Organiser
Filtrer par machine :
Type de vue :
 
 RuMSX v0.83 
Mardi 05/05/20 à 13:57 par Firebrand
Cet émulateur qui n'avait pas été mis à jour depuis près de 3 ans vient de recevoir une nouvelle version. Les améliorations sont les suivantes:
- HALTED RuMSX instances did not immediately stop, if termination was attempted by using Windows TaskBar.
- Accessing missing A: or B: drive now results in the correct error "The system cannot find the drive specified."
- Fix for ASCII16-Mapper: "Vaxol" writes to invalid memory locations, which are now excluded.
- Added new "ASCII MegaROM (ASCII/16 KByte) V2" ROM-type.
- Most copies of the "Andorogynus" ROM are using the ASCII/16K-mapper.
- But a few copy copies require this special ROM-type, with switching address &H8000.
- Added new "ObsoNET" ROM-type (experimental)
- TMS9918A EC bit was mistakenly ignored (MSX1 could not shift sprites 32 pixels to the left) (e.g. affected "Actman" in MSX1-mode) z.B. affected "Actman" in MSX1-mode) e.g. affected "Actman" in MSX1-mode)
- Fixed incorrect debug-message "Virtual error reading drive", even if there was no read-error (but an error-file is present)
- VDP IE1 interrupt-flag is reset on read, even if IE1 is disabled Working (again): F-Nano 2, The Haunted Demo, ... (Bug was new since RuMSX v0.41)
- YM3802 operations always wrote debug-output to the console. (Fix improves performance of MIDI commands)
- Philips Music Composer was frozen in main-menu, due to missing ADPCM-interrupt.
- Added experimental support for extended DSK file format (using 128 Byte header and additional ending-block, often used in games from www.msxgamesbox.com)
- Improved support for DDI-images (now more DDI file-formats are supported)
- Fixed SCC+ ROM/RAM mapper.
- Fixed "Tape", "A:" and "B:" buttons: Incorrect Tab was selected if number of disk-drives was not 2. Example, if a 2nd DISK.ROM was mounted.
- Improved autodetect for many classic Konami games with SCC/SCC+ with size of 40KB (e.g. Antarctic Adventure SCC/SCC+)
- Improved autodetect for Disk-To-ROM games with size of 48KB (e.g. Confused?, Donkey Kong, Spy Vs Spy II)
- Fixed autodetect of Zoids [ASCII/16 KByte, switch address $77F8]
- Extended ROM-Database:
*Alien Syndrome [ASCII/16 KByte]
*Andorogynus [ASCII MegaROM (ASCII/16 KByte) V2]
*Harry Fox MSX Special [Hydlide 2]
*Harry Fox Yki No Maoh [Snow Demon King + patched ASCII/16 KByte]
- Improved autodect for some versions of the following ROMs:
*Aliens 2 (Zemina)
*Barbarian
*Bat Man
*Darwin 4078
*Druid
*Fishing Freak
*Humphrey
*Mon Mon Monster
*ObsoNET (experimental)
*Strategic Mars
*Syougun
*XYZ / Zukkoke Yajikita Onmitsudoutyuu
- Added experimental Dir-as-Disk feature (for MSX-DOS 1). Do not (yet) use together with SCSI or IDE controllers.
- When restoring a save-state "Sprites disabled" mode was sometimes not restored.
- When switching to MSX1 configuration sprites were sometimes permanently invisible.
- Pending SCSI configuration changes were not fully applied on reboot.
- Coincidence of transparent sprites was mistakenly detected.
- "Labirint" is now working (without cheat).
- Fixed bug in debug-log of memory mapper, sometimes refering to the wrong slot.
Télécharger RuMSX v0.83
Site Officiel de RuMSX
 
 m64p 04/05/2020 
Mardi 05/05/20 à 13:51 par Firebrand
Voici un nouveau venu sur notre site pour l'émulateur Nintendo 64: il s'agit d'une solution tout en un qui intègre l'émulateur mupe64plus, le frontend mupen64plus-gui et le plug-in grpahique GLide64. A essayer.
Télécharger m64p 04/05/2020 (Windows)
Télécharger m64p 04/05/2020 (Linux)
Site Officiel de m64p
 
