Organiser
Filtrer par machine :
Type de vue :
 
 WinUAE v3.2.0 Beta 2 (32-bit) 
Vendredi 10/07/15 à 11:13 par Firebrand
Une nouvelle version beta de cet émulateur Amiga pour Windows a été publiée. Les améliorations sont les suivantes:
- Borderblanking works again (b1)
- RTL8029 received packets got sometimes stuck in receive buffer until next packet was received.
- Fixed PCI bridge unreliable interrupts in some situations.
- Added Mainhattan Data Paradox SCSI emulation.
- Added Spirit Technology HDA-506 HD controller.
- Added Elaborate Bytes A.L.F. HD controller.
- Built-in wave recording created huge files, bytes-to-write variable was never reset (3.1).
- Added Mediator 1200 autoconfig data.
- Added support for multi-function PCI devices.
- Added ES1370 from QEMU. (PCI sound card), common ES1370 based card is SB128.
- Added FM801 emulation. (PCI sound card).
- Added Vortex System 2000 HD controller.
- 68020/030 prefetch/cycle-exact: don't prefetch from old PC if instruction is going to branch.
- Accelerator board memory size reset when viewing RAM GUI panel if accelerator used "Blizzard" RAM type.
- HD and RTG boards are now named ().
- A2410 display card emulation! TMS34010 emulation core from MAME.

A2410 notes:
- Very strange display board.. Very flexible TMS34010 CPU on board, code uploaded to internal RAM from Amiga-side. Unfortunately board never had good software support.
- Current WinUAE direct RTG system requires Amiga-side mapped VRAM, but because A2410 does not have any linear mapped Amiga-visible VRAM, A2410 internal VRAM is "fake" mapped at 0xa00000 (normally unused CIA space). It shouldn't cause any problems.
- Interlaced modes are not supported (Original code didn't support it all, I added quick hack that doubles height in interlaced modes), either CGX4 driver is wrong or TMS34010 documentation is wrong, documentation says "The size of the DUDATE increment specified for an interlaced display should be twice that required for a noninterlaced display of the same dimensions" but CGX4 driver uses same width value in both interlaced and non-interlaced 1024*768 mode.
- BT458 RAMDAC Overlay bitplanes fully emulated, including blinking features.
- CGX4, Amix, NetBSD console and demo programs from DevCD (Milan 1991 DevCon) confirmed working.
- END+F9 can be used to manually switch between native and A2410 display.
- CGX4 driver seems to have bug in overlay (mouse pointer) color setup routine.
- Emulated Amiga randomly hangs when switching CGX display modes. Reason unknown.
- TMS34010 CPU execution speed is probably totally wrong and very random.
- Because TMS34010 can update any register or RAM data any time it wants (like copper but more flexible), emulation needs to be at least line-based (not frame like other RTG boards) and because emulation also needs to execute TMS34010 code, A2410 emulation is slower than other RTG boards.
- A2410 has DMA and hardware byte swap circuitry (can be seen in schematics) but so far I haven't found programs that use it. (A2410 DMA = TMS34010 CPU can directly access Amiga address space).
- Must use 32-bit host display depth. 16-bit is not supported.

Mainhattan Data Paradox SCSI:
- Parallel port to SCSI adapter.
- Non autoboot.
- Make sure no other parallel port devices are enabled at the same time.

Spirit Technology HDA-506:
- Supports autoboot but it is not implemented, ROM dump not available.
- OMTI controller, uses early SCSI-like protocol but addressing uses CHS instead of LBA.

Elaborate Bytes A.L.F.:
- Non autoboot.
- MFM/RLL controller.
- Same protocol as HDA-506 but there can be differences in some commands.

