Organiser
Filtrer par machine :
Type de vue :
 
 WinUAE v4.0.0 Beta 5 
Mardi 24/04/18 à 13:04 par Firebrand
Le train Toni Willen est lancé à pleine vitesse et on ne l'arrête plus. En effet, voici encore une nouvelle beta de WinUAE. Les changements du jour sont les suivants:
- Single scan line off by one fix in lagless vsync, frames+ mode now works correctly without static horizontal lines.
- Single slice lagless vsync had blank display (b4)
- Automatic scaling and some other scaling modes had very strange corrupted display in lagless vsync mode. Some small tearing is still possible if scaling is large enough.
- END+F9 lagless vsync debug mode now also adds small flickering markers that show where Amiga-side slices are positioned (Optimally they should be in the middle of large color bars). Switching screen modes does not anymore automatically disable debug colors.
- Reduced amount of data copied in lagless vsync if null filter or d3d shader is enabled.
- Overlay leds (b2) are now also supported in D3D9 mode.
- BPLCON1 delay logic fix when single scanline had at least one odd plane delay not equaling even plane delay and then one or more odd == even delays. (Very rare situation)
- Debugger fa command didn't find anything.
- Disassembler crashed if it disassembled FMOVECR instruction and statefile was loaded without enabled FPU.
- Switching from non-cycle exact to cycle exact mode stopped interrupts if only single INTENA interrupt was enabled.
- Moved CDTV SRAM from Advanced chipset to Expansions and added size selection.
Télécharger WinUAE v4.0.0 Beta 5 (32-bit)
Télécharger WinUAE v4.0.0 Beta 5 (64-bit)
Site Officiel de WinUAE
 
 WinUAE v4.0.0 Beta 4 FR 
Dimanche 22/04/18 à 13:16 par Firebrand
La dernière version de WinUAE est maintenant disponible en français grâce à Tradu-France.
Télécharger WinUAE v4.0.0 Beta 4 FR (32-bit)
Télécharger WinUAE v4.0.0 Beta 4 FR (64-bit)
Tradu-France
 
 WinUAE v4.0.0 Beta 4 
Dimanche 22/04/18 à 13:13 par Firebrand
Une nouvelle beta de cet émulateur Amiga a été publiée. Les améliorations sont les suivantes:
- Show only every 10th frame in D3D11 warp mode. For some reason Present() blocks if rate is higher than current max monitor refresh rate, not even DXGI_PRESENT_ALLOW_TEARING or DXGI_PRESENT_DO_NOT_WAIT help.
- Normal windowed D3D11 vsync mode should work correctly again.
- Default WASAPI audio device now follows Windows default audio device if default gets changed and emulation is already running.
- Renamed new low latency vsync to official "Lagless VSYNC (Beamraced)".
- Flip first slice early, before vblank (Early flip won't cause tearing as long as it happens during last slice). This should fix tearing in topmost slice when flip gets delayed (which for some unknown reason seems to regularly happen if flipping is done during vblank). This change makes last debug color bar shorter which is normal.
- Use NtDelayExecution and ZwSetTimerResolution (if available) for sub 1ms delays in non-fastest possible CPU low latency vsync modes.
- Replaced FastLane ROM with full 32k dump.
- Emulated (partially) C-Ltd Kronos.
- Removed CDTV SCSI from Advanced Chipset. It is optional hardware module and should be only in Expansion panel. Old CDTV SCSI configured config files are still supported but this and future versions won't write old CDTV SCSI config file entry to config file anymore.

C-Ltd Kronos:
- 5380 based SCSI controller with buffer RAM.
- Boot ROM added ("CLtd RomBoot 3.4, Copyright 1989, Wayne E. Miller")
- Boot ROM is only small driver loader from drive's custom partition table.
- SCSI settings are stored in 256 bit 93C06 serial EEPROM. EEPROM is emulated but data is static (boot enabled, SCSI ID=7)
- Install disk is MIA: Emulation is not yet complete, for example buffer RAM/fake DMA is not emulated.

Lagless VSync still does not support autoscale or other scaling options. Amiga overscan display height must still match (mostly) monitor height.