 WinUAE v4.4.0 Beta 2 FR 
Dimanche 03/05/20 à 14:24 par Firebrand
La nouvelle beta de WInUAE est déjà traduite en français par l'équipe de Tradu-France.
Télécharger WinUAE v4.4.0 Beta 2 FR (32-bit)
Télécharger WinUAE v4.4.0 Beta 2 FR (64-bit)
Tradu-France
 
 WinUAE v4.4.0 Beta 2 (32-bit) 
Dimanche 03/05/20 à 14:18 par Firebrand
Une nouvelle beta pour cet émulateur Amiga a été publiée. Voici la liste des changements:
- Custom CPU frequency selection fixed (b1)
- CPU speed adjustment supported in more compatible (prefetch) CPU mode.
- 68020+ speed has changed again. Was also changed in b1.
- "uae-configuration cdimage0 ." left image partially mounted in some situations. GUI eject button always worked.
- FPU FGETMAN should ignore current rounding mode, result is always in extended precision.
- Debugger "mustchange" memwatch point flag was never cleared.
- Added misc panel enable checkbox for beta 1 introduced debug logging. Note that quickstart mode always disables it.
- BPLCON4 sprite bank selection bits have different delay than bitplane "XOR" bits. Sprites: 1 hires pixel. Bitplanes: 2 hires pixels. It was wrong previously.
- "diskchange rdh0:" can be now used to eject drag&drop mounted directory/file/archive harddrive.
- 68030 MMU with more compatible (prefetch) is not stable, at least in Amix (as usual..). Will be fixed later.
Télécharger WinUAE v4.4.0 Beta 2 (32-bit)
Télécharger WinUAE v4.4.0 Beta 2 (64-bit)
Site Officiel de WinUAE
 
 Raine v0.91.1 
Dimanche 03/05/20 à 14:11 par Firebrand
Une nouvelle version de cet émulateur multi-systèmes a été publiée. Les améliorations sont les suivantes:
- lots of hex numbers were not identified in the cheats conversion from the xml, much better now (particularly for the masks)
- cheats using watches with loops inside are now supported !
- you could not disable sound, not sure if it was for all drivers but probably. Setting emulate sound = no and then going back to the game was reseting this to yes ! I guess nobody tried to disable the sound for a very long time ! It's fixed, but notice that some games don't like to have sound disabled and you can get errors if you try to do that (in neogeo for example, you get a nice error about the z80 !).
Télécharger Raine v0.91.1 (32-bit)
Télécharger Raine v0.91.1 (64-bit)
Site Officiel de Raine
 
 Raine v0.91 
Samedi 02/05/20 à 15:15 par Firebrand
Cet émulateur multi-systèmes a été mis à jour. Les changements portent sur une importante modification des codes de triche:
Yeah yeah I know, 0.90 was supposed to be the last, but there was this mistake about cheats where I forgot the very old cheats.cfg file before realizing it was incredibly outdated...
So here is 0.91, with the xml cheats from mame converted for the raine games. The cheats are included in the binary archives of the emulators, which makes them somewhat bigger (2.2 and 2.4 Mb, which is still very small for archives nowdays !). So thanks go to puggsy and his team for the work around this, I know how long it is to find cheats at least ! I picked the colors idea from them too, I found nice to have off in red and on in green for the cheats interface ! Except that when a cheat needs a parameter, it opens its own dialog which makes a huge difference from what we had before.
There are tons of new cheats, some improve the playability of the game, try those around arkatour, or any arkanoid clone, there is one to choose the ball speed and prevent it from accelerating ever again after that, very useful to train, and you can even choose that you don't loose if you loose the ball ! (which is really the ultimate cheat in this kind of game !). The cheats are in the scripts directory. The neocd games use cheats from the scripts/neocd directory if there are some, but since there are very few there, they use those in scripts/raine if there is nothing. Some games have a different memory map in neocd, but those interested will have to test. The conversion from xml was made by a perl script, it's in the sources in git (bonus directory).
I think that's all there is to say about this one, have fun !
Oh, and there is no cheats.cfg file or neocheats.cfg file anymore because they are not needed anymore !
And I can't guarantee all the cheats will work, because I couldn't possibly test everything, but I can promise most of them will work... !
Télécharger Raine v0.91 (32-bit)
Télécharger Raine v0.91 (64-bit)
Site Officiel de Raine
 