Vortex System 2000:
- Supports autoboot but ROM image is not available.
- Non autoconfig, ROM and IO hardwired at 0xf00000.
- Again same protocol as HDA-506.
- Fake DMA, 2xword data port size. Some sites incorrectly lists it as a DMA controller.
Télécharger WinUAE v3.2.0 Beta 2 (32-bit)
Site Officiel de WinUAE
 
 RetroArch v1.2 R2 (32-bit) 
Mardi 07/07/15 à 09:10 par Firebrand
Une nouvelle version de cet ensemble d'émulateurs a été publiée, mais seulement pour Windows pour l'instant. Voici la liste des nouveautés:
- mac builds should be coming this sunday
- cores aren't included anymore, you can use the built-in core updater to fetch cores
- assets can be updated from within the application on PC and mobile
- content can be downloaded from within the application, we're testing this with Game&Watch
- input binding is done completely from within the applicataion
- per-core/per-game remapping are available from within the application
- per-core/per-game configuration overrides are now possible
- sort saves and savestates in folders automatically
- movie recording can be enabled from within the application
- content can now be scanned to create collections
- lots more...
Télécharger RetroArch v1.2 R2 (32-bit)
Site Officiel de RetroArch
 
 GLideN64 vPublic Release 1.2 
Mardi 07/07/15 à 09:02 par Firebrand
Ce plug-in vidéo pour émulateurs Nintendo 64 a été mis à jour, mais son auteur n'est pas très précis sur les changements apportés:
- Bugfix release.
Télécharger GLideN64 vPublic Release 1.2
Site Officiel de GLideN64
 
 GameEx v14.12 
Mardi 07/07/15 à 08:59 par Firebrand
Une nouvelle version de ce frontend a été publiée. Les améliorations sont les suivantes:
- This release of GameEx brings a new GameEx online repository to the feature list with a new
repository manager utility which replaces the plugin manager along with new extensions to the Setup Wizard.
- The GameEx repository is an online file database offering extensions, themes and other files via an API.
- The official GameEx repository is hosted with the forums utilising the download section and provides version control, HTML descriptions, reviews, ratings and author information.
- Downloads and updates to any files are automatically made available to the setup wizard and the new repository manager utility.
- This is an important step on the road to GameEx Evolution where we hope to have much more content shared in the repository submitted by you.
- You can submit your themes and other content to the repository at any time and also provide version updates. In the future we may offer a store for you to sell your content along with support for third party repositories.
- Free registration is required for access to the downloads in the repository and some files require an active subscription.
Télécharger GameEx v14.12
Site Officiel de GameEx
 
 Highscore.dat (unofficial) v03/07/2015 
Dimanche 05/07/15 à 13:04 par Firebrand
Une nouvelle version de ce fichier additionnel pour MAME a été publiée. Probablement de nouveaux jeux supportés et un alignement des sets sur MAME v0.163.
Télécharger Highscore.dat (unofficial) v03/07/2015
Site Officiel de Highscore.dat (unofficial)
 
 Mame Classic v7.4.0 
Dimanche 05/07/15 à 12:58 par Firebrand
Ce frontend pour MAME a été mis à jour. Les améliorations sont les suivantes:
- Added : A small clickable graphic in the upper right of the game lists that will rotate through the lists
- Added : Several OpenGL options
- Changed : Parts of the interface are now "flat" for a more modern look
- Fixed: : Favorite list would error on loading
Télécharger Mame Classic v7.4.0
Site Officiel de Mame Classic
 
 MAMEUI32 v0.163 
Dimanche 05/07/15 à 12:56 par Firebrand
La version 32-bit (non officielle) de la v0.163 de cet émulateur vient d'être publiée.
Télécharger MAMEUI32 v0.163
Site Officiel de MAMEUI32
 
 Pasofami v2.21 
Dimanche 05/07/15 à 12:55 par Firebrand
Ce vénérable émulateur de consoles Nintendo 8/16-bit a été mis à jour. Comme depuis toujours le site officiel est en japonais et j'ignore quelles modifications ont été apportées.
Télécharger Pasofami v2.21
Site Officiel de Pasofami
 
 Steem SSE v3.7.2 
Mercredi 01/07/15 à 09:29 par Firebrand
Une nouvelle version de cet émulateur Atari ST a été publiée. Les améliorations sont les suivantes:
Features:
- HFE images support
*This is the file format of HxC floppy emulator.
*Copy file HFE_boot.bin to your Steem directory for new disk image creation (though you may use already existing images converted with HxC software).
- Improvements in SCP images support
*Ghost disks
*ID around index pulse (I Ludicrus)
*Simpler system for weak bit protections
- Support for 7Z, BZ2, GZ, TAR, ARJ compression formats
*The feature uses ArchiveAccess.dll, which you need to copy to your Steem or system directory.
*The included DLL has been fixed by you know who so that it also works with BZ2 files.
*You still need unzipd32.dll and unrar.dll for ZIP and RAR archives.
- New option for crisp Direct3D fullscreen rendering
- Links updated in general info; don't forget to copy steem.new (feel free to delete the silly brags and mean-spirited Chuck Norris jokes...)