VariableSpeedLowRes in the zone can be used for tearing testing.
Télécharger WinUAE v4.0.0 Beta 4 (32-bit)
Télécharger WinUAE v4.0.0 Beta 4 (64-bit)
Site Officiel de WinUAE
 
 AQZ Netplay Input Plugin v0.22 
Vendredi 20/04/18 à 13:05 par Firebrand
Ce plug-in premettant de jouer en ligne avec Project64 a été mis à jour. Une seule amélioration est à signaler:
- Show the latency of each user in the user list
Télécharger AQZ Netplay Input Plugin v0.22
Site Officiel de AQZ Netplay Input Plugin
 
 WinUAE v4.0.0 Beta 3 FR 
Vendredi 20/04/18 à 12:57 par Firebrand
La dernière beta de WinUAE a été traduite en français grâce à Tradu-France.
Télécharger WinUAE v4.0.0 Beta 3 FR (32-bit)
Télécharger WinUAE v4.0.0 Beta 3 FR (64-bit)
Tradu-France
 
 WinUAE v4.0.0 Beta 3 
Jeudi 19/04/18 à 12:19 par Firebrand
Une nouvelle beta pour cet émulateur Amiga a été publiée. Voici la liste de nouveautés:
- New low latency vsync should now work under Windows XP, D3D9 only.
- Added ICD AdSCSI ROM with icddisk.device v33.0 (unknown ROM version, most likely v2.0 or v2.1) and v34.0 (v2.2 ROM version)
- Added MacroSystem DraCo v1.3 Boot ROM. Set it as extended ROM, A3000 KS 3.1 as normal ROM. (Boots and hangs like Casablanca)
- Fixed MOVE16 debugger disassembly.
- Fixed HDF/directory harddrive unit number conflict (if directory was between HDFs in harddrives list) introduced in b1.
- Fixed randomly occurring timing issue. Reported refresh rate suddenly increased and it looked like warp mode was activated.
- Full-window mode is now supported in virtual multi monitor mode. Native mode window opens on selected monitor, next virtual monitor opens on following real monitor and so on (or on top of existing window if not enough real monitors)
Télécharger WinUAE v4.0.0 Beta 3 (32-bit)
Télécharger WinUAE v4.0.0 Beta 3 (64-bit)
Site Officiel de WinUAE
 
 QuickPlay v4.6.1 
Mercredi 18/04/18 à 12:51 par Firebrand
Ce frontend multi-système a été mis à jour. Les améliorations sont les suivantes:
- update file exts and systems dat for new users
- Many urls corrected in efinds by 8-Cyo
- added more of 8-cyo's major updates to efinds and system file extensions
- added major efind contribs from 8-Cyo
- minor updates to RetroArch efind
- when user runs MAMEtool, remove old and boring MAME system names that might be in the users systems.dat
- make all nes and snes loader cart media calls work
-added some hardcoded choices for softlist emulators for MAME after much manual testing
- extend loader calls to deal with MAMEname conflicts between devices
- add exception list to loader calls to cope with e.g.: Thomson systems requirements
- extend loader insertions to clone systems
- add loader-insertion calls to MAME systems i.e.: where a basic cart needs calling before a floppy game
- change relationships of MAME systems: eg: Tomson series and fm8,fm7
- remove more MAME non-game system types: e.g.: card games and calculators
- refresh MAME system types e.g.: tests prove electron is more similar to bbc than atom
Télécharger QuickPlay v4.6.1
Site Officiel de QuickPlay
 
 NPlayers.ini et NPlayers32.ini v0.196 
Mardi 17/04/18 à 12:50 par Firebrand
Ces fichiers permettant de trier les jeux MAME par nombre de joueurs dans les interfaces types MAMEUI ou les frontends ont été mis à jour pour MAME v0.196.
Télécharger NPlayers.ini v0.196
Télécharger NPlayers32.ini v0.196
Site Officiel de NPlayers.ini
 
