 |
|
|
|
|
| Lundi 06/09/10 à 17:54 par Firebrand |
|
Et encore une nouvelle version beta pour WinUAE! Les améliorations du jour sont les suivantes:
- swallow USB keyboard led mode phantom keypresses, do not touch non-enabled keyboard leds, key pressess do not cause lost led state sync anymore. rawinput mode only.
- floppy panel disk image creator can now create FFS and bootable images, pre-formatted extended adf ("custom floppy") will be created if label is set or FFS or bootblock is ticked. (empty label box = label will be "empty" when creation standard adf)
- b1 plugin path detection didn't check exe location\plugins
|
|
|
|
| Samedi 04/09/10 à 12:10 par Firebrand |
|
Un pas de plus vers une nouvelle version stable de cet émulateur qui devrait sortir dans le courrant du mois. Les améliorations sont les suivantes:
- DSKSTEP and DSKSELx going inactive at the same time steps the rw-head normally. Fixes Euro Soccer stupid disk change detection.
- uaehf.device HD_SCSICMD TEST UNIT READY returned an error (HDInstTools works again)
- added 68020 CE-mode very approximate 2-stage CPU prefetch pipeline emulation (not that 68020 don't really have 2-stage prefetch but it still will be more compatible without major changes) Fixes ATR and (partially) Last Ninja 3 CD32 graphics glitches, (missing blitter waits..) also more compatible with self-modifying code
- CD32/CDTV empty "image mode" tried to select physical drive
- added windowed mode configuration GUI setting (borderless, minimal, normal, extended) Extended is WIP and something you (and me?) should ignore
- do not capture mouse if left mouse was clicked and WinUAE window had no focus (now available via GUI = can't be totally useless anymore..)
- borderless mode can be dragged by clicking mouse button once, only double click captures mouse
- fixed epson printing emulation blank page when printing multiple text pages and later pages didn't have any font or font style changes
- more prowizard ripper updates |
|
| ClrMAME Pro v3.135c (32-bits) |
|
| Samedi 04/09/10 à 12:00 par Firebrand |
|
Cet utilitaire de référence a connu 3 mises à jour successives. Voici les changements apportés:
3.135c
- fixed: dupes check was still broken
3.135b
- fixed: rare wrong "no or corrupt chd header/sectormap" message
- fixed: wrong dupe check when clones does have chd(s) while parent doesn't
- fixed: wrong "wrong case" message when using the move set to correct sysdefpath option
3.135a
- fixed: wrong warning about bios storage method in rebuilder when no bios sets are available
- fixed: wrong "error while reading" warning during scan
- misc: double setnames/descriptions are now renamed in any case during parsing dat |
|
|
|
| Dimanche 29/08/10 à 11:00 par Firebrand |
|
Une nouvelle version beta de cet émulateur Amiga pour Windows a été publiée. Les améliorations sont les suivantes:
- addaq.x #x,Ax and subaq.x #x,Ax had too long cycle count (this was really stupid bug)
- joystick type (default,mouse,joystick,analog joystick,etc..) was reset to default when configuration was loaded
- do not decide bitplane dma overriding sprite dma too early, DDFSTRT might get moved few cycles before bitplane dma was originally supposed to start (Heimdall 2 AGA mouse cursor)
- floppy panel DF0: "write-protected" text was getting disabled
- SCSI emulation is only forced if version stored in configuration file is older than 2.3
- CDTV MODE2FORM0 2336 byte sectors didn't work in image mode
- Sherlock Holmes - Consulting Detective separate video tracks hack removed, working full image is available.
- mds subchannel data wrong positioning fixed
- fixed some rare thread syncronization issues when CDA was stopped
- read also standard 2048 byte sectors using SPTI if CDA required SPTI mode, mixing IOCTL and SPTI does not seem to be reliable
- Brian the Lion CD32 starts CDA play at the very end of data track, obviously this must not be an error, only return error if both current start and start + 2s is located inside data track
- files inside archives didn't load if path was relative
- paused CD32/CDTV was resumed after exiting GUI ("old-style" GUI pause/resume was not removed..)