Bugfixes:
- Bugfix MFP spurious interrupt on STOP after CLR int. mask (Return STE -HMD)
- Bugfix fail to properly remove previous disk image on some insertions:
could explain some strange bugs, when two disks are in the same drive it
can't be good...
- Bugfix WD1772 writing data bytes with missing clock bit on Format
Télécharger Steem SSE v3.7.2
Site Officiel de Steem SSE
 
 MAME Plus! XT v0.163 r5258 
Mercredi 01/07/15 à 09:25 par Firebrand
La version XT de MAME Plus a été mise à jour ave les dernières sources de MAME.
Télécharger MAME Plus! XT v0.163 r5258
Site Officiel de MAME Plus! XT
 
 WinUAE v3.2.0 Beta 1 FR (32-bit) 
Mardi 30/06/15 à 09:10 par Firebrand
Tradu-France vient de publier la version française de la dernière beta de WinUAE.
Télécharger WinUAE v3.2.0 Beta 1 FR (32-bit)
Site Officiel de WinUAE
 
 SDLMAME v0.163 
Dimanche 28/06/15 à 10:36 par Firebrand
Ce build de MAME pour MacOS a été mis à jour avec les dernières sources de MAME.
Télécharger SDLMAME v0.163
Site Officiel de SDLMAME
 
 Cheat.dat v0.163 
Samedi 27/06/15 à 13:02 par Firebrand
Ca faisait longtemps qu'une version récente de cette collection de codes de triches n'avait pas vu le jour. C'est maintenant chose faite et elle contient désormais des codes pour les machines domestiques issues de MESS:
- Update for the latest MAME.
- Note, with this release the MAME cheat file no longer just contains cheats for arcade games it also contains cheats for the softwarelist based home computer/console systems formerly solely part of MESS. There is at least a 'placeholder' cheat file for every individual softwarelist entry, though there are actual varying numbers of cheats for games in the advision, arcadia, coleco, gamegear, gamepock, jaguar, lynx, megadriv, megatech, neogeo, nes, nes_ade, pce, pv1000, pv2000, samcoupe_flop, sgx, stv, sv8000, tg16 & vii software lists. There are long-standing issues with slot ROM cheats in the former solely MESS systems so only RAM cheats will currently work in those systems - so if any cheat does not operate as described it is likely for that reason; so please do not send/post bug reports for ANY softwarelist game.
Télécharger Cheat.dat v0.163
Site Officiel de Cheat.dat
 
 Kawaks v1.64 FR 
Samedi 27/06/15 à 12:59 par Firebrand
La dernière version de cet émulateur arcade a déjà été traduite en français par l'équipe de Tradu-France.
Télécharger Kawaks v1.64 FR
Tradu-France
 
