Accueil > News

Organiser Filtrer par machine : Toutes 3DO Amiga Amstrad CPC Apple II Atari Atari 2600 Atari 5200 Atari 7800 Atari ST ColecoVision Commodore 64 Divers Dreamcast Game Boy Game Gear GBA Intellivision Jaguar Laserdisc Lynx MAME Master System Mega Drive MESS MO5 MO6 MSX 1/2 Neo Geo Pocket Neo-Geo CD NES Nintendo Nintendo 64 Non-MAME Odyssey² Oric PC Engine Pippin PlayStation Saturn Super NES Tandy TRS-80 TO7 Virtual Boy WonderSwan ZX Spectrum Type de vue : Liste Détaillée

WolfMESS v0.157

Vendredi 16/01/15 à 12:56 par Firebrand

Cette version de MESS adaptée aux compétitions de hi-scores a été mis à jour avec les dernières sources de MESS. Télécharger WolfMESS v0.157 Site Officiel de WolfMESS

m1.xml 31/12/2014

Jeudi 15/01/15 à 12:10 par Firebrand

Ce fichier permettant la reconnaissance des ROMs pour l'émulateur audio M1 a été mis à jour pour supporter le set v0.157 de MAME. Télécharger m1.xml v31/12/2014 Site Officiel de m1.xml

GameEx v14.02

Mercredi 14/01/15 à 13:36 par Firebrand

Une nouvelle version de ce frontend a été publiée. Seule la partie multimédia a été modifiée: - This release introduces a fully relational movie database module. With full navigation and data for actors, directors, ratings, genres, years and collections. - To use the new feature ensure your movie paths only point to your movies and select ‘Get MetaData” within GameEx. - This release is with special thanks and uses tmdb.org. Télécharger GameEx v14.02 Site Officiel de GameEx

WinUAE v3.1.0 Beta 3 FR (32-bit)

Mardi 13/01/15 à 12:25 par Firebrand

La dernière version de WinUAE a été traduite en français par l'équipe de Tradu-France. Télécharger WinUAE v3.1.0 Beta 3 FR (32-bit) Site Officiel de WinUAE

WinUAE v3.1.0 Beta 3 (32-bit)

Lundi 12/01/15 à 11:36 par Firebrand

Une nouvelle version beta de cet émulateur qu'on ne présente plus a été publiée. Les améliorations sont les suivantes: - Bitplane DMA sequencer emulation rewritten yet again to again match better with real hardware behavior. DDFSTRT and DDFSTOP seems to use hidden counter that counts 4 cycles ahead of real hpos counter. When DDFSTRT matches, next 4 cycles appears to be idle (probably used to init and fill some bitplane dma sequencer shift register?) and after this delay DMA starts normally. Same for stop. Now programs that write to DDFSTRT or DDFSTOP just before, exactly in same cycle or just after it should match now just work without any extra hacks. (Some kind of 4 stage shift register would also explain why changing number of bitplanes by writing to BPLCON0 mid-line always take effect after exactly 4 cycle delay) Can break anything as usual! Correctly breaks SCX_CoolSpot1.adf's intro on ECS Agnus configurations - 512k chip + 512k slow ram + ECS Agnus chip mirroring didn't set slow ram bank with "no memory allocated" flag, could have caused crashes when it was attempted to be freed. - OCS Agnus 512k chip + 512k+ slow and 1M/0.5+0.5 advanced chipset checkbox checked: move slow ram start at $080000. - 68000 bus error and address error exception stack frame's first word undocumented bits 6 to 15 seem to contain opcode of faulted instruction. (from Hatari) - IDE/ATAPI emulation decoupled from Gayle emulation and moved to separate source file. - Added GVP A3001 board with IDE. Apparently Series I and II have different hardware and drivers. (v4 for Series II) Series I IDE emulation seems to be fully working. Non-DMA, gvpat.device, v3.3 added to ROM scanner. Does not byte swap data words but emulation swaps it automatically to keep HDFs compatible with other controllers. - Added ES_SYSTEM_REQUIRED flag to SetThreadExecutionState(), perhaps it keeps screensaver inactive. (ES_DISPLAY_REQUIRED seems to only make sure monitor does not switch to power saving mode) - HAM-E emulation added. Because HAM-E "magic cookie" can be nearly anywhere on screen, enabling HAM-E will slow down emulation (It needs to check nearly all pixels every frame) even when HAM-E mode is not active. "Automatic" setting still only does A2024 and Graffiti detection. DCTV emulation: not going happen without image encoding specs. Télécharger WinUAE v3.1.0 Beta 3 (32-bit) Site Officiel de WinUAE