- directories selected via "favorite menu" also sets default path
- prowizard updates
|
|
| ClrMAME Pro v3.135 (32-bits) |
|
| Jeudi 26/08/10 à 19:11 par Firebrand |
|
Une nouvelle version de ce gestionnaire de ROMs de référence a été publiée. Voici la liste des nouveautés:
- added: adv scanner option to automatically move sets in wrong sysdefpaths
- added: chd checksum option to read chd sector map
- misc: don't rebuild cache if newly created dats/exes are identical to others
- misc: added *.xml filemask to setinfo export
- misc: improved dupes scan to find double chd folders
- misc: new option for rename wizard to not rename replaced sets
- misc: some text changes here and there incl. copy/move prompts
- misc: added warning to rebuilder if bios storing methods between scanner/rebuilder differ
- fixed: miss/have lists handle sample-only sets
- fixed: "version not found issue" for 64 bit versions
- fixed: merger ignored sets with chds
- fixed: chd folders in full merged modes can rarely create missing rom messages
- fixed: set stats count for bios only + chd sets |
|
|
|
| Dimanche 22/08/10 à 11:22 par Firebrand |
|
Cet émulateur Amiga au développement bouillonnant vient d'ête une nouvelle fois mis à jour. Les améliorations sont les suivantes:
- : without '\' in harddrive paths was detected as a relative path, automatically add missing '\', it was commonly used in old config files
- CD32 pad in 2-button mode usually returned non-existing 3rd button pressed
- CD32 pad in 2-button mode didn't have pullup resistor emulation (was lost when joystick pullups were removed in 2.2)
- autocorrect CD32/CDTV CDA starting position if R-W subchannel data is detected, workaround for a bug (happens on real CD32 and CDTV too) that can cause missed subchannel frames at play startup causing corrupt or missing CD+G graphics
- CD thread safety critical sections moved to common part from image mounter
- CD image mounter in play state while replacing image: state was still reported as playing
- do not enable rawinput if rawinput capable device is inserted after winuae has been started
- 2x or larger filters changed RTG hardware mouse cursor size.. (D3D + hardware RTG cursor only)
- scsi emulation always-on logging disabled, added -scsiemulog command line parameter |
|
|
|
| Dimanche 15/08/10 à 18:20 par MrBean |
|
Mise à jour de WinUAE, cet excellent émulateur Amiga pour Windows. Certainement le meilleur pour cette plateforme. Il nécessite d'avoir DirectX 8 et ne fonctionne pas sous Windows 9x.
- internal CD audio handling update, status change (starting, started, end, error) callback added, CD32 and CDTV emulation does not poll for state changes anymore, better accuracy in audio start and end timing. CD handling rewrite should be complete now.
- CD image mounter is now thread safe, no more weird and random behavior if mounted image was in use and image was ejected or replaced
- fixed rare crash in display emulation (introduced when right border blanking update was added)
- improved CD32 CD sound/animation timing
- CD32 CD timing now works correctly in NTSC mode (previously used hardcoded PAL values)
- "non-path" kickstart rom configuration file selection now only allows normal KS roms in kickstart_rom variable and extended roms in kickstart_rom_ext variable
- fixed D3D non-shader mode crash introduced in b9
- bogus autofire mode was enabled if same joystick was custom configured in input panel and in gameports panel (missing masking of flags variable, time to wear brown paper bag again..)
|
|
|
|
| Mercredi 11/08/10 à 23:22 par MrBean |
|
Encore une mise à jour en version Beta pour cet émulateur Amiga que l'on ne nomme plus. Voici les nouveautés apportées dans cette Beta 10.
- archive dragndrop worked too well, it unpacked everything, including adf filesystem etc..
- do not expand zipped filename when dragdropping if zip only contains single file
- insert floppy image dialog in disk swapper also "extracts" images inside selected archive
- MODE1 "raw" 2352 data tracks didn't work in CDTV and image mounter + uaescsi.device non-direct scsi mode
- MODE2 FORM1 data tracks didn't work in uaescsi.device SCSI emulation mode
- CDTV mode didn't close CD handle when reseting
- CDTV frame interrupts in non audio CD play mode stopped working (broke when CD+G was implemented)
- overlay height configuration file setting was written incorrectly if it had non-zero value
- statefile configuration entry is not lost when configuration is load and saved again
- scan zip directory even if compression method is unknown
- hardfile scsi emulation block validation checked against physical size, not virtual size: direct-scsi filesystem installed on dynamic hardfile didn't work very well..