 Nintendulator v0.985 Beta (01/05/20) 
Samedi 02/05/20 à 15:08 par Firebrand
Une nouvelle version de cet émulateur NES pour Windows a été publiée, mais les modifications ne sont pas connues.
Télécharger Nintendulator v0.985 Beta (32-bit) (01/05/20)
Télécharger Nintendulator v0.985 Beta (64-bit) (01/05/20)
Site Officiel de Nintendulator
 
 Builds de MAME v0.221 en versions 32-bit 
Samedi 02/05/20 à 15:03 par Firebrand
Les builds de MAME de Robbert ont été compilés en 32-bits par Retro Daunart pour ProgettoSNAPS.
Télécharger MAMEUI32 v0.221
Télécharger ARCADE v0.221 (32-bit)
Télécharger HBMAME v0.221 (32-bit)
Télécharger MESSUI v0.221 (32-bit)
ProgettoSNAPS
 
 Mednafen v1.24.2 
Vendredi 01/05/20 à 15:08 par Firebrand
Une nouvelle version de cet émulateur multi-systèmes a été publiée. Voici la liste des changements:
- Fixed broken support for systems without any usable OpenGL implementation available.
- Apple2: Adjust disk angle variable upon disk change, partially sanitize the disk angle variable on state load, and print out a debug error message instead of triggering an assert() in the disk reading code, to prevent Mednafen from aborting out in certain circumstances involving disk changing and state loading.
- Apple2: Added missing keyboard reading variable to save states.
- SS: Fixed a few inaccuracies with the SCSP waveform loop handling.
- SS: Added emulation of SCSP slot short waveform mode bit.
- SS: Implemented the buggy linear interpolation that occurs on the SCSP when FM is used.
- SS: Added emulation of SCSP slot EG bypass bit.
- SS: Implemented SCSP register mirroring.
Télécharger Mednafen v1.24.2 (32-bit)
Télécharger Mednafen v1.24.2 (64-bit)
Site Officiel de Mednafen
 
 Denise v1.0.8 FR 
Vendredi 01/05/20 à 15:05 par Firebrand
La version Windows de cet émulateur Commodore 64 a été rapidement traduite en français par l'équipe de Tradu-France.
Télécharger Denise v1.0.8 FR (32-bit)
Télécharger Denise v1.0.8 FR (64-bit)
Tradu-France
 
 Denise v1.0.8 
Vendredi 01/05/20 à 15:02 par Firebrand
Cet émulateur Commodore 64 qui porte son attention sur la précision de l'émulation a été mis à jour. Les améliorations sont les suivantes:
- added Retro/Nordic Replay support
- added macOS DMG installer [thanks to Retrofan for background image]
- added xInput emulation for Windows rawInput driver [XBOX Controller, xMode devices]
- fixed a few input handling bugs
- added slider for analog trigger point when using for digital inputs
- added help output in console: Denise -h
- refactored GTK2 to GTK3 for Linux port
- added hotkey to switch controller ports
- added hotkeys to trigger power and soft reset
- reworked menu structure and moved some settings in order to find them faster
- moved some global hotkeys to emulator specific hotkeys, i.e. load/save states, SID control
- reworked firmware view
- added posibillity to swap in CHAR roms during active emulation
- reworked software view
- show placeholder picture when emulator is opened but still not running an emulation [thanks to Retrofan]
- autoload for all media types with D64/T64 viewer in file dialog
- added possibility to associate files with Denise for macOS
- emulated left vertical line anomaly in overscan area
- added confirmation dialog to write on disk/tape/flash permanently
- open files as read only from OS point of view, if not able to open it in read/write mode
- added possibility to customize D64 preview box in file dialog
- improved D64 preview generation in UI to better match original
Télécharger Denise v1.0.8 (32-bit) (Windows)
Télécharger Denise v1.0.8 (64-bit) (Windows)
Télécharger Denise v1.0.8 (MacOS)
Télécharger Denise v1.0.8 (Linux)
Site Officiel de Denise
 