GameEx v14.01

Samedi 10/01/15 à 12:26 par Firebrand

Ce frontend multi-systèmes orienté multimédia a été mis à jour. Une seule amélioration est à signaler: - Updated XBMC plugin to support Kodi. Télécharger GameEx v14.01 Site Officiel de GameEx

WinUAE v3.1.0 Beta 2 FR (32-bit)

Jeudi 08/01/15 à 12:39 par Firebrand

La dernière beta de WinUAE a été traduite en français par l'équipe de Tradu-France. Télécharger WinUAE v3.1.0 Beta 2 FR (32-bit) Tradu-France

Raine v0.64.2

Jeudi 08/01/15 à 12:38 par Firebrand

Cette nouvelle mise à jour de Raine est encore là pour supprimer une fournée de bugs. Voici de quoi il s'agit: - the return key didn't work anymore in the game selection dialog, fixed and commented, it won't happen again. - the blend options dialog is better and has an immediate effect, no need to reset/reload the game anymore. - prevent the console from growing all the time once it has its scrollbar ! Télécharger Raine v0.64.2 Site Officiel de Raine

MAME Devices Pack v0.157

Mercredi 07/01/15 à 13:29 par Reeko

Suite à plusieurs remarques d'utilisateurs de MAME, nous avons créé ce pack regroupant l'ensemble des ROMs Devices. Ces ROMs sont en fait nécessaires pour l'utilisation de certains sets comme qsound pour les sets CPS-2 par exemple. Comme le Bios Pack, ce pack est à décompresser dans votre répertoire de ROMs. MAME Devices Pack

MAME Plus! XT v0.157 r5201

Mercredi 07/01/15 à 11:13 par Firebrand

Les dérivés XT de MAME Plus! ont été mis à jour vers la v0.157 de MAME. Télécharger MAME Plus! XT v0.157 r5201 Site Officiel de MAME Plus! XT

Mise à jour de la section MAME

Mardi 06/01/15 à 13:21 par Reeko

La rubrique MAME a été mise à jour avec l'ajout des ROMs et CHDs compatibles avec la dernière version de l'émulateur. Rubrique MAME

MAME Plus! v0.157 r5201 (32-bit)

Mardi 06/01/15 à 12:50 par Firebrand

Ce build de MAME a été mis à jour avec les dernières sources de l'émulateur disponibles. Télécharger MAME Plus! v0.157 r5201 (32-bit) Site Officiel de MAME Plus!

WinUAE v3.1.0 Beta 2 (32-bit)

