatari Python/Gtk UI:
- Python scripts use now "python3" because most current distros don't anymore install Python v2 by default. To use a script with v2, change "python3" in its first line to "python2"

Building and unit tests:
- Source repository moved from Mercurial to Git
- Fix: issue with multilib capable cross-compilers
- Only Caps library v5.1 is supported (support for old v4.2 is dropped)
- Obsolete Mudflap option replaced with AddressSanitizer support
- Add tests for GEMDOS HD, fullscreen/overscan display, blitter and Hatari command FIFO + improve CPU/MMU variant coverage in earlier tests

Documentation:
- Up to date documentation provided at: https://hatari.tuxfamily.org/doc/
- New m68k-linux.txt and m68k-netbsd.txt documents on how to test m68k Linux and NetBSD under Hatari
- Debugging and profiling information is split from manual.html to a separate debugger.html file
- Minor improvements

Fixed demos:
- Pacemaker STE demo (end part), when it's run from GEMDOS HD
- Multi scrolls part in Closure by Sync (regression since Hatari 2.2, vsync in bottom border)
- Fullscreen part in Hard As Ice STE demo by I.C.E. (screen with no vertical DE signal)
- Fullast Vinner by Troed/Sync (improved vblank position, partial fix for now)
- Electric Night Falcon demo by Dune (MFP DMA sound interrupt on timer A using AER)
- Oompa by No Extra (after greetings part) (blitter access to bus error regions)
- E.K.O System (music should now play in the racing scene)

Fixed programs:
- MS Write (crash), when it's run from GEMDOS HD
- Akaisex program reading AKAI S1000 HD floppies converted to STX
- EmuTos drawing vertical lines with blitter and leaving some trails (blitter in non HOG mode using TAS intruction to restart)
- Cecile v2.22, now also works if no IDE drive has been configured
- Trans D-Bug Express by PHF (lock when running in megaSTE mode at 16 MHz)
Télécharger Hatari v2.3.0 (32-bit) (Windows)
Télécharger Hatari v2.3.0 (64-bit) (Windows)
Télécharger Hatari v2.3.0 (MacOS)
Télécharger Hatari v2.3.0 (Linux)
Site Officiel de Hatari
 
 GameEx et GameEx Arcade Edition v16.73 
Samedi 28/11/20 à 13:40 par Firebrand
Ces frontends multi-systèmes ont encore été mis à jour. Si les changements de la v16.73 ne sont pas (encore?) connus, voici ceux de la v16.72 et v16.70 publiés en retard sur le site officiel:
v16.72:
- Improved rendering performance.1080p 60fps on recent embedded hardware such as Appolo Lake Celerons.

v16.70:
- Animated PNG support.
- Fix allows Dpahne exe to have spaces in it.
Télécharger GameEx v16.73
Télécharger GameEx Arcade Edition v16.73
Site Officiel de GameEx
 
 RomVault v3.2.0 
Vendredi 27/11/20 à 13:24 par Firebrand
Ce gestionnaire des ROMs a été mis à jour. Les améliorations sont les suivantes:
- Added new Single Archive Dropdown settings to add Single Archive Types:
*Add SubDirs
*No SubDirs
*Add SubDirs if conflicts
*Add SubDirs if multiple roms
*Switched to a faster un-Deflate Stream so de-compressing zip files is now faster.
- Big speedup to the fixing report window.
- Stopped RV from trying to use chdman.exe on V1 CHD's (as chdman.exe no longer supports reading them.)
- Fixed a bug where locked (read only) directory did not set files to read only, (just the zips.)
- Fixed a bug where not all zipped files where being deleted in a fix, and a second fix was needed to delete them.
- Fixed a bug reading unicode names from zip file
- Fix a bug of DOSCenter Dat File Reader where the filename contained the word size.
- Added a try catch to Get Directory Info, to stop RomVault from crashing out if the Directory could not be accessed.
- Fix a dat reader bug where un-needed directory enteries where not correctly being removed from the DAT's while loading.
- There is also a matching Trrntzip.net update to match this release.
Télécharger RomVault v3.2.0
Site Officiel de RomVault
 
 HBMAME et HBMAMEUI v0.226A (64-bit) 
Mercredi 25/11/20 à 13:57 par Firebrand
Ces builds de MAME spécialisés dans les ROM hacks et les homebrew a été mis à jour, en relation avec les changements importants qui sont apportés à MAME. Les améliorations sont les suivantes:
- HBMAMEUI received lots of updates.

New Games
- [sf2cemix] Street Fighter II': Champion Edition (Mix 0.96)
Télécharger HBMAME v0.226A (64-bit)
Site Officiel de HBMAME
 
 WinUAE v4.5.0 Beta 11 FR 
Mardi 24/11/20 à 14:02 par Firebrand
La dernière beta de WinUAE est disponible en français grâce à Tradu-France.
Télécharger WinUAE v4.5.0 Beta 11 FR (32-bit)
Télécharger WinUAE v4.5.0 Beta 11 FR (64-bit)
Tradu-France
 
 DSP v0.18b3 (32-bit) 
Mardi 24/11/20 à 14:00 par Firebrand
Cet émulateur multi-système qui n'avait pas été mis à jour depuis près de trois ans a connu deux nouvelles versions récemment, mais uniquement pour Windows. Voici la liste des nouveautés:
v0.18b3:
General
- TMS99XX: Fixed video mode 2

Coleco
- Added Mega Cart support: ROM pagination
- Added Super Game Module support: More RAM and AY8912
- Added support for Boxxle and Black Onix (missing EEPROM)

v0.18b2:
General
- YM2203/YM2151/YM3812: Fixed (finally!) the FM sound, improves a lot Shinobi, Rastan, Ghost'n Goblins, Snow Bros...
- CPU's: Added some CPU's, many fixes and new opcodes

8bit computer
- Spectrum: 100% emulated 'floating bus', added 'Turbo sound'..
- Commodore 64: Added a initial driver

Consoles
- NES: Fixed many video issues, added many mappers...
- Sega Master System: Improved driver, almost 100% working games

Arcade
- Added some MCUs to emulate protections, added 24 new games, added dipswitches...
Télécharger DSP v0.18b3 (32-bit)
Site Officiel de DSP
 
<< Page précédentePage suivante >>
2001-2024 Planet Emulation