- dynamic hdf corrupted data if hdf's physical file size grew over 4G
- bezel overlay support improved, aspect ratio correction, visible area autodetection, (image positioning is not yet pixel perfect)
- pointless bezel configuration file size parameters (temporarily?) removed, bezel overlay configuration needs to be reset (it had stupid design fault)
- DIWSTRT/DIWSTOP writes didn't check if hdiw state should have changed since last hsync (has always been broken but it wasn't really needed until Denise "bug" update in 2.0) fixes Friday at Eight / Polka Brothers |
|
|
|
| Jeudi 05/08/10 à 10:48 par Firebrand |
|
| Cette version de MESS interdisant l'utilisation de codes de triche a été mise à jour avec les dernières sources de l'émulateur disponibles. |
|
|
|
| Mercredi 04/08/10 à 10:40 par Firebrand |
|
Toni Wilen est vraiment très actif car une nouvelle version beta de WinUAE vient de débarquer. Les améliorations sont les suivantes:
- when attempting to play CD32 data track: return normal "playing" status and "play ended with error" flag in next status packet (Mission Impossible 2025 CD32)
- return error status when CD32 qcode command packet is received and currently played CD audio track is about to change (jumping "laser" in CD32 built-in CD player)
- new D3D filter stupid design fault corrected, all 2x or higher D3D shader filters had bad image quality because both internal source and destination textures had identical size..
- select box next to filter name is now D3D shader filter supersampling mode, 1x = normal, 2x = internal texture is twice the size of display etc.. Big texture support required, makes some shader filters look more smoother when combined with bilinear filtering (for example hq2x)
- crash when entering or exiting GUI when ASPI SCSI mode is enabled (b6)
- cd32 pad shift register should stay in reset state in 2-button mode (F17 Challenge CD32)
- added cd insert/eject to systray menu
- added configuration file delayed cd insert, add "delay" to end of path ("cdimage0=,delay"), waits 3 seconds before inserting the cd, workaround for stupid CD32 games that only work if CD is inserted after boot screen (F17 Challenge and Last Ninja 3, maybe others)
- fixed cue+mp3 size detection if mp3 frames included checksum data
- only accept 8 or 32-bit Windows clipboard image input (instead of crashing..)
- diskswapper and floppy/quickstart archive dragndrop: add all disk images inside the archive (I don't know why this was not done ages ago..)
|
|
|
|
| Dimanche 01/08/10 à 20:39 par MrBean |
|
L'équivalent de MAME pour les consoles et les ordinateurs, MESS émule un très grand nombre de systèmes.
|
|
|
|
| Vendredi 30/07/10 à 16:45 par MrBean |
|
Huitième version beta pour cette série 2.3.0 du célèbre WinUAE. Cette Beta 8 a principalement corrigé des bugs reliés à la version précédente.
- GUI configuration panel crash fix (b7)
- do not emulate slow CDA startup in uaescsi.device mode
- blue button was still broken in CD32 pad 2-button mode
- removed obsolete 15-bit fullscreen mode support code
- statefile restore failed if rarely used 68020 M status register bit was set
- added protection against starting new transparent clipboard conversion if previous operation has not finished yet |
|
|
|
| Samedi 24/07/10 à 19:10 par MrBean |
|
Nouvelle update de WinUAE, cette version Beta continue de corriger des problèmes reliés à la gestion des CD. Toni Wilen nous indique les améliorations :
- MP3/FLAC background decompression, no more delayed CDA startup if audio file decompression takes more than 2 seconds
- implemented "delayed decompression" zfile open flag, currently only zip backend supports it and it is only enabled when using CD images. Most zipped CD images with big audio files start almost instantly now
- potential memory corruption crash in zfile_fclose() if file had parent file(s)
- zero length disk DMA (used by some copy protections) never finished, broke in b1
- fixed extra space characters in favorite menu items
- pause uaescsi.device CDA when emulation is paused or GUI is open
- uaescsi.device CDA lights green on screen CD led
- cue/bin audio tracks were completely silent (cue/wav worked)
- on the fly image switching didn't send uaescsi.device change interrupts correctly if CDFS polling flag was disabled (empty drive without diskchange command)
- new dynamic hardfiles have .vhd extension instead of .hdf
|
|
|
|
| Vendredi 23/07/10 à 21:39 par MrBean |
|
Le plus performant et compatible émulateur Amiga pour Windows, WinUAE, vient d'être mis à jour ! Cette nouvelle version Beta apporte principalement des nouveautés en ce qui a trait à les gestion des CD.