 Hoxs64 v1.0.9.9 FR 
Mardi 17/04/18 à 12:48 par Firebrand
La dernière version de cet émulateur Commodore 64 a été traduite en français par l'équipe de Tradu-France.
Télécharger Hoxs64 v1.0.9.9 (32-bit) FR
Télécharger Hoxs64 v1.0.9.9 (64-bit) FR
Tradu-France
 
 Hoxs64 v1.0.9.9 
Lundi 16/04/18 à 13:04 par Firebrand
Cet émulateur Commodore 64 a été mis à jour. Une seule amélioration est au programme:
- New joystick configuration and fixes. Multiple host game device buttons can be assigned to a C64 joystick function.
Télécharger Hoxs64 v1.0.9.9 (32-bit)
Télécharger Hoxs64 v1.0.9.9 (64-bit)
Site Officiel de Hoxs64
 
 WinUAE v4.0.0 Beta 2 FR 
Dimanche 15/04/18 à 14:32 par Firebrand
On n'aime pas attendre chez Tradu-France: la traduction en français de la dernière beta de WinUAE est déjà disponible!
Télécharger WinUAE v4.0.0 Beta 2 FR (32-bit)
Télécharger WinUAE v4.0.0 Beta 2 FR (64-bit)
Tradu-France
 
 WinUAE v4.0.0 Beta 2 
Dimanche 15/04/18 à 14:30 par Firebrand
Une nouvelle beta pour cet émulateur Amiga qu'on ne présente plus a été publiée. Voici ce qu'elle propose:
- New low latency vsync tweaks and updates.
- If low latency vsync polling takes longer than 2 vblanks, exit immediately to prevent total hang if scanline reads return unexpected and weird values.
- Display panel "native" resolution returned non-existing mode which got fixed to smallest supported resolution.
- Fixed clipboard sharing.
- Fixed graphics corruption (black lines/tearing) in new low latency mode with Vertical centering enabled.
- Added overlay led support. Led overlays must have same resolution as main overlay file, fully transparent color except location of led. Name must be _x_led.png where x = power,df0,df1,df2,df3,hd,cd,md,net (md = flash/eeprom access, for example cd32 nvram) Currently D3D11 only.
- MMU emulation works again (at least 68030 was broken)
- If low latency vsync and DSOUND: switch to WASAPI. New low latency vsync needs "pull" mode audio driver.
- Added new misc panel option, asks for confirmation when trying to close emulation window using close button or ALT+F4/CTRL+F11.
- Fixed Output panel crash if capture before filtering was set.
Télécharger WinUAE v4.0.0 Beta 2 (32-bit)
Télécharger WinUAE v4.0.0 Beta 2 (64-bit)
Site Officiel de WinUAE
 
 My Nes v7.2.6677 (32-bit) 
Dimanche 15/04/18 à 14:28 par Firebrand
Cet émulateur NES a été mis à jour. Voici les nouveautés:
- My Nes old GUI is back, along side with the Launcher.
- Fixed issues in the emu core.
Télécharger My Nes v7.2.6677 (32-bit)
Site Officiel de My Nes
 
 mGBA v0.6.3 
Dimanche 15/04/18 à 14:26 par Firebrand
Une nouvelle version de ce très bon émulateur GameBoy/GameBoy Advance a été publiée. Les améliorations sont les suivantes:
A new release of mGBA, version 0.6.3, is available. This version is a bugfix release to address some major audio and video regressions that snuck into 0.6.2. As such, all users of 0.6.2 are encouraged to update, especially if they are playing Game Boy games.

Bugfixes:
- GB Audio: Revert unsigned audio changes
- GB Video: Fix bad merge (fixes #1040)
- GBA Video: Fix OBJ blending regression (fixes #1037)
Télécharger mGBA v0.6.3 (Windows)
Télécharger mGBA v0.6.3 (MacOS)
Télécharger mGBA v0.6.3 (Linux)
Télécharger mGBA v0.6.3 (Nintendo 3DS)
Télécharger mGBA v0.6.3 (Nintendo Wii)
Télécharger mGBA v0.6.3 (PS Vita)
Site Officiel de mGBA
 