 QuickPlay v4.7.5 
Jeudi 30/04/20 à 13:54 par Firebrand
Ce frontend multi-systèmes a été mis à jour. Voici la liste des nouveautés:
- misc fixes for about form
- mametool fix bug when user only has one rompath in their mame.ini for all romtypes (ie: when CHDs etc are subfolders of their ROMS folder) - bug found by user sekelje
- mametool allow rompaths in mame.ini to be relative (detect relative paths, and append mame emulator path to all paths found if folder is relative) - raiseed by sekelje
- mametool fix issue discovered with Mame 220: devices do not need instances or extensions according to MAME DTD, Mametool was assuming all devices would have instances (useless without?). Remove devices without instances and additionally defensively protect use of device briefnames - bug found by sekelje
- mametool take naming of 'Acorn Computers' (MAME 220) back to 'Acorn' (QuickPlay company names try to be as simple/short as possible, if the intention was to highight a difference between well-known Acorn and another Acorn, should have renamed the other Acorn)
- romdata magician Genesis can't coexist w Genesis/32X...
- Romdata Magician GBA current system name needs bumping...
- updated repo readme
Télécharger QuickPlay v4.7.5
Site Officiel de QuickPlay
 
 FS-UAE v3.0.5 stable 
Jeudi 30/04/20 à 13:51 par Firebrand
Une nouvelle version de cet émulateur Amiga a été publiée. Pas d'information à son sujet pour le moment.
Télécharger FS-UAE v3.0.5 stable (64-bit) (Windows)
Télécharger FS-UAE v3.0.5 stable (64-bit) (MacOS)
Télécharger FS-UAE v3.0.5 stable (64-bit) (Linux)
Site Officiel de FS-UAE
 
 DCMOTO v2020.04.29 
Jeudi 30/04/20 à 13:46 par Firebrand
Cet émulateur d'ordinateur Thomson a été mis à jour. Le améliorations sont les suivantes:
- Refonte complète de l'émulation du 6846 pour respecter au mieux les spécifications malgré les simplifications.
- La sauvegarde de l'état actuel génère un fichier sdstream.sd permettant la restauration sur un vrai MO5 ou MO6.
- Correction d'une erreur de gestion du clavier TO7/70 bloquant le jeu Androides pour cet ordinateur.
- Ajout de l'émulation de l'interface SDSTREAM permettant la lecture séquentielle d'un fichier sur carte SD.
- Abandon de l'émulation du contrôleur ARDDRIVE.
Télécharger DCMOTO v2020.04.29
Site Officiel de DCMOTO
 
 Builds de MAME v0.221 
Mercredi 29/04/20 à 14:01 par Firebrand
Nous commençons à être habitués: la version officielle de MAME est en retard, mais les builds de Robbert sortent le dernier mercredi du mois avec une précision d'horloge suisse. Voici la liste des nouveautés:
ARCADE v0.221:
- None

MAMEUI/MESS/MESSUI v0.221:
- MESSUI / MAMEUI - Multipart software items will be loaded correctly via "SW Items".
- MESSUI / MAMEUI - Stability adjustments
- NewUI - If a multipart item had been loaded through MESSUI / MAMEUI / command-line, you can choose to load the other arts as needed
- NewUI - If a software-list item is loaded, you can view the usage (loading instructions), step by step as you work through the procedure.