 Mednafen v0.9.38.5 (32-bit) 
Samedi 27/06/15 à 12:58 par Firebrand
Cet émulateur multi-systèmes a été mis à jour. Les améliorations sont les suivantes:
- PSX: Generate a seek error when trying to read audio sectors(when the appropriate Mode bit isn't set), and generate a bad command error when executing ReadN/ReadS with a non-PS1 disc. Fixes a lockup in "Vib Ribbon" when trying to play with audio CDs.
- Altered SHA-1 and SHA-256 test code to work around a preprocessor-related bug in gcc.
- NES: Fixed a mapper 19 sound emulation bug; fixes music issues in the Japanese release of "Rolling Thunder".
- PSX: Replaced a GPU debug puts() with code that respects the psx.dbg_level setting.
- PC-FX: Corrected handling of width/height of 0xA for KING BG1-3, per tests on a PC-FX. Fixes a graphical glitch in "Sakuraigar Mode" in "Tyoushin Heiki Zeroigar".
- PSX: Added some debug messages to the memory card emulation code, outputted when setting psx.dbg_level is set to certain values.
- PCE, PCE_FAST: Corrected decimal-mode ADC and SBC behavior(especially for "illegal" input values), per tests on a HuC6280.
- Added a test to tests.cpp for gcc bug #60196(triggered with non-default optimization flags).
- Added a missing dependency statement to configure.ac, whose absence broke compilation with --disable-pce --enable-pcfx
- WonderSwan: Removed erroneous constraints that were preventing opposing X* and Y* buttons from being pressed simultaneously, and changed the names of the the X* and Y* buttons used during input configuration, per tip from trap15.
Télécharger Mednafen v0.9.38.5 (32-bit)
Site Officiel de Mednafen
 
 WinUAE v3.2.0 Beta 1 (32-bit) 
Samedi 27/06/15 à 12:54 par Firebrand
Un nouveau cycle de beta commence pour WinUAE. Voici la longue liste des nouveautés pour cette première mouture:
- Emulated sprite undocumented special case, sprite start hpos from 2 to 9 will be visible at the very far right overscan border of display.
- WinPCap network mode didn't detect any devices (broken some time ago)
- ROM type configuration for expansion sub devices. SupraDrive A2000 DMA does not anymore list incompatible AMABx ROMs. (A2000 DMA model ROM is still MIA)
- Improved SCSI/IDE controller init log messages.
- Fastlane and Z3 RAM configured: use Fastlane Z3 RAM autoconfig data.
- Handle recursive default_xlate() calls, can happen if autoconfig mapping is really bad.
- Accelerator with GVP Series II SCSI controller + GVP Series II SCSI expansion controller combination didn't work.
- Accelerators that include autoconfig RAM (Only GVP A530 currently) now include matching RAM autoconfig parameter data.
- WASAPI audio init may have caused crash if some WASAPI query functions returned error code.
- Implemented support framework for PCI bridges.
- dm debugger command shows PCI bridges and PCI boards.
- Added DKB Wildfire accelerator board.
- Check and halt if any illegal autoconfig remap is done. (Instead of causing pointless reset loop)
- Added support for ECS Denise genlock features. (Did any program ever use ECS genlock features?)
- Expansions boards without ROM now have simple enable/disable checkbox.
- PCI Realtek 8029 added from QEMU (NE2000 clone), automatically connected to any enabled PCI bridge.
- Moved accelerator and expansion board GUI items to new Expansions panel. Old Expansion panel is now RTG settings only panel.
- More 68030 data cache emulation fixes.
- Added generic SASI (SCSI predecessor) controller emulation and SASI HD GUI selection.
- Added Tecmar T-Card/T-Disk expansion/SASI HD controller.
- Added Xebec 9720H HD controller.
- Audio period modulation with zero period value stopped modulated channel.
- Blizzard 1230IV default ROM was incorrect.
- If no physical/virtual CD drives available and image drive was not manually selected: automatically select empty image drive. Previously emulated drive was removed.
- Blizzard SCSI Kit IV configuration weirdness fixed, old config is not compatible anymore.
- SSE2 capable CPU is now required.
- If you use WINE, 1.7.44 or newer required.
- Files are now 7zip compressed.

New Most Pointless Feature Ever:
- Genlock emulation can now replace transparent pixels with noise pattern or static image.
- Implements also ECS new genlock features (I still think there is no software that uses them..)
- Transparency control.

DKB Wildfire:
- Interesting design, SCSI and ethernet chips are connected to internal PCI bus that boot ROM initializes. (Reason why PCI bridge emulation had to exist first. This actually was the original trigger for PCI bridge emulation implementation, simple, extremely easy to do tests, only needed to start emulation and results were visible in 1 second!)
- SCSI is emulated, uses same QEMU 53c895 emulation as CSPPC.
- Ethernet is not emulated.
- Boot ROM is stored in 2*32k parallel EEPROM chips. Wildfire flash update program supported but but modified data is not saved back to rom image file.
- ROM image is from install disk.
- Boot menu (keep right mouse button pressed while booting) options are not yet saved to file, it looks like it is saved to 3rd(!) Flash/EEPROM chip via 53C815 built-in ROM support circuitry. High resolution image of the board is needed.
- Board config space ($ffff0000) bits are not emulated, except 68000 mode which only halts the emulation.