 AppleWin v1.27.2.0 
Vendredi 13/04/18 à 13:37 par Firebrand
Cet émulateur Apple // a été mis à jour. Les améliorations sont les suivantes:
- [Change #522] SSC: Support ACIA's TX Empty interrupt for both COM and TCP modes.
- [Change #311] SSC: Support ACIA's CTS/RTS.
- [Bug #308] Fixed TCP mode which was only generating an IRQ for first byte received.
- SSC: Fixed reading DIPSW registers.
- SSC: Support ACIA's Program Reset (write to register 9).
- SSC: Improved logging for unsupported modes (Echo, Tx break signal).
Télécharger AppleWin v1.27.2.0
Site Officiel de AppleWin
 
 GameEx et GameEx Arcade Edition v15.25 
Lundi 09/04/18 à 13:06 par Firebrand
Une nouvelle version de ces frontends a été publiée, mais la nature des modifications n'est pas connue.
Télécharger GameEx v15.25
Télécharger GameEx Arcade Edition v15.25
Site Officiel de GameEx
 
 WinUAE v4.0.0 Beta 1 FR 
Lundi 09/04/18 à 12:39 par Firebrand
La version traduite en français du nouveau WinUAE est déjà disponible grâce à Tradu-France.
Télécharger WinUAE v4.0.0 Beta 1 FR (32-bit)
Télécharger WinUAE v4.0.0 Beta 1 FR (64-bit)
Site Officiel de WinUAE
 
 WinUAE v4.0.0 Beta 1 
Lundi 09/04/18 à 12:36 par Firebrand
Lorsque Toni Willen se fait discret pendant quelques temps, ça ne signifie généralement pas qu'il se repose mais qu'il prépare du lourd. Cela se vérifie encore avec la sortie d'une nouvelle série de beta pour une version majeure de WinUAE. Voici ce que cette v4 commence à nous proposer:
- Huge graphics subsystem rewrite to support multiple virtual monitors.
- Lagless vsync.
- New debugger.

If any existing configuration that works with 3.6.1 crashes or works strangely, attach config and winuaelog.txt, thanks. Do not attempt to "fix" it by adjusting config!

Changelog:

Lagless Vsync:
- Previous discussion: http://eab.abime.net/showthread.php?t=88777&page=8
- Implemented lagless vsync mode (https://www.blurbusters.com/blur-bus...or-developers/)
- Replaces old low latency vsync mode.
- What does it do? It reduces input latency from usual 20ms-40ms+ to less than 5ms! (or even less)
- Current limitations:
*Does not support black frame insertion or frame doubling = use only standard 50Hz or 60Hz modes. (or up to 85Hz or so )
*Native mode only. Cycle-exact/approximate/fastest possible/JIT supported.
*Direct3D 9 and 11 only.
*Fullscreen only.
*Amiga display to monitor position mapping must be border to border vertically (or close enough) or you may see tearing lines.
*Does not gain anything from G-Sync.
- Current features:
*Input is read after each slice.
*Default is 4 slices (adjustable in GUI) which makes max input latency about 6ms. (Assuming quality "gaming grade" USB input devices that use <=1ms USB rate.)
*Because output is shader based, outputting each slice requires full render pass each time. It technically means same as rendering screen 4 times the frame rate. (for example 50Hz output requires rendering 200 frames) -> don't enable any extra shaders unless you have powerful GPU. Most likely requires GPU with on-board RAM (discrete GPU) because this mode increases VRAM bandwidth requirements heavily. Or reduce resolution.
*END+F9 toggles debug colors when in low latency vsync mode (In normal modes END+F9 changes screens). When debug colors are disabled, useless screen clearing before each slice rendering is also disabled.