Mardi 06/01/15 à 12:48 par Firebrand

Une nouvelle beta de cet émulateur Amiga pour Windows a été publiée. Les améliorations sont les suivantes: - Paula audio filter still filtered Toccata audio. Note that stereo separation is after Toccata audio mixing. - Added "ROM disabled" to GVP SCSI ROM selection. - GVP SCSI ROM space word reads accessed invalid memory. - Added Paths panel option to store "saveimages" in same directory as original image file, instead of always saving in saveimages-directory, extension changed to .save_adf to prevent it being visible in directory listings with normal disk image filter type active. - 68030 MMU on the fly off->on switch crashed. (Not that on the fly MMU switching is really supported..) - WD33C93 Select without ATN command didn't fully skip message out phase. (AMAX GVP SCSI driver) - Reading WD33C93 SCSI message in with Transfer Info command is a special case, after it finishes, it does not advance to next state automatically, it must wait for Negate ACK command. (AMAX GVP SCSI driver) - AMAX rom "dongle" emulation improved floppy drives didn't work reliably. - Added AMAX rom image selection to ROM panel SCSI select menu, renamed to SCSI/Boot ROMs. - Added very simple next opcode word prefetch emulation to 68030 MMU mode, only done when MMU state changes. Fixes programs that first switch on (or off) MMU which also unmaps memory where currently executing code is located and then executes JMP (An). - Added Toccata recording support, currently only internal hardware emulation is implemented (FIFO and interrupts), returns only zero samples. - Show also inserted data CD volume id (label) in status bar, strip path from file name. - Show inserted floppy image filename and label (if OFS/FFS image) in status bar. - CD image audio can be now mixed with Paula audio, just like Toccata output. CD audio can be finally recorded with internal wave or avi recording support (Requested feature). FPS.Adj also adjusts CD audio speed (and pitch) and CD audio sound sync (For example Liberation CD32 intro) is kept even if emulation slows down. Enable option added to Sound panel (can be switched on the fly but mode only changes when CD audio thread restarts), old method is still the default. Note: when enabled, Paula audio slider becomes master volume for CD audio. - CD32 FMV also supports new audio mixing mode. FPS.Adj not supported yet. Télécharger WinUAE v3.1.0 Beta 2 (32-bit) Site Officiel de WinUAE

Raine v0.64.1

Lundi 05/01/15 à 11:56 par Firebrand

Cet émulateur arcade a encore été mis à jour. Seule la version Windows est disponible pour l'instant. Les améliorations sont les suivantes: - raine was exiting if changing the region or reseting a game which was using bld files - since bld files are incompatible with neocd, bld files for neocd are now read from blend/neocd and there is no file there for now. - There was a problem with the fadeout effect in the associations of wakuwaku7 - I broke some timers while adding cz80 in 0.64.0, which created some hard to find bug in lots of games, including some neogeo games... - There is now a "bld files options" dialog which allows to change the transparency values you want, it's in video options and the values are saved. - I changed the way the audio banking is saved for neogeo, so if you have some neogeo savegames they might not appreciate, sorry for that but it's better now (it won't crash, but maybe the sound will be distorted when reloading the savegame). - there is some experimental code to draw an opaque hud in opengl, well you'd better not use it, it's slow, but I keep it anyway for now (transparent hud is much faster). - also when using sound associations, they were not correctly stopped when loading another game, thanks to another fix for mixed mode games recently. Télécharger Raine v0.64.1 Site Officiel de Raine

History.dat v1.57 (frontends)

Dimanche 04/01/15 à 12:32 par Firebrand

Ce fichier informatif pour MAME et MESS contient des données relatives aux nouveaux jeux supportés par ces émulateurs. Télécharger History.dat v1.57 (frontends) Site Officiel de History.dat

WolfMAME v0.157

Dimanche 04/01/15 à 12:30 par Firebrand

Ce build de MAME apprécié par les compétiteurs de hi-scores a été mis à jour avec les dernières sources de MAME. Télécharger WolfMAME v0.157 Site Officiel de WolfMAME

MAMEUI32 v0.157

Dimanche 04/01/15 à 12:29 par Firebrand

La version 32-bit (non officielle) de MAMEUI est désormais disponible en version 0.157. Télécharger MAMEUI32 v0.157 Site Officiel de MAMEUI32

MAME Bios Pack v0.157

Samedi 03/01/15 à 19:02 par Reeko

Le pack de Bios pour MAME a été mis à jour selon la dernière version de l'émulateur. Comme son nom l'indique, vous trouverez dans ce pack tous les Bios reconnus par l'émulateur et cela pour vous en faciliter son utilisation. Le reste des mises à jour (ROMs/CHDs/Samples) est en cours. MAME Bios Pack

Messinfo.dat v9.01 (MESS v0.157)