PCI bridges:
- Wildfire with 53C815 chip connected to first internal PCI slot.
- Prometheus.
- G-REX. NOTE: only supported by latest 44.71 CSPPC/BPPC boot ROM.
- Mediator 1200TX and 4000MK2. (If you have other model, please contact me)
- Only 53C815 (Wildfire only) and Realtek 8029 PCI devices implemented so far.

Try not to ask non-emulation related PCI bridge questions (like which driver to use, where to find them, how to install them, how to configure 8029 driver and so on..), thanks.

Tecmar T-Card/T-Disk:
- The very first Amiga harddrive controller.
- No autoboot, no automount, no RDB.
- KS 1.0 and 1.1 compatible, possibly also earlier version. Not KS 1.2+ compatible.
- SASI controller, make sure SASI drive type is selected.
- Implements old style autoconfig that was documented in first HRM revision, Appendix_G, Disk based autoconfig driver ("xbus.resource"). Not compatible with KS 1.2+ ROM based expansion.device. Possibly the only released hardware with old style autoconfig.
- Memory board emulated (Use second fast ram slider, autoconfig must be disabled).
- Clock emulated.

Xebec 9720H:
- Another very early Amiga harddrive controller.
- No autoboot, no automount, no RDB, SASI.
- Not autoconfig, hardwired at $600000.
- 5380 based, on-board 16k SRAM, 5380<>SRAM DMA. SRAM<>CPU PIO.
Télécharger WinUAE v3.2.0 Beta 1 (32-bit)
Site Officiel de WinUAE
 
 ROMs Kawaks v1.64 
Vendredi 26/06/15 à 21:47 par Reeko
Cela faisait longtemps que cet émulateur multi-arcade n'avait pas été mis à jour. C'est désormais chose faite et vous trouverez sur le site le set complet avec tous les sets reconnus.
ROMs Kawaks
 
 MAME ROMs v0.163 
Vendredi 26/06/15 à 15:08 par Reeko
La rubrique MAME a été mise à jour selon la dernière version de l'émulateur.
Rubrique MAME
 
 Category.ini v1.63 
Vendredi 26/06/15 à 10:11 par Firebrand
Ce fichier permettant de trier les systèmes émulés par MESS en différentes catégories a été mis à jour pour MAME/MESS v0.163.
Télécharger Category.ini v1.63
Site Officiel de Category.ini
 
 Version.ini v0.163 (MAME) 
Vendredi 26/06/15 à 10:09 par Firebrand
Ce fichier, qui existe aussi pour MESS, permettant de classer les jeux par numéro de version de l'émulateur a été mis à jour avec les nouveaux sets de MAME v0.163.
Télécharger Version.ini v0.163 (MAME)
Site Officiel de Version.ini
 
 Messinfo.dat v9.14 (MAME/MESS v0.163) 
Vendredi 26/06/15 à 09:57 par Firebrand
Ce fichier regroupant des informations sur les jeux MESS a été mis à jour. Voici les nouvelles données:
- 9.14 25/06/2015: Aligned files to 0.163 version. Updated this files: 'sourcechanges.txt', 'changelog.txt', 'alltimesMESS.txt', 'Drivers SVN...txt', 'supportedMEDIA.txt' and 'Index of Devices'. Updated the SVN until June 24, 2015 (r39030).
- 9.13 22/06/2015: Added many authors (86% right); fixed various typo errors.
- 9.12 21/06/2015: Updated the SVN until June 21, 2015 (r38709).
Télécharger Messinfo.dat v9.14 (MAME/MESS v0.163)
Site Officiel de Messinfo.dat
 
<< Page précédentePage suivante >>
2001-2024 Planet Emulation