Multi virtual Amiga monitor support:
- Enables multiple virtual Amiga monitors. Amiga monitor = single WinUAE window.
- Default mode is unchanged, highest priority Amiga display output appear in single WinUAE window, switches automatically or manually (END+F9).
- Optionally any video port display adapter or any RTG board can be disconnected from default monitor and connected to other monitor. (Monitor 1 to 4 select box in GUI, 1 = default). Only one signal source can be connected to non-default monitors. Only default monitor support on the fly switching/END+F9 manual switching.
- Native (chipset) video output is always connected to first (default) monitor.
- Each active monitor (WinUAE window) content is refreshed in real-time.
- For example x86 VGA can be now visible at the same time with WB.
- Limitations and other information:
*Windowed mode only (later full-window with single virtual monitor to physical monitor mapping)
*Fullscreen is not supported and won't be supported.
*Direct 3D 9/11 mode only. DirectDraw won't be supported.
*GUI options adjusts all monitors. If native/video port: native filter and all other native related settings are in use for all windows in native/video port mode, if RTG: GUI RTG settings are used for all monitors in RTG mode.
*Non-default monitors are always opened next to default monitor. Positions are not stored.
*It does not matter which window has focus/captured mouse. All windows listen for input normally.
*Non-default windows don't have status bar or OSD and only have name of monitor in title bar.
*Video port device's window opens immediately at startup, RTG board's window open when board's output is enabled with valid display configuration for the first time.

New debugger features:
- http://eab.abime.net/showthread.php?t=91321

Minimal Macrosystem Casablanca "emulation"
- Supports Casablanca ROM images, none of Casablanca special IO address spaces supported. It is has very unknown custom hardware.
- If you want to help with debugging/reverse-engineering Casablanca internals using emulation:
*Set correct ROM, either original 2x512k 1:1 ROM images (ROM scanner supported) or 1x1024M manually merged and byteswapped. (Don't ask me, they contain KS modules, in scrambled format.) If rom starts with "00 00 00 00 00 00 00 18 44 52 42 52 00 01 00 06 ........DRBR...." = correct merged and byteswapped image.
*CPU must be set to 68060 (MMU bus error handler assumes PC always points to faulting instruction, 68040 documentation says it isn't guaranteed)
*MMU emulation must be enabled.
*Chipset extra must be set to Casablanca.
*Other chipset options don't matter.
*RAM must be set manually: Select Z3 Fast #1, set size (32M/64M), tick "Manual configuration", set Address range start = 40000000. (End address is set automatically). Casablanca RAM uses Z3 space but does not use autoconfig.
*Log window should be enabled.
- It "works" if you see lots of casablanca io access log messages, including MMU enable message. (MMU: TC=109dc enabled=0 page8k=0 PC=00000106). Finally it gets in infinite loop with exec partially initialized.
- Because ROM is descrambled and copied to RAM by boot code and MMU is used to remap it to usual $f80000 region, also "zero page" is remapped, you need to enable UAE debugger mmu mapping support (for example "mmu 1" = use current MMU tables to translate user space addresses, 5 = super space) or you most likely get random garbage when using debugger commands.

Other Changes
- Directory harddrives now use uaehf.device as a fake device driver (instead of non-existing uae.device), SysInfo does not anymore crash in Drives page when selecting directory harddrive. (SysInfo bug: it does not check for device driver open failure) HD_SCSICMD is also partially supported in this situation, mainly identification commands that don't access the drive, like READ CAPACITY and INQUIRY. Unsupported commands return Incompatible Medium Installed ($05/$30 00) error.
- Partition hardfiles also support above HD_SCSICMD SCSI commands.
- Don't show loaded config file ".uae" extension in GUI title.
- GUI title didn't show loaded config file if it was loaded from command line or via doubleclicking config file.
- MSVC code analyzer warnings fixed (uninitialized variables, buffer size checks).
- ROM is slow -option only changed $e0-$e8 ROM space timing (wrong end address)
- Toccata recording used wrong interrupt bit.
- Fixed WD33C93 based SCSI controller and no SCSI devices: boot hang (3.6.1)
- If CD was changed and system was reset during change delay, drive become empty and new CD was never inserted.
- DKB RapidFire and SpitFire use same boot rom. Renamed to RapidFire/SpitFire. Only difference seems to be RAM expansion.
- Added Xetec FastTrak, CSA Magnum 40, GVP A1230 Series II, Hardital TQM and MacroSystem Falcon 040 (without SCSI).
- Real harddrive imager attempts to automatically temporarily dismount source drive first.
- Directory filesystem harddrive block size is dynamic adjustment now starts from smaller disk size to also fix WB free space calculation overflow.
- Disk swapper config file data is restored from statefile.
- If memwatch point is watching for blitter accesses, blitter registers at start of blit and current register are output when breakpoint is hit.