Samedi 03/01/15 à 13:13 par Firebrand

Les données de ce fichier informatif pour MESS ont été mises à jour. Voici les modifications apportées: - 8.13 20/12/2014: Updated the SVN until December 20, 2014 (r33931). Updated presence of software lists (92% right) and 72% of authors finded. - 8.14 22/12/2014: Completed the file 'sourcechanges.txt' (0.1 to 0.156). - 8.14 24/12/2014: Completed the file 'changelog.txt' (0.1 to 0.156). Updated the SVN until December 24, 2014 (r34057). - 9.00 26/12/2014: Phase 8 completed! Compressed presence of software lists for all sets (aligned to version 0.156 svn34060). - 9.01 31/12/2014: Added 'softwarelists' complete xml. - 9.02 03/01/2015: Aligned files to 0.157 version (added all new machines with complete infos). Updated this files: 'sourcechanges.txt', 'changelog.txt', 'alltimesMESS.txt' and 'Drivers SVN...txt' and 'supportedMEDIA.txt'. Updated the SVN until November 31, 2014 (r34121). Also updated 'Index of Devices'. Télécharger Messinfo.dat v9.01 (MESS v0.157) Site Officiel de Messinfo.dat

Raine v0.64.00 FIX

Samedi 03/01/15 à 13:11 par Firebrand

Un correctif pour la dernière version de Raine pour Windows a été publié. La version Linux n'est pas affectée. Voici les modifications apportées: - EDIT : new binary for windows, the old one crashed easily for some neocd games, apparently because of some compiler optimization which worked well before. So this is exactly the same binary with -02 instead of -O3, seems to work better, redownload it if you have problems ! - EDIT 2 : it was a cpu optimization problem, the first binary was mistakenly made for k8 instead of pentium3, so it's back to -O3 and pentium3, everything working, sorry for inconvenience (result of some tests for a real 64 bits version which needed to be built for k8). Télécharger Raine v0.64.00 FIX Site Officiel de Raine

Stella v4.5

Vendredi 02/01/15 à 12:47 par Firebrand

Petit saut de version pour la nouvelle mouture de cet émulateur Atari 260. Voici la liste des nouveautés: - The conversion to C++11 has begun :) From this point on, to build Stella you will need a C++11 compatible compiler (Visual Studio 2013, Clang 3.3, gcc 4.9, Xcode 6, etc). Eventually, this will bring more bug-free and (hopefully) faster code. - Fixed major bug with joysticks, where mapping was being lost on reset, the app would crash when plugging/unplugging certain sticks, etc. - Fixed major (but rare) crash that could occur when state files were zero'ed or corrupted. - Added dialog which shows the internal joystick database (all the joysticks that Stella knows about) and the ability to remove (currently unplugged) joysticks from this database. - Added preliminary support for 'WD' (Wickstead Design) bankswitching scheme, used for a previously unreleased prototype ROM. - Improved ZIP file handling, so that it now works as a normal filesystem does (it properly shows nested files and directories). - The debugger 'reset' command now does a complete system reset, instead of simply setting the PC to the reset vector address. - The 'listdelay' command now accepts a value of zero, indicating that list-skipping (jumping to a line in a list by keypress) is disabled. - The 'ctrlcombo' command now has a GUI item, allowing it to be changed from within the application. - Added 'Shift-Alt/Shift-Cmd s' keyboard shortcut, to enable continuous snapshot mode for each frame. This is really only useful if you save snapshots in 1x mode; using it in high-resolution mode is not recommended. Special thanks to SvOlli for the idea and code. - The minimum supported version for the OSX port is now OSX 10.7. Because of this, the 32-bit version is also discontinued, as 10.7 supports 64-bit Intel only apps. - Updated internal ROM properties database to ROM-Hunter version 10 (thanks go to RomHunter for his tireless research in this area). Related to this, updated the snapshot collection. - Updated included PNG library to latest stable version. Télécharger Stella v4.5 Site Officiel de Stella

<< Page précédente

Page suivante >>