HBMAME/HBMAMEUI v0.221:
- Metal Slug 4,5 and X the remix has been updated
- dkongl5 was renamed to dkongst (Spring Trainer)

New Games
- [captcomms86] Captain Commando (Nightmare Edition Update 2020-02-21)
- [captcomms87] Captain Commando (Unlimited Bullet Update 2020-02-19)
- [captcomms88] Captain Commando (Warlord Version 2020-03-02)
- [dinos238] Cadillacs and Dinosaurs (Three Forbidden Version 2020-03-25)
- [dinos239] Cadillacs and Dinosaurs (God of War Edition Update 2020-03-25)
- [dinos240] Cadillacs and Dinosaurs (Prosperity Enhanced Edition 2020-03-25)
- [dkongss] Donkey Kong Skip Start
- [grdianss14] Guardians (Warriors Edition 2020-02-15)
- [kof95s32] Kof'95 (Special v1.0 2020-02-22)
- [kof97s167] Kof'97 (ST Innovation 2020-01-21)
- [kof97s168] Kof'97 (Combo Enhanced Edition Simplified 2020-03-10)
- [kof97s169] Kof'97 (Evolution Ultimate Edition Simplified 2020-03-22)
- [kof97s170] Kof'97 (Come Back To The Rivers And Lakes Enhanced Version Simplified 2020-03-10)
- [kof97s171] Kof'97 (Resurgence Plus Blue Version Simplified 2020-03-07)
- [kof98hh127] Kof'98 (BC Combo Version Simplified 2020-03-21)
- [kof98hh128] Kof'98 (C Dragon Edition Simplified 2020-03-16)
- [kof98hh129] Kof'98 (Max Plus Simplified 2020-03-06)
- [kof99s102] Kof'99 (Anniversary Edition 2020-03-24)
- [kof99s103] Kof'99 (Max Plus Simplified 2020-03-15)
- [kov2h22] Knights of Valour 2 (1v3 Edition 2020-02-17)
- [kovpluss366] Knights of Valour Plus 2012 (Warriors Edition 2020-02-11)
- [kovsho186] Knights of Valour Super Heroes Plus (Yellow Hat Edition 2020-03-18)
- [kovsho187] Knights of Valour Super Heroes Plus (Warriors Edition 2020-03-13)
- [mslug3h07] Metal Slug 3 (Burst Enhanced Edition 2020-03-17)
- [mslug4hh52] Metal Slug 4 (Enemies Resetting Version 2020-02-10)
- [mslug4hh53] Metal Slug 4 (Burst Enhanced Edition 2020-03-17)
- [mslug5dh65] Metal Slug 5 (Enemy Soldiers Enhanced Version 2020-01-30)
- [mslug5dh66] Metal Slug 5 (Burst Enhanced Edition 2020-03-18)
- [mslugxz66] Metal Slug X (Enemy Soldiers Psycho Edition 2020-03-22)
- [mslugxz67] Metal Slug X (The Hungry Meteorite Edition 2020-03-22)
- [mslugxrm5s10] Metal Slug X (Big Heavy Machine Gun Flame Edition Remix 2019-11-30)(The Fallen Angels Edition 2020-03-23)
- [oldsplus25] Oriental Legend 2 (Yellow Hat Version 2020-03-20)
- [tk2h158] Tenchi wo Kurau II (Master Edition Update 2020-02-15)
- [valkyrien] Valkyrie no Densetsu (English Translation)
- [viostorms04] Violent Storm (Enhanced Edition 2020-03-24)
Télécharger ARCADE v0.221 (64-bit)
Télécharger MAMEUI64 v0.221
Télécharger HBMAME v0.221 (64-bit)
Télécharger HBMAMEUI v0.221 (64-bit)
Télécharger MESS v0.221 (64-bit)
Télécharger MESSUI v0.221 (64-bit)
Site Officiel de ARCADE
Site officiel de HBMAME/HBMAMEUI
Site officiel de MAMEUI64/MESS/MESSUI
 