Xetec FastTrak:
- 5380 based SCSI controller, byte wide fake DMA, uses MOVEP.L.
- "bootdisk.device" "bootdisk 1.42 (22 Mar 1990)" "Xetec FastTrak Autoboot"

CSA Magnum 40:
- A2000 68040 accelerator.
- 53C710 based SCSI, true DMA.
- ROM is loader only, SCSI driver is installed to RDB LSEG blocks by the installer.

GVP A1230 Series II:
- A1200 68030 accelerator.
- Usual GVP WD33C93 + 24-bit GVP DMA chip combination, with 2 extra external DMA bits to support up to 32M of RAM.
- ROM v5.0 gvpscsi.device.
- Clock not emulated. (DS1994 1-wire clock)

Hardital TQM:
- A1200 68030 accelerator.
- ROM only adds RAM to system.
- Possibly clone of DKB 1230. Nearly identical ROM contents with "DKB1230" string in "hidden" nybble based data!

MacroSystem Falcon 040
- A1200 68040 accelerator.
- Only non-SCSI boot ROM currently available, adds only RAM to system. Uses MOVEP, not 68060 compatible. (SCSI boot ROM wanted!)
Télécharger WinUAE v4.0.0 Beta 1 (32-bit)
Télécharger WinUAE v4.0.0 Beta 1 (64-bit)
Site Officiel de WinUAE
 
 History.dat v1.96 
Vendredi 06/04/18 à 13:04 par Firebrand
Ce fichier informatif pour MAME a été mis à jour avec des données relatives à MAME v0.196.
Télécharger History.dat v1.96
Site Officiel de History.dat
 
 AppleWin v1.27.1.0 
Vendredi 06/04/18 à 13:02 par Firebrand
Une nouvelle version de cet émulateur Apple // a été publiée. Les améliorations sont les suivantes:
- [Change #547] Improve UI and logging when PrintScreen key fails to register.
- [Change #546] Changing Config's 'Disk access speed' now doesn't trigger a restart.
- [Change #540] Config's Benchmark now reports "Pure CPU MHz" for both video update (as before) & full-speed (new).
- [Change #535] Help doc: added a description of Caps Lock behaviour.
- [Change #398] Added new command line switches:
*-h1 : Start with hard disk 1 plugged-in (and auto power-on the Apple II). NB. Hard disk controller card gets enabled.
*-h2 : Start with hard disk 2 plugged-in. NB. Hard disk controller card gets enabled.
*-s7 empty : Remove the hard disk controller card from slot 7.
- [Bug #543] Swapping disks now doesn't swap drive's motor/spinning state.
- [Bug #537] Fix for failing DOS 3.2 INIT.
Télécharger AppleWin v1.27.1.0
Site Officiel de AppleWin
 
 Emu Loader v8.5.3 (mise à jour) 
Jeudi 05/04/18 à 12:24 par Firebrand
Les corrections de bugs continuent avec cette nouvelle version de Emu Loader. Voici de quoi il s'agit:
And the hunt for more bugs continue.
Frontend crash when trying to save emulator default settings from Arcade Emulators Setup screen. Plus, other minor adjustments.

Fixed
- Supermodel3 emulator settings screen was not centered in the desktop
- The "Select" button for "BGFX Shadow Mask" file was not implemented
- Calling "set emulator default settings" from "Arcade Emulators Setup" was not passing the correct emulator filename parameter, resulting in bogus "full_path\emu_cfg_filename.ini" and causing frontend to crash when saving emu default settings

Changed
- Enabled "Save to File" button in madExcept settings (bug report crash dialog)
- Send bug report will no longer zip the .txt; .png files (madExcept)
Télécharger Emu Loader v8.5.3 (mise à jour)
Site Officiel de Emu Loader
 
<< Page précédentePage suivante >>
2001-2024 Planet Emulation