- version number bumped to 2.3
- few lines of non-filter scanlines was missing in bottom part of display
- audio DMA start interrupt is now immediate after starting DMA in too fast CPU modes (normally when audio state changes to 5), fixes EasyACDDA hang. Seems to be yet another audio.device bug when CPU and memory is "too fast"..
More CD related changes and updates:
- unified CD32/CDTV CD unit allocation, also internal unit number is always zero = GUI CD media change now work as expected
- CDTV frontpanel Stop now quits frontpanel/CD+G mode correctly
- added more obsolete SCSI commands: PLAY AUDIO TRACK RELATIVE (10) and (12) and PLAY AUDIO (12) (10-byte version was added in b4)
- CDTV subchannel hardware interrupt timing improved, CD+G works in cycle-exact mode now
- cd configuration code cleanups
- added mds/mdf image format (only v1 and first session, v2 appears to be scrambled..)
- cdimage0 in configuration file now disables all following units (backwards compatiblity) add 2 or more cdimage[0-7]= lines in increasing order if you want multiple units configured
- cue/ccd/iso/mds detection in zipped cd images stopped working
- moved 2048 to 2352 byte sector conversion code to generic image mounter code from CD32 emulation, CD32 FMV ROM now detects VideoCDs (and then it hangs)
- mp3 cd audio: detect audio length using ID3v2 TLEN tag if it exists, assume it is CBR MP3 if first 100 frames have equal bit rate, fallback to original slow full file scan if no tags and VBR
- remove mp3 decoding time from audio playback delay time, keeps av sync if decoding takes less than 2 seconds
- FLAC CD audio tracks supported (cue/iso/flac), perhaps this will be useful in future.. (remember to redownload winuaeinclibs.zip if you want to recompile this or future versions)
- note that currently both mp3 and flac decoding needs to finish before playback starts which can take few seconds on slow machines
- some XP-only CD access issues fixed, tested on VMware workstation (donated by Cloanto). VirtualPC sucks too much.
- when looking for cue/iso/ccd/mds inside archives: do not attempt to autodetect (unpack) other files. CD image archives containing audio tracks should start faster now (all audio tracks are still unpacked at startup but previously they were unpacked twice)
Future todo: hardware IDE (ATAPI) and SCSI emulation to CD SCSI emulation connection, no big CD GUI updates until it has been designed. (won't be done in this beta series)
|
|
|
|
| Dimanche 18/07/10 à 19:33 par MrBean |
|
Encore une version Beta publique pour cet émulateur Amiga pour Windows, qui d'ailleurs se trouve à être le meilleur de sa catégorie. Voici donc les améliorations apportées à WinUAE 2.2.1 beta 4 :
- rawinput was disabled if only one keyboard device was detected, input didn't work at all in b3 because of null keyboard (detected only one rawinput keyboard = it was ignore but null keyboard was still added later -> more than one keyboard -> do not fallback to directinput..)
- redirect unknown rawinput messages to null keyboard (shouldn't happen but you never know..)
- spaces not allowed in directory filesystem volume name (wrong validation routine used)
- bottom border was half-blanked in some doublescanned modes
Another major CD update. CD configuration unified, now any CD unit "slot" can point to different CD backend (image mounter + scsi emulation, IOCTL drive + scsi emulation, SPTI drive + scsi passthrough) On the fly changes fully supported. CD mess is nearly gone, code is finally structured logically without special cases. (this finally made SCSI emulation quite easy to implement)
- SCSI emulation is now the default SCSI mode (CDFS and audio tracks always work, switch to SPTI if you need advanced stuff like cd writing) Some audio CD players work for the first time now because some SCSI commands have been obsoleted long time ago like PLAY TRACK/INDEX
- CD audio DAE emulation does not attempt to play data tracks anymore
- added most common CD audio SCSI commands to SCSI emulator, OS3.5+ PlayCD confirmed working. Following new SCSI command added: START/STOP, STOP PLAY/SCAN, SCAN, PLAY AUDIO MSF, PLAY AUDIO, PLAY CD, PLAY TRACK/INDEX, PAUSE/RESUME, READ SUB-CHANNEL, READ TOC, MODE SENSE/MODE SELECT (cd audio volume page only), READ CD and READ CF MSF (only audio extraction supported + subchannel options)
- added CD audio io commands to uaescsi.device (most programs use HD_SCSICMD)
- emulated INQUIRY vendor, product and revision fetched from real device if possible
Testing:
Load your normal WB3.x configuration (that uses uaescsi.device CDROMs), start emulation normally. (This and following betas force SCSI Emulation mode!) Report all changes, including logs, SCSI emulation logging is enabled.