 Negatron v0.100.1 
Mardi 28/04/20 à 14:13 par Firebrand
Ce frontend pour MAME (et surtout NegaMAME) a été mis à jour. Les améliorations sont les suivantes:
- Fixed a regression where opening a FileChooser dialogue box made Negatron crash on Linux.
- Fixed the Linux startup shell script of the cross-platform pack to accept early access version of Java 11+.
- Fixed a macOS bug where videos could be displayed in the top-left corner of the pane instead of the expected enlarged centered view.
- Fixed video aspect ratios to always stick to a pretty 4/3 ratio, typical of old CRTs, for video files that aren't formatted with a 16/9 ratio.
- Fixed image aspect ratios of the in-game content tabs to always stick to a pretty 4/3 ratio, typical of old CRTs, for pictures that aren't formatted with a 16/9 ratio.
- Improved Lua plugin management from the Global Configuration pane to make it compatible with MAME internal UI and Arcade64 (arcade-only MAME derivative).
- Improved favourites management by making the machine list also scroll to the selection for a fast switching between the favourites view and the normal view.
- Added a new practical feature: now Negatron remembers and launches directly on the last selection of the last session, it being a machine, a software or a favourite.
- Migrated to VLCj 4.5.2.
- Migrated to OpenJDK and OpenJFX 14.0.1.
Télécharger Negatron v0.100.1 (Windows)
Télécharger Negatron v0.100.1 (MacOS)
Télécharger Negatron v0.100.1 (Linux)
Site Officiel de Negatron
 
 AppleWin v1.29.12.0 
Lundi 27/04/20 à 13:58 par Firebrand
Cet émulateur Apple // a été mis à jour. Les améliorations sont les suivantes:
- [PR #757] Allow use of an INI-file for configuration instead of the Registry (fixes #709).
*new command line switch: -conf
- [Change #773] Added Apple II J-Plus support.
- [Bug #778] Fixed for when Joystick(s) are disabled.
- [Bug #777] Fixed Phasor speech (SSI263) to match Mockingboard (when in Mockingboard mode).
*fixes: #698 (Rescue Raiders), #753 (Bejeweled).
*also improvements to Phasor card's native Phasor mode.
- [PR #775] Debugger: Fixed so that hitting "=" in the debugger sets PC to the current cursor address.
Télécharger AppleWin v1.29.12.0
Site Officiel de AppleWin
 
 SDLMAME4Ubuntu v0.220 
Dimanche 26/04/20 à 14:31 par Firebrand
Cette version de MAME pour Linux Ubuntu a été mis à jour vers la dernière version de MAME.
Télécharger SDLMAME4Ubuntu v0.220 (32-bit)
Télécharger SDLMAME4Ubuntu v0.220 (64-bit)
Site Officiel de SDLMAME4Ubuntu
 
 GameEx et GameEx Arcade Edition v16.37 
Vendredi 24/04/20 à 14:48 par Firebrand
De nouvelles mises à jour pour ces frontends ont été publiées, mais pour ne pas changer on ne sait pas ce qui a été modifié.
Télécharger GameEx v16.37
Télécharger GameEx Arcade Edition v16.37
Site Officiel de GameEx
 
 WinUAE v4.4.0 Beta 1 FR 
Vendredi 24/04/20 à 14:21 par Firebrand
La dernière version de WinUAE est maintenant disponible en français grâce à Tradu-France.
Télécharger WinUAE v4.4.0 Beta 1 FR (32-bit)
Télécharger WinUAE v4.4.0 Beta 1 FR (64-bit)
Tradu-France
 
 Languages.ini v0.220 (1.12) 
Lundi 20/04/20 à 16:34 par Firebrand
L'annonce de mise en ligne de ce fichier permettant de trier les jeux MAME par langue a été tardive. Mais le retard etst maintenant rattrapé:
- 2020/04/07 1.12: Added 0.220 sets.
Télécharger Languages.ini v0.220 (1.12)
Site Officiel de Languages.ini
 
<< Page précédentePage suivante >>
2001-2020 Planet Emulation