Notes:
GUI selection overrides slot 0, for example if you normally have D:\ = uaescsi.device unit 0 and E:\ = uaescsi.device unit 1, mounting a cd image "ejects" whatever is in unit 0 and replaces it with image file.
If CD32 or CDTV is started in "autodetect" mode and it chose unit 1 or later (CD32/CDTV or Audio CD inserted), unit 0 changes are ignored until original drive becomes empty. This needs to be more intelligent.
|
|
|
|
| Vendredi 16/07/10 à 18:40 par MrBean |
|
Une autre personne qui ne semble pas prendre réellement ses vacances, c'est Toni Wilen, l'auteur du célèbre émulateur Amiga WinUAE. Très actif, monsieur Wilen nous propose encore une version Beta, dont la liste des nouveautés est assez fournie :
Beta 3 (I guess it will be 2.3 after all..)
- most debugger options now accept .b, .w and .l size extension (+special .3 if 3-byte word), old style separate size values (1, 2, 3 or 4) not supported anymore
- debugger 'w' memory freeze mode improved, now also works with copper writes, word and long size freeze values work properly
- fixed right border corruption when horizontal centering enabled
- filesystem access problems fixed (b2, forgotten test code..)
- another "too fast CPU" hack re-added to audio code
- quickstart "disk image requires ks2.0+" message ignored A3000/A4000/CD32 configurations
- skip DMAL emulation in JIT modes
- rawinput supports rawinput packets that have zero scancode but virtual keycode set or null device handle (for example some software injected keys and some keyboard media keys), packets with null device handle are redirected to new "winuae null keyboard"
Major updates in CD related options, IOCTL access, built-in image mounter, CD32, CDTV, uaescsi.device (I started to clean up this mess and I couldn't stop ) :
- cd rom image and IOCTL handling rewritten, unified toc and subchannel data structures
- cd drive/image selection added to harddrives panel (quickstart duplicate, temporary location until real CD selection panel is done.. if ever..) Use this to switch images and drives on the fly, report if switching causes crashes or weird behavior. NOTE: only unit 0 supported in uaescsi.device mode, other units are immediately put to "no disk" state when this option is used for the first time.
- quickstart/harddrives CD "image mode" selected with blank select box: enable image drive without media
- always use IOCTL in CD32/CDTV modes
- only enumarate SPTI devices when uaescsi.device is enabled
- subchannel support added to IOCTL CDROM handling (CD+G)
- CloneCD (.ccd) CD image file support added, including subchannel files
- CD32 CD subchannel DMA channel emulated, CD+G audio CDs supported
- CD32 CD end of play notification only worked if play command was last packet sent
- many CD32 and CDTV on the fly drive/image/media change updates again
- CDTV statefile support added
- CDTV 6525 (CIA-like 3-port IO chip/interrupt controller) emulation rewritten
- CDTV CD subchannel hardware emulated (CD+G, see notes below)
- added CDTV front panel CD player buttons to input event list (they directly control CD mechanism and they are the only buttons that work in CD+G mode)
- "regular" CDTV remote Play/Stop/etc.. input events emulate front panel buttons when CD drive receives enable front panel command, sends "normal" keycodes when frontpanel is disabled
- simple SCSI emulation added to image mounter in uaescsi.device mode (no CD audio support yet) simple means: CDFS in SCSI mode should work with mounted images now, nothing more. (TEST UNIT READY, READ [6,10,12], READ TOC, INQUIRY, READ CAPACITY emulated. Audio CD commands will be implemented in later betas)
- added SCSI emulation option to SCSI GUI panel, enables SCSI emulation when using real drives
- uaescsi.device mounted image file changed without CMD_ADDCHANGEINT or CMD_REMOVE media change interrups: use long 8 second media change delay (CDFS default poll time is ~5s)
CD+G notes: (This is the second most useless and stupid feature ever, only thing that can have bigger time wasted/pointlessness ratio will be CD32 FMV cartridge..)
Some subchannel packets will be lost if emulation slows down too much.
CD+G confirmed working, CD+MIDI should also work but not tested.
CD32 CD+G mode starts automatically, button also in main audio CD screen.
CDTV needs extra steps: In audio CD player screen select "TV/Keyboard" icon in bottom right corner, then press front panel Play-button, only front panel buttons are accepted at this point. NOTE: CDTV CD+G does not (yet) work in cycle-exact mode.
CD32 and CDTV do not correctly handle all CD+G discs, it seems both miss first few subchannel packets at the beginning.. Confirmed on real CD32 and CDTV. They do work in emulation if playback start position is about 1s earlier than asked but this hack is disabled because it can cause cd audio sync issues in games.
|
|
| ClrMAME Pro v3.134b (32-bits) |
|
| Jeudi 15/07/10 à 18:34 par Firebrand |
|
Cet excellent utilitaire de gestion de ROMs a été mis à jour. Les améliorations sont les suivantes:
- misc: changed xml dat detection to be faster for known doctypes
- misc: hide warning about not exisiting folders during batch run
- fixed: one errormessage names addpaths while rompaths are affected
- fixed: progress window doesn't blank out lines when it should do
- fixed: chd only sets with wrong placed chds need a 2 pass scan to appear correctly |
|
|
|
| Jeudi 08/07/10 à 19:37 par MrBean |
|
Le célèbre WinUAE, cet émulateur Amiga pour Windows, vient d'être amélioré. Il s'agit de la deuxième version Beta depuis la version stable 2.2.0, son auteur est très actif ces temps-ci ! Les nouveautés de cette 2.2.1 Beta 2 sont les suivantes :
Beta 1
--------------------------
- fixed Z3/RTG RAM leaking when restarting
- D3D scanlines can be (finally) enabled on the fly
- blank right border after approximate hsync position instead of filling it with border color that extends far outside of displayable area
- ECS Agnus bitplane DMA state machine update, state machine advances on OCS when DDFSTRT matches hpos and display window is open. ECS only requires DDFSTRT match. (yaqube)
- triple/double/single buffer option was never saved to configuration file
- autovsync was broken
- "old" overlays are now masks in plugins\masks, "new" overlays are in plugins\overlays. (rename overlays -> masks and create new overlays directory)
- both overlays and masks can be selected using GUI (overlay position can be only modified by editing configuration file)
- added Automatic center option to autoscale select menu, centers image using autoscale parameters
- audio state machine emulation rewrite, now it is fully cycle-exact, including correct DMAL DMA request line delays. (DMAL logic examined by yaqube, I was too slow and lazy..)
- disk emulation DMA accesses are now fully cycle-exact, emulates DMAL and Paula 3-word FIFO
- fixed ancient bug in disk emulation that emulated remaining cycles in current line twice when disk event triggered (index, word sync), basically made disk rotate twice the speed for about 20 or so bits of data from disk
- above disk events didn't work correctly if multiple drives were selected at the same time (very rare situation)
- added CDROM drives to quickstart CD32/CDTV "autodetect" select menu (works on the fly too)
- cdimage0=:\ at startup didn't work (only worked if changed on the fly)
- rawkeyboard hardcoded F12 check ignored focus
- drive sound emulation crashed if specific sound files were missing
- non-accurate sound enabled -option removed, difference compared to 100% accurate was practically non-existing, also now totally useless chipset sound options removed, disabled but emulated is now also 100% accurate
- files inside plugins-directory will be checked from 3 locations (until found): plugin_path, data_path and exe_path. (fixes some path issues introduced in 2.2)
In cycle-exact mode DMA fetches happen in exactly correct positions (need more CPU power), in non-cycle-exact modes all DMA fetches use audio channel 0 position (faster, less timing events needed). Complete custom chipset should be fully cycle exact now (in theory at least)
All "too fast cpu" audio hacks removed except audio.device AUDxDAT write with AUDxPER=8 and then waiting for interrupt, in JIT modes interrupt code may run fast enough to enable DMA before audio state machine has returned back to idle state. This hack forces AUDxDAT writes with AUDxPER less than 10 to finish immediately.
Beta2
----------------------
- CD32/CDTV image mounting broke in b1 (can still be broken in some situations)
- new audio state machine emulation froze in some situations
- re-added "too fast CPU" hack that fixes missing sounds with sound routines that use CPU loops in DMA waits (also needed in 68020 "CE" mode because short loops are currently too fast)
- automatic audio switching detected idle audio when playing long samples
- CD32 statefile restore ignored possible CD image file path in statefile
- CDTV CD led flicker was practically non-existing when reading data
- (I also noticed CDTV statefile support is still missing..)
- old CD audio timecode relative track position bug fixed (CDTV audio CD player slow time display)
- built-in image mounter cd audio timecode relative track position had 2 second offset
- real cd audio cd playback asked for exclusive CD access when shared also works fine
- do not parse mounted images (cue files) twice when booting in CD32 or CDTV mode
- path update in b1 broke D3D related paths
- CDTV processing thread stalled if no drive was detected when exiting |
|
|
|
| Lundi 28/06/10 à 21:27 par MrBean |
|
Comme prédit dans l'avant-dernière news sur WinUAE, nombreux seront content d'apprendre que le meilleur émulateur Amiga pour Windows vient de passer en une nouvelle version stable, la 2.2.0 ! Après une série de versions beta, voici donc la liste des améliorations séparant la version 2.1.0 de la 2.2.0 :
Major Game Ports and Input GUI update (finally!):
- Quick and easy Game Ports input event remapping support.
- Test mode, check built-in or custom key mappings quickly.
- Also includes simple autofire configuration.
- Game Ports mappings are always merged with Input panel configuration modes (*).
For example when configuring a game pad, you can use Game Ports GUI for basic
configuration and remap extra buttons using Input GUI.
- Input GUI also includes quick test and remap options. Press any key,
joystick or mouse axis or button and selected input target will be
instantly ready for remapping, no more slow and manual searching.
- "Windows mouse" not supported in test or remap modes.
*) Possible compatibility issue with old configuration files in Configuration
#1-3 mode. Workaround: set Game Ports mouse and joystick to none.
Other new features:
- (Pointless) Max 1G Chip RAM support.
- 7zip SDK updated, XZ and PPMD decompression support added.
- Triple/Double/No buffering option added to GUI.
- NTSC checkbox added to Quickstart GUI.
- WASAPI and PortAudio volume control support.
- 68030 data cache emulated (mostly useless currently).
- Save state when emulator is quit configuration file option.
- Show information window while scanning for ROMs.
- Monitor "bezel" overlay image support (configuration file only).
- Floppy sound channel mask (configuration file only).
Bugs fixed:
- CD32 on the fly CD changes, both images and real CDs.
- Autoscale top border position was incorrect in some situations.
- Directory filesystem crash in some situations when attempting
to open non-existing files or directories.
- INTREQR returned bit 15 set in some situations.
- GUI custom CPU frequency was read incorrectly.
- More 68020 "cycle exact" timing fixes (interrupts and blitter).
- 68000 cycle exact too slow CIA interrupt timing.
- Audio filter emulation didn't always follow power led state correctly.
- Amiga to Windows clipboard image sharing failed to convert some image types.
Updates:
- Direct3D shader mode is more compatible with Intel integrated graphics cards.
- Custom chipset compatibility updates (for example Roots 2.0 / Sanity)
- 68020 "cycle exact" mode improvements.
- Direct3D "none" filter allows again all filter setting adjustments.
- On screen Power LED fade emulation improved.
and more, check winuaechangelog.txt for (technical) details.
|
|
| WinUAE v2.2.0 beta 12 (RC3) *fix* |
|
| Lundi 28/06/10 à 01:30 par MrBean |
|
Toni Wilen a publié la douzième version beta de WinUAE 2.2.0, il s'agit ici de la RC3. Cette mise à jour a été suivie d'une correction de bug de dernière minute. Voici le descriptif des corrections :
--- Beta 12 (RC3) ---
- directory filesystem action_read/action_write with length=0 special handling added (host OS routines may have returned weird errors in some situations)
- monitor "bezel" overlay image support added, direct3d and configuration file only. gfx_filter_overlay=:x,y,width,height (only path is mandatory) x and y: position of overlay relative to top/left corner. -1 = center, value% = relative to window size. width and height: width of overlay image. -1 = scale to window size, 0 = use original size, > 0 = scale to this size. value% = scale to window size + %adjustment.
--- * FIX * ---
- Filesystem update had small bug, dos error field was not cleared when read length was zero (I thought it was automatically cleared by filesystem code, it wasn't and previous value was returned to caller resulting in setpatch failing to load rom updates)
À noter que la version finale de WinUAE 2.2.0 devrait sortir aujourd'hui, selon les dires de son auteur.
|
|
|
|
| 2001-2010 Planet Emulation |
 |
|
|
|
|
|
|
